Check Out Our Shop
Page 1 of 19 1 2 3 4 5 6 ... LastLast
Results 1 to 25 of 456
  1. #1
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271

    Electronics! Falling into the geek rabbit hole.

    I have fallen down a rabbit hole lately. It's not the first rabbit hole, and it certainly won't be the last rabbit hole. But it's a cool one!

    It really got kick started from installing a subwoofer in the wife's land cruiser, and then going crazy building a stereo system on the cheap for the Porsche,

    Click image for larger version. 

Name:	amps complete.jpg 
Views:	810 
Size:	268.0 KB 
ID:	303354

    and I've continued messing around with car stereo stuff on my BMW pretty much non stop since then. I found a really cool amp for sale, and I bought it, and I got home.... and it didn't work. I was kind of pissed, but I decided I would fix it. So lots of googling, and researching, (helps take attention away from fucked up news as well) and I learned how an AB class amplifier works, and how to troubleshoot and diagnose.

    Click image for larger version. 

Name:	full board.jpg 
Views:	748 
Size:	1.78 MB 
ID:	303352

    Well, I fixed that amp. Then I fixed the old Nakamichi receiver I had laying around. Then I fixed an old Pioneer receiver display that wasn't working. Then I signed up for a college level Linear DC circuits course on Coursera so I can actually learn wtf is going on. My math skills need work.

    I decided I wanted to learn to build my own amplifier. I want to design my own circuitry, and build an attractive powerful quality sounding home amplifier. So I am on the first steps. I have built a couple of different small DC to AC to DC power supply circuits. I have built a couple of small basic amplifiers using an operational amplifier chip, to learn how different components interact with the audio signal. Kids think it is fun too. They like pressing wires into the breadboard and seeing waves pop up on the oscilloscope.



    I recently found the matching mono amp for the 4 channel one I already fixed, and it needs to be repaired too.... So learning about Class D amplifiers.

    Stuff is pretty cool. Fun.

    Any other geeks wanna share their projects? It's be cool to find a couple other geeks on here that I could learn a thing or two from.
    sigless.

  2. #2
    Join Date
    Sep 2010
    Location
    Tejas
    Posts
    12,468
    That's badass! Have any soldering tips? That's def one of my weaknesses but I really want to get better at it. SO many things get thrown away that could be fixed but sadly electronics repair is quickly becoming a lost art. Definitely something I want to pursue more but time has been my enemy with the hobby. Good post, basin. Very motivating.

  3. #3
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    Well, for soldering, a clean tip, and an iron that gets hot enough make it much easier. I've been soldering stuff since I was a kid, mainly for rc car stuff. My cheapo one just died. So Amazon is bringing me a fancier temp adjustable one with an adjustable hot air rework station (for surface mount stuff). Stoked. Just find something broken and practice putting stuff on, taking it off, cleaning it up, etc...

    sent from Utah.
    sigless.

  4. #4
    Join Date
    Oct 2006
    Location
    Bellevue
    Posts
    7,519
    Quote Originally Posted by basinbeater View Post
    Well, for soldering, a clean tip, and an iron that gets hot enough make it much easier. I've been soldering stuff since I was a kid, mainly for rc car stuff. My cheapo one just died. So Amazon is bringing me a fancier temp adjustable one with an adjustable hot air rework station (for surface mount stuff). Stoked. Just find something broken and practice putting stuff on, taking it off, cleaning it up, etc...

    sent from Utah.
    If you're doing old and modern stuff check for pb free or pb solder on your boards. Mixing the two can create an alloy that melts at crazy low temperature, ~90C if I recall. It's pretty easy for home use to just use two different tips if you're good about organization

  5. #5
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    Ah. I was not aware. I knew there was leaded and unleaded, but didn't know they have problems when they mix. Good looking out!

    Here is one project I completed....
    Diamond Audio d5 600.4. was only producing sound from channels 3 and 4. So at least I had a functional side to base things off. Ended up being a blown driver transistor. And a couple resistors that also fried. After replacing them, it came back to life.


    https://youtu.be/yI_8fTZE-nc

    The nakamichi, I was able to tackle with the tektronix oscilloscope I recently purchased.
    Seemed to function normal, good voltages at all the rails and stuff, but no sound. So I started tracking the input signal with the scope. I use a simple signal generator app on the phone to put a clean wave in, and I started tracking the signal until it got lost at the input selector switch. Clean switch, works great now.

