WTB: Look PX /Rossignol/Dynastar bindings

[fatnslow]

Looking for some old Look PX/Rossignol/Dynastar series binding with a din of at least 12. Trying to use existing holes on a pair of skis. Let me know if anyone is holding.

[PNW_Skier206]

FKS 140s. $120 shipped.


Sent from my iPhone using TGR Forums

[fatnslow]

FKS 140s. $120 shipped.


Sent from my iPhone using TGR Forums

Thanks for the offer but wrong hole pattern.

[DtEW]

Msg'ed ya.

[fatnslow]

If you don't mind bending the 80mm brakes to fit, I have a set of Axial2 Race binders that would be cheap. Metal heels. Not sure all the screws are there, would have to check.

Any chance you can on me a photo ? Especially the heel piece to verify the hole pattern is the same.

[lemmy]

Dynastar PX18 in great shape with 105 brakes . All metal goodness!! 100.00 shipped

[chaka]

if someone wants my BGs flat I'll have lightly used PX15s for you. brakes are clearing the BG which is what, 116? Where are you at? Im in Seattle area. I'll be posting some more pics of the skis and bindings tonight

[chaka]

fatnslow here's the link to my BG/PX15 thread with updated pics. I can take more of the binders if you are interested.
Feeler-2012-ON3P-Billy-Goats-in-186-with-PX15

[1000-oaks]

** 9/12/20 Update: these are GONE **

If you have a buddy at a ski shop that can scrounge up screws (all but the front toe screws), you can have this pair of PX14 Racing (plastic toes, metal heels) for the price of shipping, probably ~$15 . AFD on one toe fell off, prior owner of bindings glued on a replacement teflon strip. The original teflon is provided if you want to epoxy it back on.

Heel drill pattern is about 18mm x 43mm.

Screws you'll need:

Heel
(4) 29/30mm button or cap heads (measured under head), or slightly longer flat head
(4) 12mm button or cap heads (measured under head), or slightly longer flat head

Toe
(4) 18mm flat heads (measured full length)

** 9/12/20 Update: these are GONE **

[SoVT Joey]

I have a set too. All the screws. Black. I’d take 50 shipped. They are in good shape.


Sent from my iPad using Tapatalk

[waxman]

be aware the "race" PX and SPX as in the pic above use a different hole pattern than the civilian PX/SPX the rear heel screws are 2.5mm +/- closer to the front screws

[fatnslow]

If you have a buddy at a ski shop that can scrounge up screws (all but the front toe screws), you can have this pair of PX14 Racing (plastic toes, metal heels) for the price of shipping, probably ~$15 . Brand new 80mm brakes. AFD on one toe fell off, prior owner of bindings glued on a replacement teflon strip. The original teflon is provided if you want to epoxy it back on.

Heel drill pattern is about 18mm x 43mm.

Screws you'll need:

Heel
(4) 29/30mm button or cap heads (measured under head), or slightly longer flat head
(4) 12mm button or cap heads (measured under head), or slightly longer flat head

Toe
(4) 18mm flat heads (measured full length)

Attachment 319210

I'll take those. PM me a total amount shipping to 97214 and I'll send it tomorrow, my PayPal info is at my office.

[cstefanic]

Bumping the thread, as I'm looking for PX/Axial2 demo heels, of any DIN greater than child/cheerleader.

Also looking for regular PX/Axial2 toes to complete the set.

[Lord Thomas]

Hmmmmmm, think I've got a set of NIB PX12 demo binders, heels and toes, in a box somewhere. Trick is there is one piece missing (think it was one of the tracks?) that I would let go for a bottle of Jim Beam and shipping. If you don't hear back by tomorrow send me a ping to remind me to dig a little more