Fixed my hand nunbness. Rev Grip short review

[Andeh]

They also look heavy.


How much is this numbness a function of everyone going to 35mm bar bore, do you guys think? My Next bars (carbon) seem as still as a 31.8mm aluminum bar. Maybe stiffer.

A lot, especially on the first 35 carbon ones. From personal experience, the RF SixC & Next (unless they're the narrow SL ones) are super stiff. As are the Renthal 35s. Even Renthal 31.8 carbon is stiff AF - I did 1 ride with those and took them off. Newer 35s (in last couple years since OneUp came out) have actually been trying to get back to feeling like 31.8.

[SJG]

Titanium 31.8mm is "soft" without being vague.

[Whiteroom_Guardian]

Titanium 31.8mm is "soft" without being vague.

"Budget" 31.8 ti options? Those Roost bars are real spendy.

Sent from my SM-S918U using Tapatalk

[SJG]

they occasionally pop up on KSL for under $150. I see them every few mos.

[Roxtar]

Posted this in the experts thread but also relevant for hand numbness. I know a few riders who swear by these bars with elastomers to dampen vibrations. https://fasstmtb.com/collections/end...in-bike-enduro

Perfect for those who think RevGrips are too cheap.

[SJG]

Those suspension bars are like $450 and half a pound heavier. I know a couple people who have them though, but I'd never go that route.

[stuckathuntermtn]

A lot, especially on the first 35 carbon ones. From personal experience, the RF SixC & Next (unless they're the narrow SL ones) are super stiff. As are the Renthal 35s. Even Renthal 31.8 carbon is stiff AF - I did 1 ride with those and took them off. Newer 35s (in last couple years since OneUp came out) have actually been trying to get back to feeling like 31.8.

Yeah, I have the next. The 785mm one. Very stiff. LSC adjustment helps a certain amount.
Anyone have any feedback on Deity carbon bars? They make some with a 30mm rise by 810, and I think I might like that. Speedway? I can never keep the names straight.
Probably just get GA2 fats whenever my current grips wear out.

[Andeh]

Yeah, I have the next. The 785mm one. Very stiff. LSC adjustment helps a certain amount.
Anyone have any feedback on Deity carbon bars? They make some with a 30mm rise by 810, and I think I might like that. Speedway? I can never keep the names straight.
Probably just get GA2 fats whenever my current grips wear out.

I can't recall where I read it (maybe LoamWolf?) but in a bar shootout they said that the Deity bars were among the stiffest they'd ever used and did not like them.

If you like normal bar sweep (~8 degrees), just get OneUp. If you like lots of bar sweep, try the PNW carbon one. Both have various rise options.

[stuckathuntermtn]

35mm seems too high for me.

[XXX-er]

back in the day i bought 3 bars of different rises & sweep to try on the bike while sitting in my shed expecting to keep one

Instead I took them all back cuz I couldn't really tell the difference,

I don't really notice bar width either

ymmv but I'm an insensitive bastard eh

[stuckathuntermtn]

I'm apparently a special snowflake. I was afraid they'd be really stiff.

[stuckathuntermtn]

Why do most handlebar designers do rises in 10, 20, and then all the way up to 35mm? Why not more 30mm? I suppose I could lower my stem, but reach on my bike is already really long and steertube is somewhat short. It has the reach adjust thing, which seems like a pain, and as I said, the steertube is kinda short. Just changing bars would be so much easier.

[stuckathuntermtn]

So, nobody knows? It just is?

[Roxtar]

So, nobody knows? It just is?

Some things just is

[stuckathuntermtn]

Some things just is

How it be

[Roxtar]

How it be

It jus be

[Andeh]

Counterpoint: those of us from the Church of Stack wonder why all the 35mm rise bars instead of 40mm.

Also, why do only Renthal & Truvativ make 7 degree sweep bars? I like the more aggressive position it puts my arms in, but Renthals make my hands cry.

[Blatant]

I put on some SC 800 carbon bars. Didn't fix me but seems to be more better, or it's all in my head... Also I've never had carbon and am paranoid I'm going to snap them.

[Andeh]

SC bars appear to be *very* similar to OneUps, which isn't surprising since they have the same parent company. I'm sure there's some slight differences, but the shape profile is the same.

[jakezee]

It helped me to put the pressure on the thick heel of my palm ( instead of having the bar along my first knuckles, where theres not much meat) - I thought it might be similar to how you're meant to hold a sword and looks like it just might be...
https://www.hanbonforge.com/BLOG/How...word-correctly

[stuckathuntermtn]

Anyone have any feedback on Cannondale branded bars? I'd like a tad more width, but the price is right.
https://planetcyclery.com/components...35x800mm-black
I think a lot of my front end stiffness is coming from my Deity stems. I noticed it right away when I went to one on my hardtail with 31.8mm aluminum bars. I like them though. Aside from the fact that they're pretty, they have 5mm hardware so I'm less likely to hamfistedly strip anything when messing with my bar roll like a crazy person. Also, the low stack height helps me get the bars as low as I can on 1 bike and high as I can on the other. Because obviously, I'm insane.

[Roxtar]

I think a lot of my front end stiffness is coming from my Deity stems.

Nope. Just too easy.

[stuckathuntermtn]

Nope. Just too easy.

You may not think that's how it is, but it be.
Wait, are we still doing that?

[stuckathuntermtn]

And by front end stiffness, I'm obviously not referring to actual bike/fork flex, I just didn't have a better word for what I feel with stiff bar/stem combo. I'm thinking I should just try some GA2 fats. Maybe put them on both bikes if I like them. Trying to get pedals/seat/grips to be the same on both, so of course 2 Silverado Chromoly Narrow seats are different padding.