Check Out Our Shop
Results 1 to 5 of 5

Thread: Binding mounting tutorial

  1. #1
    Join Date
    Jan 2008
    Location
    Philadelphia
    Posts
    269

    Binding mounting tutorial

    Is there one on here similar to the ski-tuning tutorial?
    forget the world, give us the earth

  2. #2
    Join Date
    Nov 2004
    Location
    Loakal
    Posts
    512
    There are lots of random thread on this.

    http://www.tetongravity.com/forums/s...freehand+mount

    http://www.tetongravity.com/forums/s...freehand+mount

    But really, all you have to know is to use a 3.6mm drill (9/64") for wood, measure your binding holes accurately, make a paper jig using the dimensions, measure/draw the centerline, drill the holes (9mm depth), fill them with wood glue, and hand drive the screws in. Really, measuring is 3/4 of the battle. The rest is easy.

  3. #3
    Join Date
    Nov 2007
    Location
    sfbay
    Posts
    2,179
    and here

    as well as wildsnow.com has some good content along these lines.

  4. #4
    Join Date
    Jan 2006
    Location
    Iron Range
    Posts
    4,965
    I put up a video a while back. It's boring, but fairly complete.

    http://www.tetongravity.com/forums/s...d.php?t=141411

  5. #5
    Join Date
    Jan 2008
    Location
    Philadelphia
    Posts
    269
    Thanks guys...a friend from home wants to know how to mount bindings and I don't really have the time to make a tutorial for him right now so I thought I would see if anything existed already on here
    forget the world, give us the earth

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •