Sorry to bump an old thread but how do you remove the turrets from the heel of dynafit rotation bindings? I removed the screw, springs, and plunger and it rotates freely but will not come off of the base.
Sorry to bump an old thread but how do you remove the turrets from the heel of dynafit rotation bindings? I removed the screw, springs, and plunger and it rotates freely but will not come off of the base.
https://www.wildsnow.com/23178/compa...ation-binding/
It's this "bayonet lock" design. I think you twist and pull simultaneously and they come off.
Some assorted Dynafit parts
FT12 heel mounts and toes, plus most of the screws one would need for these. Mounting plate brakes fit up to 108 mm underfoot skis.
The toes were mounted without the 5th front screw for several seasons and now won't fully lock out in climb mode. One might be able to bend the front bit down so they work normally again.
Was thinking $20 + shipping from California for the whole package but happy to part things out.
![]()
I have some B&D 6.4mm toe shims for radical ft 2.0 bindings if anyone is looking.
New in packaging from skimo.
$21 plus shipping , half of skimo's price plus shipping from canada. Shipping is around 10usd
Sent from my SM-A536W using TGR Forums mobile app
Last edited by grinch; 01-19-2024 at 08:36 PM.
I mounted a set of ST the same without that front screw cuz i didnt want to drill for 3 screws across ( due to a remount ) which i felt would weaken that particular ski, I havent had a problem with the lockout not working but I would bet you could bend the frame a bit OR if the 5th screw was used it would probably suck the frame right down flat against the ski
Last edited by XXX-er; 01-20-2024 at 11:11 AM.
Lee Lau - xxx-er is the laziest Asian canuck I know
Ah.... found thread again
ISO
Dynafit Comfort volcano
Dynafit Vertical heel tower (just the top plate)
I donated spare parts to Waddingtons in Whistler. Lmk if you need any of these and I'll make sure they still have them in the bin
Dynafit brakes Radical 110mm
Dynafit toe piece. The X-centre lever is gone. It's the 5 screw older model
Dynafit Speed heel piece. The 10mm adjustment model
Frischi Xenic heel
I think I have a vertical heel tower unless I already gave it away. I can check tmrw night. Feel free to PM me if I forget…
Sent from my iPhone using TGR Forums
Lee, I have two white Vertical ST top plates/heel risers. I'll send you a PM and we can figure out the logistics.
Bookmarks