Check Out Our Shop
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 26 to 50 of 58

Thread: Best Boot Work in SLC

  1. #26
    Join Date
    Apr 2005
    Location
    A LSD Steakhouse somewhere in the Wasatch
    Posts
    13,259
    Quote Originally Posted by Marshal Olson View Post
    totally agree.

    And put another way, don’t get sticker shock if you bring your VW to a Porsche dealer for an oil change.

    but if you have a 911 turbo, there are only a few people you would let work on the car, and it costs what it costs.

    not a knock in either direction. Almost every store in SLC/PC has strong boot fitting. Just choose based on your needs
    i lets the bob mc work on every car evarz made
    Chris was good
    i doubt he gave his tools too and taught my friend
    if a great bootfitter didnt see merit and potential in her
    "When the child was a child it waited patiently for the first snow and it still does"- Van "The Man" Morrison
    "I find I have already had my reward, in the doing of the thing" - Buzz Holmstrom
    "THIS IS WHAT WE DO"-AML -ski on in eternal peace
    "I have posted in here but haven't read it carefully with my trusty PoliAsshat antenna on."-DipshitDanno

  2. #27
    Join Date
    Nov 2018
    Posts
    1,700
    Quote Originally Posted by muted View Post
    Besides world cuppers, only people with fucked up gnarly feet should say it costs what it costs.
    agree.

  3. #28
    Join Date
    Dec 2010
    Location
    西 雅 圖
    Posts
    5,510
    Quote Originally Posted by Marshal Olson View Post
    agree.
    World Cuppers don't pay for bootfitting. The "cost" is spending 15-20 years doing nothing but training to be good at a niche sport, at which time your boot company assigns you a fitter who is invariably top-notch.

  4. #29
    Join Date
    Nov 2018
    Posts
    1,700
    Quote Originally Posted by gregL View Post
    World Cuppers don't pay for bootfitting. The "cost" is spending 15-20 years doing nothing but training to be good at a niche sport, at which time your boot company assigns you a fitter who is invariably top-notch.
    I read it to mean "people skiing in WC-grade boots", not "people who actually compete on the world cup circuit"

  5. #30
    Join Date
    Dec 2010
    Location
    西 雅 圖
    Posts
    5,510
    Quote Originally Posted by Marshal Olson View Post
    I read it to mean "people skiing in WC-grade boots", not "people who actually compete on the world cup circuit"
    Got it. Once in a while I will recommend that route - excellent skier who puts in 50+ days a year with a legit 90-95mm foot - they actually need someone to make the boot skiable (punch/grind/slot the shell to make it flex easier, plane sole and probably add rubber, etc.) and ex-racer boot techs are the best at this.

  6. #31
    Join Date
    Jan 2009
    Location
    Park City
    Posts
    5,118
    I have clearly never had a tight enough last. My Lange plugs are the first boots I haven’t maxed the buckles on. I’m pretty excited, tight through the shaft as well.


    Sent from my iPhone using TGR Forums
    I rip the groomed on tele gear

  7. #32
    Join Date
    May 2015
    Location
    inw
    Posts
    1,278
    Please slap down if this is too thread-drifty

    How specialized a skill is cuff alignment? Or, rephrased, if someone is considered a good bootfitter does that usually include cuff alignment skills?

  8. #33
    Join Date
    Dec 2010
    Location
    西 雅 圖
    Posts
    5,510
    Quote Originally Posted by ntblanks View Post
    How specialized a skill is cuff alignment?
    You can align the cuff yourself with an allen key (assuming it's adjustable). Canting a boot via sole planing/toe routing (or even Cantology and toe routing) is a different matter.

  9. #34
    Join Date
    May 2015
    Location
    inw
    Posts
    1,278
    Quote Originally Posted by gregL View Post
    You can align the cuff yourself with an allen key (assuming it's adjustable). Canting a boot via sole planing/toe routing (or even Cantology and toe routing) is a different matter.
    Ah, I thought there was more to it. Thanks gregL.

  10. #35
    Join Date
    Dec 2010
    Location
    西 雅 圖
    Posts
    5,510
    When people here talk about "building a plug" they are referring to making a true race boot fit and flex to their liking, as well as fit into a binding. It is a time-consuming process.

    Most true race boots come with a thick sole that is not ISO 5355 spec, and won't fit in an alpine binding. A bootfitter with a sole planer needs to make it thinner, and the assumption is they will also tailor the cant angle to your stance while they're at it. Often you also need to grind the top of the toe lug so it's parallel to the bottom of the sole. Not all people who call themselves bootfitters have the requisite tools and skills to do this, and that's assuming they have the skill to assess your stance accurately.

  11. #36
    Join Date
    Dec 2008
    Posts
    1,519
    Quote Originally Posted by gregL View Post
    When people here talk about "building a plug" they are referring to making a true race boot fit and flex to their liking, as well as fit into a binding. It is a time-consuming process.

    Most true race boots come with a thick sole that is not ISO 5355 spec, and won't fit in an alpine binding. A bootfitter with a sole planer needs to make it thinner, and the assumption is they will also tailor the cant angle to your stance while they're at it. Often you also need to grind the top of the toe lug so it's parallel to the bottom of the sole. Not all people who call themselves bootfitters have the requisite tools and skills to do this, and that's assuming they have the skill to assess your stance accurately.
    Exactly. I fit boots in PC for seven years, but I fit them for mostly soft rich tourists. I was really good at it, and this was back in the day when liners sucked and we had to basically build them ourselves. I almost got to the point where I was confident grinding soles, but not quite.

  12. #37
    Join Date
    Apr 2006
    Location
    Wasatch
    Posts
    7,528

    Best Boot Work in SLC

    I went and saw Brent Amsbury at park city ski boots. Had intuition molding, footbed grinding, toe punches and some boot grinding. He warped the toe and boots are toast. He is getting another pair and I will not be going back to him. Time lost 6 hours.

    So my experience not good. He is human and people make mistakes. Just wanted to share for posterity

    Not sure why he did all the punches in the first place. Went back to Mandy and just a mold and no punches required.

    So I recommend you do not go to PC ski boot

    I have had good luck with Mandy at level nine

    Sent from my iPhone using TGR Forums
    Last edited by whyturn; 12-19-2020 at 06:55 PM.
    I need to go to Utah.
    Utah?
    Yeah, Utah. It's wedged in between Wyoming and Nevada. You've seen pictures of it, right?

    So after 15 years we finally made it to Utah.....


    Thanks BCSAR and POWMOW Ski Patrol for rescues

    8, 17, 13, 18, 16, 18, 20, 19, 16, 24, 32, 35

    2021/2022 (13/15)

  13. #38
    Join Date
    Nov 2015
    Location
    SLC
    Posts
    1,034
    Reviving this thread and small rant.

    Anyone have some recs in SLC? Went to a shop today to just get a heat mold and ended up just paying $80 for 10 minutes of measuring my foot. I appreciated the customer service but there needs to be a balance between working with what someone brings in and trying to make a $1500 sale. I get that one size down plus 2 punches on each boot will fit me 10-15% better, but adding some padding in the heal pocket and a small punch on one boot for a boot I currently own is much more financially feasible.

  14. #39
    Join Date
    Oct 2003
    Location
    Ogden
    Posts
    9,758
    Quote Originally Posted by GoSlowGoFar View Post
    Reviving this thread and small rant.

    Anyone have some recs in SLC? Went to a shop today to just get a heat mold and ended up just paying $80 for 10 minutes of measuring my foot. I appreciated the customer service but there needs to be a balance between working with what someone brings in and trying to make a $1500 sale. I get that one size down plus 2 punches on each boot will fit me 10-15% better, but adding some padding in the heal pocket and a small punch on one boot for a boot I currently own is much more financially feasible.
    As in, they wouldn’t do the heat mold until you paid for a foot sizing? Or what happened we exactly?

  15. #40
    Join Date
    Nov 2015
    Location
    SLC
    Posts
    1,034
    Quote Originally Posted by zion zig zag View Post
    As in, they wouldn’t do the heat mold until you paid for a foot sizing? Or what happened we exactly?
    It wasn’t anything egregious but just a bit frustrating when I go in expecting one thing and then leave with $80 less - I think the $80 would be applied to some future work if I wanted to go back but that wasn’t completely clear. I scheduled the appointment and when I got in they asked what I needed and I said a heat mold and maybe a punch. Then he went through and measured my foot, put the boot on, went and grabbed a different boot and recommended I go with the boot he grabbed plus $700 in additional work (footbeds, punches, etc). Also said he wouldn’t recommend heat molding my boot because of the fit.

    Maybe I could’ve just pushed harder to do the mold but was mostly just surprised he tried to upsell me $1500 and felt I’d rather go elsewhere by then.

  16. #41
    Join Date
    Dec 2019
    Posts
    973
    Quote Originally Posted by GoSlowGoFar View Post
    Reviving this thread and small rant.

    Anyone have some recs in SLC? Went to a shop today to just get a heat mold and ended up just paying $80 for 10 minutes of measuring my foot. I appreciated the customer service but there needs to be a balance between working with what someone brings in and trying to make a $1500 sale. I get that one size down plus 2 punches on each boot will fit me 10-15% better, but adding some padding in the heal pocket and a small punch on one boot for a boot I currently own is much more financially feasible.
    Sounds like you went to sports loft lol.

    In the valley I go to JJ at sportsden but am actually taking a trip up to PC next week to have Brent at PC Boot look at my alignment/Canting and footbed.