    Then the pioneer, that one was easy, I pulled the front apart and when twisting, the display would occasional light up. Sure enough, cracked solder joints.

    It's funny how sometimes you just go on a roll.
    Click image for larger version. 

Name:	IMG_20191106_231916.jpeg 
Views:	902 
Size:	98.5 KB 
ID:	303366Click image for larger version. 

Name:	IMG_20191106_231903.jpeg 
Views:	855 
Size:	121.0 KB 
ID:	303367Click image for larger version. 

Name:	IMG_20191107_224118.jpeg 
Views:	923 
Size:	110.9 KB 
ID:	303368Click image for larger version. 

Name:	IMG_20191111_220831.jpeg 
Views:	895 
Size:	81.6 KB 
ID:	303369

    sent from Utah.
    sigless.

  6. #6
    Join Date
    Apr 2004
    Location
    Southeast New York
    Posts
    12,282
    I have some old equipment that could use a little TLC too. I'd particularly like to get at least one of the old tape decks spinning at the right speed so I can hook up a way to digitise about 500 (more?) old live tapes. Winter project...

  7. #7
    Join Date
    Oct 2003
    Location
    Near Perimetr.
    Posts
    3,858
    With that amount of wires, circuits, soldering and remotes, I think DHS will contact you soon for...job opportunities?

    The floggings will continue until morale improves.

  8. #8
    Join Date
    Apr 2012
    Location
    Golden
    Posts
    3,379
    Quote Originally Posted by basinbeater View Post
    I have fallen down a rabbit hole lately. It's not the first rabbit hole, and it certainly won't be the last rabbit hole. But it's a cool one!

    It really got kick started from installing a subwoofer in the wife's land cruiser, and then going crazy building a stereo system on the cheap for the Porsche,

    Click image for larger version. 

Name:	amps complete.jpg 
Views:	810 
Size:	268.0 KB 
ID:	303354

    and I've continued messing around with car stereo stuff on my BMW pretty much non stop since then. I found a really cool amp for sale, and I bought it, and I got home.... and it didn't work. I was kind of pissed, but I decided I would fix it. So lots of googling, and researching, (helps take attention away from fucked up news as well) and I learned how an AB class amplifier works, and how to troubleshoot and diagnose.

    Click image for larger version. 

Name:	full board.jpg 
Views:	748 
Size:	1.78 MB 
ID:	303352

    Well, I fixed that amp. Then I fixed the old Nakamichi receiver I had laying around. Then I fixed an old Pioneer receiver display that wasn't working. Then I signed up for a college level Linear DC circuits course on Coursera so I can actually learn wtf is going on. My math skills need work.

    I decided I wanted to learn to build my own amplifier. I want to design my own circuitry, and build an attractive powerful quality sounding home amplifier. So I am on the first steps. I have built a couple of different small DC to AC to DC power supply circuits. I have built a couple of small basic amplifiers using an operational amplifier chip, to learn how different components interact with the audio signal. Kids think it is fun too. They like pressing wires into the breadboard and seeing waves pop up on the oscilloscope.



    I recently found the matching mono amp for the 4 channel one I already fixed, and it needs to be repaired too.... So learning about Class D amplifiers.

    Stuff is pretty cool. Fun.

    Any other geeks wanna share their projects? It's be cool to find a couple other geeks on here that I could learn a thing or two from.
    Multiple hour long convos with the Radio Shack virgins? It's pretty cool what a few inexpensive components can be made to do.

  9. #9
    Join Date
    Feb 2009
    Location
    On Vacation for the Duration
    Posts
    14,373
    Are you lost?

    OP, I am in awe of your ability. I have a multimeter and the only function I know how use is a continuity check. I could accomplish that with a battery, some wire and a light bulb from my Christmas tree.
    A few people feel the rain. Most people just get wet.

  10. #10
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    Got back into it tonight. I fixed my nakamichi sr4a, (kick ass reciever/amp by the way) and fixed all my other electronic shit, so the other day I went by the local hoarders garage and bough a bunch of stuff.
    I got a nakamichi sr2a reciever, same basic stasis circuit as the sr-4a, fewer features, less power. It was inoperative and showed zero signs of life.
    I fixed it tonight. Initial diagnosis showed power making it to the lower power rails on the main board, but not to the main power rails for amplification, so no sound. Blown fuses on the power supply board, and a bad bridge rectifier. Replaced them tonight, and voila! Sound! It seems to be fixed. I couldn't figure out why all these wires and diodes were on the bottom of the main board, but according to the diagram, they all seem to be going to the right places, and it all checked out. I think I'm done with that one.
    The hoarder also had a nakamichi oms7 top of the line CD player, he said didn't work, seems to work fine. I'll use that with my sr4a. Sounds so gooooood.
    He also had a band and Olufsen beomaster 3000 system, complete, reciever, turntable, and speakers. It does not work. Next project I guess after turkey day.Click image for larger version. 

