
Originally Posted by
LiveEastSkiWest
My wife and I each own a pair of skis mounted with Attack13 Demo bindings.
I know it's possible to take both the heel and toe pieces off without needing to remove the actual bits that are screwed into the ski itself...and that this can make the skis much easier to stack up for travel/shipping. I'd like to do that, but don't know the first thing about how. So...
1) How do I do that? Any tools required, or can it be done by hand? Does anyone have a link handy to a video that shows what that looks like on this particular model, or in general?
2) Is it necessary, or even recommended, to turn down the DIN settings on either the heel or toe or both before doing this (either for safety or convenience)?
3) When reinstalling the heel and toe pieces, is it "good enough" just to reinstall them to the same places they started in the tracks (i.e. set for proper BSL) or is it necessary to check the forward pressure adjustment, too? (If yes, any videos out there showing how that's done for this model?)
4) How important would it be to get an ASTM test after putting things back together?
Any help/advice much appreciated. Thanks!
Bookmarks