Freeride Systems BASELAYERS....you've been asking

[Whiteroom_Guardian]

Polartec Powerstretch using recycles yarns baselayer tops incoming. We have two colors this time. No fancy names. RED and PURPLE.

12oz per yard weight. 92% poly, 8% spandex. Same weight as the Smurf Blue baselayers we made in years past.






There will be a slight delay as we are tweaking the pattern to make the collar wider.

We also plan to finally do the lounger/base pants we have teased in the past. Same fabric. Same colors. That will be a later run than the baselayer tops. We have to test them first.

SUBSCRIBE. As with other runs we will update this first post as we go along.

PRESALE PRICING: $37 + ship each. (Pounds of Center Cut Bacon gladly accepted but not required.) $69 for 2 + ship

Shirt sizing:

MEASUREMENTS TAKEN FROM SIZE MEDIUM BASELAYER SHIRT FOR SIZING REFERENCE

Use these numbers and compare to a baselayer you already own if looking for some insight on sizing.

Pit to pit across front of chest = 19"

Across back of shoulders at the widest point from top shoulder seam to opposite top shoulder seam = 15.5"

Length of shirt from top seam to bottom hem down back of garment = 27.5"

Top shoulder seam down sleeve to end of wrist cuff = 26"

Bottom hem of shirt at waist opening from side seam to side seam = 18"

No form this time. Just direct to payment link.

BASELAYER SHIRT TOP PRE-SALE PURCHASE LINK. 45-60 day turnaround time.

https://www.freeridesystems.com/prod...-shirt-project

[Phall]

I have an old maroon pullover hoodie that appears to be from that material, i got it used off the site, is that a bross or a baselayer?

[Danno]

YES!!!

[Gepeto]

.....

[Danno]

I have an old maroon pullover hoodie that appears to be from that material, i got it used off the site, is that a bross or a baselayer?

The base layers and the original Bross hoodie are from very similar looking material, but I think the base layer is a wee bit lighter. And to my knowledge the only bases were just shirts, not hoodies.

[fleaches]

Fuck yeah!

Sent from my Pixel 3 XL using Tapatalk

[Cruiser]

Very nice

[Whiteroom_Guardian]

**** Baselayer shirt tops are made from a lighter Polartec grid fabric. Not the same weight as Bross of yesteryear or the Bross Powerair we just made ****

[old mexico]

I need purple in both, by grimaces birthday preferably


Sent from my iPhone using TGR Forums

[shroom]

I just shit my pants so I can buy some of these

[Whiteroom_Guardian]

I need purple in both, by grimaces birthday preferably


Sent from my iPhone using TGR Forums

[adrenalated]

Are you going to do the lounge pants here, or as a new thread?

[Whiteroom_Guardian]

No form this time. Just direct to payment link.

BASELAYER SHIRT TOP PRE-SALE PURCHASE LINK. 45-60 day turnaround time.

https://www.freeridesystems.com/prod...-shirt-project

Are you going to do the lounge pants here, or as a new thread?

Probably do it in this thread or if we do a new thread we will link it from this thread. Pants will be a ways out as we have to test them first.

[east or bust]

In


Sent from my iPhone using TGR Forums

[jhyatt]

I want purple pants

Is top sizing like the hoodies? Basically size down?

Women's available?

And what if I want to order two different sizes?

What's the average airspeed of a migrating swallow?

[Cruiser]

What's the word on sizing? Guessing I'm a medium at 6' 175# with +2 ape index.

[Whiteroom_Guardian]

I want purple pants

Is top sizing like the hoodies? Basically size down?

Women's available?

And what if I want to order two different sizes?

What's the average airspeed of a migrating swallow?

Size UP from Antero for the Baselayer shirts. So someone who wears a Medium Antero shell jacket should order a Large in the baselayer.

If you want to order two different sizes do so and we will refund the 5 dollars. Our lo-fi working man's ecom platform doesn't allow for fancy product setups that automatically detect two different products in the cart and apply the $5 discount unfortunately.

[Danno]

I have no idea about the Antero sizing references, what about the Bross hoodie?

[Whiteroom_Guardian]

I have no idea about the Antero sizing references, what about the Bross hoodie?

If you have a Bross the same should apply. Size up. For instance I wear Medium Antero and Medium Bross and LARGE baselayer top. I can fit into a Medium Baselayer, but it's a little snug.

Your milage may vary though. We got maggots out there that want their baselayers painted on they are so tight and Henrich Harlaut fit on their shells. We also have Maggots that want loose comfort fit baselayers and skin tight randonee steeze on their shells.

[BC.]

For reference, cuz I have multiple colors of them all….great stuff.

6’2 205….FRS athletic fit style….

Bross Hoodies….M
Antero 2+ shells….L
OG Baselayers…XL

Just ordered 1 of each color/ and will get the pants as well when they come up.

[Danno]

Cool, thanks. Assuming I can find a size on the base layer I already own, these are sized the same as the last run? Other than the head hole?

[Whiteroom_Guardian]

Cool, thanks. Assuming I can find a size on the base layer I already own, these are sized the same as the last run? Other than the head hole?

Yes. Sizing remains the same but head hole opened up a bit wider per maggot request.

[stapes]

Subscribed. Thx FRS dudes!

[MakersTeleMark]

Yes. Sizing remains the same but head hole opened up a bit wider per maggot request.

FRS Big Head Tech (tm). Let me know if you want me to test some lounge pants. I can even ship you some Fritz wind pro pants if you want to steal the perfect pattern.

[Danno]

Thanks, WRG and micol! Ordered 2 mediums.