FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

[drifts_]

I have a two full sets of the CAST 1.0 toe mounting screws/plates , a pair of green 18 toes with the CAST conversion but also have old regular plate w 5355 afds, and a pair of the 1.0 touring toes brand new in gold Sent from my iPhone using TGR Forums

interested in just the toes if you want to separate the entire cast setup. also have never skied green 14s id like to swap for less nice green 18s + cash or pivot parts on my end.

[Mustonen]

Send me a pair of orange FKS and I'll divulge my sekrits. :FM:

Finding screws is a PITA--I've been able to find the toe and front (short) heel screws ok, but the 18mm pan heads for the rear heel holes are nigh impossible to find. The cast hardware pack for the 1.0 setup used to include 4 of those for the riser/brake retainer assy--same size. Now I guess you gotta make your own, or use the #2 pozidrive ones from slidewright.

Oh yeah, I stumbled on this a few weeks ago, haven't tried ordering from them:

I need toes specifically. Have some pivots I picked up here and after mounting them to two pairs of skis I’ve realized the screws aren’t the right ones. Smaller head leads to deeper penetration that pops the bases.

I thought it was just me not fully drilling out the toe holes, but on the second experience and closer investigation…. Just a mm or so little pokes under the screw and I shaved ptex down in those spots to adjust. Want to get the right screws though and should probably relieve that pressure on the ski construction, though I expect it will be fine at this point.

[Mustonen]

Oh, and anybody wtt my one fifteen for your one oh five mm brakes? I’d buy an extra set off somebody too. Can always order from Look but trying to be cheap here first.

[old mexico]

Any Utah mags with a pivot jig willing to help me out again.

It’s time for me to mount and try the m pro one oh eights finally


Sent from my iPhone using TGR Forums

[Muggydude]

Binding Mount Paper Templates Binding Mount Paper Templates
https://www.tetongravity.com/forums/...d.php?t=153971

PSA: Mount your own fucking skis. PSA: Mount your own fucking skis.
https://www.tetongravity.com/forums/...d.php?t=232898

Jigs are easier to use, but paper templates get the job done just as well if you’re precise using them

If anyone has 105mm and wants to trade for 115mm I’ll get in line behind mustonen

[DigSki]

Mustonen, what toes screws do you need? I use all inserts now and I have a bunch of older p12/p14 (alpine AFD) screws, and I think a bunch of p15 screws.

[Mustonen]

Pfifteen/eighteen toe screws. If you have eight or sixteen freshish screws I’d pay shipping plus a six pack.

[mattyTru]

I'm looking for two p18 or 15 dildos, hmu if you have, thanks

[skifishbum]

Any Utah mags with a pivot jig willing to help me out again.

It’s time for me to mount and try the m pro one oh eights finally


Sent from my iPhone using TGR Forums

in the MCL9 shop today till 6
tues weds 8-8
or youre welcome to borrow my jig whenever

[DigSki]

Mustonen, I got you. PM me, I can't get it to work on my side cause this site is messed rn

[gwat]

FS: FKS12 in pretty good shape. 130 brakes. Looking for $160 CAD + ship

[soul_skier]

Brand new gold pivot 15s with 95mm brakes, or I can change them out for 115mm brakes used a few days. Comes with GW toe AFD but have a standard alpine one I can swap out with all the screws if that is your preference. Don't know what the going rate is these days, $275 shipped to CONUS or price police if there is better deal out there.

[Marshal Olson]

Anyone need 130 brakes? I’d love to trade them for 105 or 115s.

Thank you in advance!

[old mexico]

Looking for one oh five brakes to buy straight up. Realized I don’t have the brake length to even mount my skis


Sent from my iPhone using TGR Forums

[river59]

Anybody holding dildos? Don't really need the turntables.

[Muggydude]

Anyone have a single one fifteen brake/turntable?


Sent from my iPhone using TGR Forums

[BiggC]

I'm either:* Selling a set of P14 B95s with a broken heel piece (upper adjustment arm is sheared in half), 3 seasons old in decent condition.* Looking to buy a single P14/15/18 95-115mm heel piece

[alpinevibes]

Looking for a Pivot 12 heel piece. Don't need a brake, if that matters. Thanks

[54-46]

Attachment 511425
Helping buddy pass on Pivot 12, regular AFD (non-GW), 115B. Good shape. Black/chrome color. $125 USD + ship.


Sent from my iPhone using TGR Forums

[GSinister]

Looking to trade my new Pivot Eighteen, ninety five mm brakes for a pair of one fifteen mm brakes.

[Mustonen]

I have what you seek gsinister.

[GSinister]

Thanks for your help Mustonen!

[gunnarb94]

I've got forza 3.0 pivot 15s (95 brake) used but in good shape. Anyone want to trade me for a solid color (gold, raw, black, etc.)? Happy to send pics if anyone might be interested.

[bearcub69]

not fs but a random gear question.. couldnt find the pivot gear talk thread
how far out do you guys safely run pivots on the forward pressure? buddy has a bsl thats about 8mm larger than mine, fits in the boot on the outermost marked ring. just curious if thats okay as ive never done it before.
also noticed the dildo becomes easier to move when the binding is adjusted to accomadate a larger bsl

[Mustonen]

Should be fine.