Pomoca Tail Clip

[HudsonH]

This is my second pair of pomoca climb 2.0 skins. The first pair was bought last year and had a yellow tail clip that was thick and fit the ski great. This new one is white and is way too thin to fit on the tail of black crows corvus freebird nor nordica enforcer 110. Cant imagine it would allow enough room for any ski tail for that matter. Was goin on?? Anyone else also have this issue?


Sent from my iPhone using TGR Forums

[L82thegate]

Have the same tail clips on the climb pro S-glides I recently got. They open with more force than I liked & fit on DPS lotus 120 but you might have a thicker tail. The upper curved part has to lay on the ski while the clip is angled upward a bit. Then, kinda rotate downward & the flat bottom piece slides in place. It's not intuitive & you think they might break but it worked once I played with them a bit. Oh, cinch the strap up a bit so the curved part is on the ski. The proper amount of tightness happens when that clip is contacting ski and rotating it pulls the strap putting it in "tension". (light tension)

[I've seen black diamonds!]

Skimo.co sells individual grey ones. They have a larger opening than in that pic. Can measure in a couple days if you want.

Someone here 3D printed a pair. Can't remember where he posted it.

[DGamms]

God bless SkiMo...

[HudsonH]

Ah i got it, kinda finnicky though, i feel like it would be quite annoying on the skintrack


Sent from my iPhone using TGR Forums

[HudsonH]

Have the same tail clips on the climb pro S-glides I recently got. They open with more force than I liked & fit on DPS lotus 120 but you might have a thicker tail. The upper curved part has to lay on the ski while the clip is angled upward a bit. Then, kinda rotate downward & the flat bottom piece slides in place. It's not intuitive & you think they might break but it worked once I played with them a bit. Oh, cinch the strap up a bit so the curved part is on the ski. The proper amount of tightness happens when that clip is contacting ski and rotating it pulls the strap putting it in "tension". (light tension)

That worked thanks


Sent from my iPhone using TGR Forums

[rfconroy]

Skimo.co sells individual grey ones. They have a larger opening than in that pic. Can measure in a couple days if you want.

Someone here 3D printed a pair. Can't remember where he posted it.

Heyo! That was me, and just got to test them out this morning, they worked pretty ok!

Should be publishing the design shortly, and could ship some out in the near future.

[rfconroy]

Published on Thingiverse, but still need some more time to make the changes for BD and Pomoca.

​https://www.thingiverse.com/thing:4682896

[blur]

I purchased the precut version for the 2021 Corvus Freebird, black clip snapped right on. Although if you get the strap to short it is difficult to lengthen & that was in the house. I must be doing something wrong, also I guess no need to change the length once it is set.


Sent from my iPhone using Tapatalk

[tupp_]

Quick Q - has anyone used both the S-Glide and Free Pro? Worth the shorter fibers to get the lighter weight?