FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

[Just Looking]

quick question in the fks/pivot universe. mixing and matching toes and heels, from say 12 to 18, assuming your using a similar setting, say 12 on a pair of toes, and 12 on a pair of (12, 14 0r 18 heels) or heels / toes switched - all things should be equal: of course ignoring, lawyers, risk managers and wives. any thoughts to the contrary?

[1000-oaks]

^ I wouldn't think twice, but then I'd probably be fine running metal Pivot toes with Soli STH heels, etc. For the record I'm not a disciple of the Pivot heel religion, but like the design of the toes.

[Vitamin I]

quick question in the fks/pivot universe. mixing and matching toes and heels, from say 12 to 18, assuming your using a similar setting, say 12 on a pair of toes, and 12 on a pair of (12, 14 0r 18 heels) or heels / toes switched - all things should be equal: of course ignoring, lawyers, risk managers and wives. any thoughts to the contrary?

I vote YES, mix & match as much as you want. The FKS 12 heel seems to be exact same as FKS 18 heel, except DIN spring strength. The plastic toes for 12 & 14 are very different from the metal toes for 15 & 18, but all those toes are sold with heels that are identical (except DIN spring strength), so feel free to mix & match all those toes & heels.

[Vitamin I]

...
2) I have been told by the parentsthere is still a broken-off male part within the binding... And yes I will appreciate any assistance you could offer for removal methods...!

I've done that repair only once, and I had success dremeling a slot into it, which provided grip for a flathead screwdriver to unscrew it out. Other people recommend spinning it out using an Easy-Out/Screw extractor or reverse drill bit? See details at: https://www.tetongravity.com/forums/...ck-in-heel-arm

Do you want my parts now? Or later after you successfully remove that broken-off arm?

.

[robgoose]

let’s do the part with the male arms to start.... (and assume that I will ultimately be successful in removing the embedded make part)

[Vitamin I]

Last chance to buy parts from me (until Thanksgiving again), before I leave town for a month of WRODs.

.

[jackattack]

cleaning out the garage and just found 3 FKS 18 toe pieces and one heel piece that is missing a half moon. Hit me up if you need something and we will see what we can do.

Also have a full set of Pivot 18 in great shape as well as a brand new never been used pair of Pivot 14.

Lets make a deal

Pm sent

[Natedogg]

Also have a full set of Pivot 18 in great shape as well as a brand new never been used pair of Pivot 14.

Also sent you a PM the other day.

[skiing2skiing]

Looking for Pivot 18s or 15s here!

[wizbang]

Looking for look px, rossignol axial, pivot 18/fks 18 toes. And pivot/fks heels. Open to almost anything. Also need half a pair of the 14s


Sent from my iPhone using TGR Forums

[1000-oaks]

Looking for look px, rossignol axial, pivot 18/fks 18 toes. And pivot/fks heels. Open to almost anything. Also need half a pair of the 14s

If you used your real email address as your username, prepare for attack by spambots from hell.

Ask a moderator to change it for you.

[wizbang]

anyone have anything? lmk know what you have

[Vitamin I]

I am OUT of metal toes (no DIN=15,18 left...but I have plastic toes available in DIN=11,12,14).
I am OUT of FKS heel dildos & half-moons, but I still have heel baseplate parts available for people in need.

I might find more used pairs/parts in April, and will offer them up again.

.

[skiing2skiing]

Really need P15s(preferably) or P18s if anyone is selling them. Broke my old bindings - don't have any for my skis for this season. Thanks!

[teamdirt]

I have a set of p18 with wide brakes. Excellent condition looking to get rid of. Pm me

[wizbang]

I have a set of p18 with wide brakes. Excellent condition looking to get rid of. Pm me

Pm'd


Sent from my iPhone using TGR Forums

[Toddball]

I have some FKS 185s with ~95mm bent brakes here:
https://www.tetongravity.com/forums/...-skinny-brakes

[sruffian]

Anyone holding 130mm brakes?

[wizbang]

looking for metal toes. any din and does not need to be a pair

[GSinister]

PM sent.

[Evil E]

I need a p14 dildo. I never thought I’d ever write anything remotely close to this


Sent from my iPhone using TGR Forums

[durangotang]

I just mounted some old rossi FKS 14 bindings on my skis but my ski tech buddy said that they were so old, I should probably get some new bindings or at least new heel pieces or at the very least, 110-115mm brakes to make them actually fit my ski. Anything out there???? Thanks!
Mickey

[Dee Hubbs]

I just mounted some old rossi FKS 14 bindings on my skis but my ski tech buddy said that they were so old, I should probably get some new bindings or at least new heel pieces or at the very least, 110-115mm brakes to make them actually fit my ski. Anything out there???? Thanks!
Mickey

This is what you need: FKS Base Plate.


Good deals can be found if you look hard enough.

[ZomblibulaX]

I just mounted some old rossi FKS 14 bindings on my skis but my ski tech buddy said that they were so old, I should probably get some new bindings or at least new heel pieces or at the very least, 110-115mm brakes to make them actually fit my ski. Anything out there???? Thanks!
Mickey

I have some 115mm baseplates, in DGO too.

[goran]

Broke some pieces tonight (lesson learned: bending brakes without a vise is a mess, at least for me), PM sent.

Also, to add to the for-sale pile, I have a pair of 18-din FKS Course toes (i.e. not the toes currently sold with pivots). They look to be all metal and are probably indestructible. A pair of lower din plastic versions are listed in the first post. Teflon pads missing in the afds. Price is $shipping if anyone will make use of them.