Name:	IMG_20191124_230223.jpeg 
Views:	672 
Size:	58.8 KB 
ID:	303638Click image for larger version. 

Name:	IMG_20191124_164846_01.jpeg 
Views:	689 
Size:	66.4 KB 
ID:	303639Click image for larger version. 

Name:	nak%202a%20full%20board_LI%20(4).jpeg 
Views:	648 
Size:	161.2 KB 
ID:	303640

    sent from Utah.
    sigless.

  11. #11
    Join Date
    May 2009
    Location
    Cambridge, MA/Jackson, WY
    Posts
    567
    Spidey senses are tingling...

    A good soldering setup will make your life way better. I have a Hakko FX-951 and a Quick 861DW. Hot air is very much necessary for big surface mount stuff. Scope is an MSO 2024, which has some pretty powerful tools for finding glitches in digital comms.

    Audio stuff is a ton of fun. While I was learning about power electronis in college, I had an old seeburg select-o-matic 100 jukebox that I rebuilt in my dorm. It had a full class-A tube amp, and all of the mechanical stuff was controlled by mechanical contacts. Oh, and the death-trap ancient florescent light ballast along with a shaded-pole motor to turn the candy cane things. I'll have to go find some pictures.

    These days, I do mostly mixed-signal stuff for mechatronic devices. Traveling with electronics is entertaining to say the least. I had the terminal at Jackson Hole airport evacuated a few years ago.

  12. #12
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    The only mechatronic thing I have ever heard of was the mechatronic cable sleeve into a BMW transmission. I was like, and they leak. fuck that noise. Sild that car and sticking with the manual 6 speeds.

    More research is needed. I've been studying up on DC power supply circuits quite a bit. I've made a couple of mini power supplies from a power supply on my bread board. They take the 14vdc or so from the power supply and first produce a square wave ac voltage, then through a bridge rectifier, that spits it out into straight DC positive and negative rails.

    Fun stuff.
    I need a hot air setup, I bought a cheapo Amazon China special, and it arrived DOA. Cheap Chinese shit. I'll look at the ones you have.

    sent from Utah.
    sigless.

  13. #13
    Join Date
    May 2009
    Location
    Cambridge, MA/Jackson, WY
    Posts
    567
    If you're not going to use it a ton, look at the Aoyue units. They're loud and will fail with heavy use, but they'll last long enough for you to develop preferences and learn about settings with different solders and components. The quick is a fantastic heavy use unit. It's pretty quiet, though it's got a nasty power converter on the input that'll cause the lights in the room to flicker. I'd also recommend getting a good set of tweezers (Hakko CHP3 and CHP7 from amazon are my two workhorses) and a wire-type tip cleaner. Try a couple different fluxes and see what you like, though try not to breathe it.

    Power converters are a ton of fun. They really combine everything you learn in school - everything has to be carefully chosen to make it perform well in the application, and building controllers to keep them stable across a wide range of loads can be obnoxious, especially when you get into something like a switched-cap or SEPIC converter.

  14. #14
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    Another question. What is the best app (that doesn't cost am arm and a leg for android, and pc, for simulating circuits, so I can play digitally and figure out what I want to try to build for real?

    sent from Utah.
    sigless.

  15. #15
    Join Date
    May 2009
    Location
    Cambridge, MA/Jackson, WY
    Posts
    567
    Quote Originally Posted by basinbeater View Post
    Another question. What is the best app (that doesn't cost am arm and a leg for android, and pc, for simulating circuits, so I can play digitally and figure out what I want to try to build for real?
    I don't know. I would imagine that there are plenty of freeware things that'll keep you entertained. I typically use simulink in matlab (definitely not cheap) and used to use Cadence a long time ago. Several of the microcontroller manufacturers (Microchip in particular) have things like that, but I can't speak to them.

    But I can recommend Paul Sherz, Practical Electronics for Inventors. It does assume some math and basic electronics background.

  16. #16
    Join Date
    Oct 2006
    Location
    Bellevue
    Posts
    7,519
    Quote Originally Posted by basinbeater View Post
    Another question. What is the best app (that doesn't cost am arm and a leg for android, and pc, for simulating circuits, so I can play digitally and figure out what I want to try to build for real?

    sent from Utah.
    I don't do much of this stuff because I mostly touch the digital design and use working designs for power. I'll have to do more of it soon though and I've been occasionally looking at tools.

    Circuitlab.com

    Qucs was a thing. Not sure about it now?

    Linear's LTspice

    Here's a blog post that might be helpful
    https://hackaday.com/2018/08/10/circ...lifier-design/

  17. #17
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    That was a good link. Thanks for that.

    These need to go in the car. Fixed em both.
    Click image for larger version. 

Name:	IMG_20191214_000517.jpeg 
Views:	586 
Size:	114.2 KB 
ID:	306149Click image for larger version. 

Name:	IMG_20191204_220943.jpeg 
Views:	605 
Size:	116.3 KB 
ID:	306150Click image for larger version. 

Name:	IMG_20191120_163653.jpeg 
Views:	589 
Size:	89.7 KB 
ID:	306151Click image for larger version. 

Name:	IMG_20191203_235521.jpeg 
Views:	626 
Size:	124.8 KB 
ID:	306152

    sent from Utah.
    sigless.

  18. #18
    Join Date
    Sep 2014
    Posts
    1,901
    Hats off to ya, basinbeater. I dabbled in car audio installs in the teenage years. At the time it was all about the boom for the subwoof and was primary focus was on maxing out the decibels. Managed to cobble together a pretty decent system that eventually presented a pretty good balance of sq and dbs. MB Quart components for the front end and rear fill. Tuned a nice ported enclosure for a single JL Audio 12w6 sub that pumped out 138 dbs at 40 hertz...gotta love the cabin gain for sub bass in vehicles.

    I've got a boneyard of old home audio amps and receivers stacked in the basement...this post has given me hope to bring them back from the dead.

    One particular favorite/pretty nice sounding Yamaha receiver started exhibiting a background constant buzz/hum. Furthest I got with troubleshooting was removing all the wires, rca plugs, changed speakers/speaker wire, tried different power plug ins...still there, thought it was hooped. Any off the cuff guesses as what it could be?

    I hadn't even considered it up to this point...besides basic googling, do you have any specific websites/links/chat forums that were useful in your process?
    Master of mediocrity.

  19. #19
    Join Date
    Mar 2008
    Location
    northern BC
    Posts
    32,592
    I was in Toronto on a HW course and we toured the Toronto IBM repair facility back in the day, they wanted to show us what they did with the parts we sent back for repair , they would set up to fix a float of boards all at once, i assume the parts would often fail the same way so they could get good at a specific part, they would heat stuff up in a small oven to simulate the computer overheating, I remember the hot air soldering.

    They used to fix something once only and trash it the second time, all the boards were bar coded so they could track each one and how it failed

    I might solder the odd wiring harness but otherwise we never did any component level fixing in the field ... too slow and too unreliable
    Lee Lau - xxx-er is the laziest Asian canuck I know

  20. #20
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    Thar be tunes in that trunk! My 7 year old is making pirate jokes. But anyway, hooked it up, also put in a new headunit in that is fully active capable. Just a quick and dirty to test it and get it sounding good before I decide if this is worth doing a complete install.
    Initial thoughts with just a quick setup, is powerful clean bass, and lots of power available up front. This is by far the most powerful amp I have ever run a subwoofer with. Did I say power yet? Power! Arrrrr!
    Click image for larger version. 

Name:	IMG_20191216_003343.jpeg 
Views:	588 
Size:	114.7 KB 
ID:	306378

    sent from Utah.
    sigless.

  21. #21
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    I have been working on some home stereo stuff in these times of covid quarantine.
    I rebuilt a set of bang and olufsen ms150 speakers. They were bang and olufsens largest passive loud speaker in the early 80s and they are gorgeous. Sound pretty good too!
    I recapped the crossovers, refoamed the 8" mid woofer, and replaced the 10" woofer with peerless units. One of the 3" mid-range driver's had the voice coil separate from the done, so I fixed that as well. I did not have the original stands, so I designed and built some out of 80/20 t slot railing.

    Here they are.
    Click image for larger version. 

Name:	IMG_20200204_211556.jpeg 
Views:	559 
Size:	66.1 KB 
ID:	322789Click image for larger version. 

Name:	IMG_20200316_185641.jpeg 
Views:	565 
Size:	77.9 KB 
ID:	322790Click image for larger version. 

Name:	IMG_20200321_133335.jpeg 
Views:	541 
Size:	76.4 KB 
ID:	322791Click image for larger version. 

Name:	IMG_20200314_223155.jpeg 
Views:	601 
Size:	54.4 KB 
ID:	322792Click image for larger version. 

Name:	IMG_20200319_172110.jpeg 
Views:	549 
Size:	101.7 KB 
ID:	322793

    sent from Utah.
    sigless.

  22. #22
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    More home stereo stuff. I got a old school early model dsp preamp from Sony the other day. It really is very cool, but needed some work. I'll test it out today to see how it sounds post work.
    It is a Sony ta-e1000esd preamplifier. I opened her up and removed the video board, put sockets in for the opamps so I can swap opamps easily and figure out which one I like. I also recapped the entire analog board with high grade nichicon fine gold and muse capacitors. Signal line caps are now Elna silmic ii capacitors. I also went through and reflowed solder on all rca connection (many were dried out and cracked) and reflowed all transistor joints.

    Need to hook it up today and give it a go. I was rather surprised to get it back together and see that it worked again.
    Click image for larger version. 

Name:	IMG_20200323_181403.jpeg 
Views:	566 
Size:	86.9 KB 
ID:	322799Click image for larger version. 

Name:	IMG_20200323_224025.jpeg 
Views:	553 
Size:	71.1 KB 
ID:	322800Click image for larger version. 

Name:	IMG_20200326_232128.jpeg 
Views:	557 
Size:	120.5 KB 
ID:	322801Click image for larger version. 

Name:	IMG_20200329_001626.jpeg 
Views:	589 
Size:	102.1 KB 
ID:	322802Click image for larger version. 

Name:	IMG_20200329_003807.jpeg 
Views:	589 
Size:	74.4 KB 
ID:	322803

    sent from Utah.
    sigless.

  23. #23
    Join Date
    Dec 2005
    Location
    Watching over the valley
    Posts
    5,271
    Oh, and the car amps have increased to 3 and a dsp. The railing I was going to use to build the rack got pilfered and used for those speaker stands and a rack for some jbl amps I have laying around.
    Click image for larger version. 

Name:	IMG_20200105_230207.jpeg 
Views:	751 
Size:	128.3 KB 
ID:	322804Click image for larger version. 

Name:	IMG_20200319_224343_01.jpeg 
Views:	728 
Size:	88.8 KB 
ID:	322805

    sent from Utah.
    sigless.

  24. #24
    Join Date
    Mar 2006
    Posts
    19,965
    Cool to see this stuff. Thanks.

  25. #25
    Join Date
    Oct 2003
    Posts
    1,544
    Quote Originally Posted by basinbeater View Post
    I have been working on some home stereo stuff in these times of covid quarantine.
    I rebuilt a set of bang and olufsen ms150 speakers. They were bang and olufsens largest passive loud speaker in the early 80s and they are gorgeous. Sound pretty good too!
    I recapped the crossovers, refoamed the 8" mid woofer, and replaced the 10" woofer with peerless units. One of the 3" mid-range driver's had the voice coil separate from the done, so I fixed that as well. I did not have the original stands, so I designed and built some out of 80/20 t slot railing.

    Here they are.
    Click image for larger version. 

Name:	IMG_20200204_211556.jpeg 
Views:	559 
Size:	66.1 KB 
ID:	322789Click image for larger version. 

Name:	IMG_20200316_185641.jpeg 
Views:	565 
Size:	77.9 KB 
ID:	322790Click image for larger version. 

Name:	IMG_20200321_133335.jpeg 
Views:	541 
Size:	76.4 KB 
ID:	322791Click image for larger version. 

Name:	IMG_20200314_223155.jpeg 
Views:	601 
Size:	54.4 KB 
ID:	322792Click image for larger version. 

Name:	IMG_20200319_172110.jpeg 
Views:	549 
Size:	101.7 KB 
ID:	322793

    sent from Utah.
    Wow..great work!
    what's so funny about peace, love, and understanding?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •