STH2 forward pressure

[Honey]

Picked up some new sticks (recommendations here were huge, thanks y’all) and I’ve come up out of them twice in a week on turns that per the DINs I wouldn’t expect them too. (Once okay, but twice in a week :/) I didn’t do the mount (I know) but looked at the solly manual and I’m worried the forward pressure on one is a bit off. Unfortunately the pics in the solly manual are at a bit of an angle so I’m not sure what’s reasonable and what they consider flush on the set screw. Attached a pic of the screw at pretty close to perpendicular.

I’m in Jackson for a few days so if any of y’all have a shop here you recommend I can bring em over too to take a look that’d be great too

Thanks y’all


Sent from my iPhone using Tapatalk

[2FUNKY]

Heel needs to move forward a couple clicks. That screw head needs to be flush with the housing. Check toe height as well since the forward pressure is set incorrectly.

[Honey]

Heel needs to move forward a couple clicks. That screw head needs to be flush with the housing. Check toe height as well since the forward pressure is set incorrectly.

Thanks bud!


Sent from my iPhone using Tapatalk