  17. #42
    Join Date
    Apr 2004
    Location
    SLC
    Posts
    2,866
    Sports Loft?


    Sent from my iPhone using TGR Forums
    If ski companies didn't make new skis every year I wouldn't have to get new skis every year.

    www.levelninesports.com
    http://skiingyeti.blogspot.com/

  18. #43
    Join Date
    Oct 2003
    Location
    Ogden
    Posts
    9,758
    Quote Originally Posted by K1mJ0ngTr1ll View Post
    Sounds like you went to sports loft lol.

    In the valley I go to JJ at sportsden but am actually taking a trip up to PC next week to have Brent at PC Boot look at my alignment/Canting and footbed.
    So I need a liner molded, probably 2-4 punches and maybe take up some room around the ankle with some L-pads. Any idea what I would be looking at cost wise with Brent?

    Or really cost wise anywhere reputable if people have recommendations. Is Mandy still a go to at Level 9?

    A guy I’ve been using for years fucked up what I would consider a simple Intuition heat mold by putting a fold in them, and I’m not sure I want to go back there. Maybe he had an off day but it soured me.

  19. #44
    Join Date
    Mar 2005
    Location
    Vinyl Valley
    Posts
    1,909
    Couple of years ago I had good luck with an Intuition heat mold at Sports Loft on Highland. Guy measured my foot and good to go, out of there in ~1 hour. No upsell

    Little spendy for the molding but so damn comfortable, I'd go back

  20. #45
    Join Date
    Nov 2015
    Location
    SLC
    Posts
    1,034
    Quote Originally Posted by zion zig zag View Post
    So I need a liner molded, probably 2-4 punches and maybe take up some room around the ankle with some L-pads. Any idea what I would be looking at cost wise with Brent?

    Or really cost wise anywhere reputable if people have recommendations. Is Mandy still a go to at Level 9?

    A guy I’ve been using for years fucked up what I would consider a simple Intuition heat mold by putting a fold in them, and I’m not sure I want to go back there. Maybe he had an off day but it soured me.
    Tried booking Mandy at Level 9 but she’s booked until late Dec. Sports Den has their prices listed on the website to give you an idea. I might give them a go. I get that my boots aren’t a true alpine fit but after multiple surgeries on one and dealing with neuromas a little extra room is fine by me at the expense of some power transmission into my edges.

  21. #46
    Join Date
    Oct 2006
    Location
    8530' MST/200' EST
    Posts
    4,635
    my fiance is dealing with a headache. Bought new dalbellos at L9 downtown, guy said, come in and get them molded when you have more time. Makes appt, goes in, different guy says oh, no, ski those first. sends her home. L9 Millcreek says "we dont have reciprocity between stores" so now shes stuck with boots with new 3DensityWrap Max intuiton liners and isnt sure what to do. this is me ranting as i know the benefit of a proper fit/fitter/going to someone.
    "If we can't bring the mountain to the party, let's bring the PARTY to the MOUNTAIN!"

  22. #47
    Join Date
    Dec 2019
    Posts
    973
    I heat my zips in my own oven. Never had an issue.

  23. #48
    Join Date
    Dec 2019
    Posts
    973
    Quote Originally Posted by GoSlowGoFar View Post
    Tried booking Mandy at Level 9 but she’s booked until late Dec. Sports Den has their prices listed on the website to give you an idea. I might give them a go. I get that my boots aren’t a true alpine fit but after multiple surgeries on one and dealing with neuromas a little extra room is fine by me at the expense of some power transmission into my edges.
    Most everyone in the boot area at sportsden can handle a heat mold.

  24. #49
    Join Date
    Nov 2015
    Location
    SLC
    Posts
    1,034
    Quote Originally Posted by K1mJ0ngTr1ll View Post
    Most everyone in the boot area at sportsden can handle a heat mold.
    I figured as much. Could also just go back to doing the rice and sock thing but since my last foot surgery a couple years back I’ve required a little punch on one.

  25. #50
    Join Date
    Apr 2006
    Location
    Wasatch
    Posts
    7,528
    I have good luck with Mandy at L9 in Millcreek. Nice service and good knowledge. She loves cheeses and cookies.

    Click image for larger version. 

Name:	Image1701226981.068993.jpg 
Views:	95 
Size:	165.9 KB 
ID:	477683


    Sent from my iPhone using TGR Forums
    I need to go to Utah.
    Utah?
    Yeah, Utah. It's wedged in between Wyoming and Nevada. You've seen pictures of it, right?

    So after 15 years we finally made it to Utah.....


    Thanks BCSAR and POWMOW Ski Patrol for rescues

    8, 17, 13, 18, 16, 18, 20, 19, 16, 24, 32, 35

    2021/2022 (13/15)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •