FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

[ntblanks]

FS: PIVOT/FKS/RACE 18

putting these back into circulation:

https://www.tetongravity.com/forums/...ot-FKS-Race-18

[Burney]

ISO: 95 mm brakes and AFD/pedestal. Picked up some older FKS 155. Need wider brakes and a new AFD. I think the new AFD doesn't fit with the older bindings? So I would need new pedestals if I get the new AFD???

[mlybb]

I’m looking for a replacement piece for my FKS 14s. It’s a plastic (?) semicircle that is part of the turntable housing. Look is quoting me at $50 to replace the housing, but they don’t appear to be in stock.

[Eluder]

I'm looking for 8 Pivot 18 toe screws. I need the longer length that go with the lifters or fit the GW AFD.

[Cozzey]

If anyone has some Pivot 18 heel pieces being tossed around I’d love to hear about it. 120-130mm brake.

[Wes Mantooth]

This may be a long shot but I'm looking for a set of toe screws for some FKS 185s (slightly older set c. early 2000's - not sure the correct term for that generation) so I think the heads are a bit smaller than the newer ones and look like a cross between a flat head and a low head. I just picked up a set that has long screws for racer plates so I'm looking for regular length ones. I have extras for the heels but not for the toes

Still curious if anyone has these or know where I could source replacements

[PeachesNCream]

Still curious if anyone has these or know where I could source replacements

Could you just shave down those long screws?

[river59]

Still curious if anyone has these or know where I could source replacements

Are the heads tapered near the base like these small heads:
https://www.bindingfreedom.com/pozi-...ad-m5-pack-25/

If so, just use a flathead mounting screw. Chuck it up in a drill and spin it across a file to reduce diameter. Same could be done with a low head, if the base is not tapered.

[Eluder]

The set I am searching for are about 20mm

[Wes Mantooth]

Could you just shave down those long screws?

Yup definitely an option if somebody knows the correct length. I don't have an extra set of unmounted toepieces at the moment to measure how much the screws should stick out the bottom

Are the heads tapered near the base like these small heads:
https://www.bindingfreedom.com/pozi-...ad-m5-pack-25/

If so, just use a flathead mounting screw. Chuck it up in a drill and spin it across a file to reduce diameter. Same could be done with a low head, if the base is not tapered.

The head is exactly that - basically just the non machine screw version of those. Smallhead is the term I was looking for, thanks

[Dee Hubbs]

I'm looking for 8 Pivot 18 toe screws. I need the longer length that go with the lifters or fit the GW AFD.

I have a set for you. PM me for details

[phatty]

Anyone willing to swap 115 brakes for 130?

[Dee Hubbs]

Anyone willing to swap 115 brakes for 130?

You HAVE 115s and WANT 130’s?

[phatty]

You HAVE 115s and WANT 130’s?

Sorry, I have 130 and looking for 115.

[the_flying_v]

In search of P18 heels in white with 115 brakes.

[devon]

ISO black plastic brake piece that slides over metal brake arm.

Anyone out there with a replacement or broken brake you can part with....

[gwat]

ISO black plastic brake piece that slides over metal brake arm.

Anyone out there with a replacement or broken brake you can part with....

Wrap it with duct tape.

[shafty85]

Still searching for one (or two) of the crescent moon piece from the heel. Or if anyone is selling any bindings for parts? Located in Canada, so prefer to keep it within country if possible due to the insane cost of shipping out of the US these days.

[homeeey]

I have a broken arm with the plastic in question. I'll send you a PM.

The one I have looks a little different, but it's yours if you want it.

Anyone out there with a replacement or broken brake you can part with....

[D-Roc]

I'm looking for the black piece as well!!

[S.B.]

Looking for 95mm brakes, will buy or I have 115mm to trade

Sent from my SM-G960U using TGR Forums mobile app

[Yawn Peel]

anyone have GW AFD's and looking to trade for Alpine AFD's?

[leroy jenkins]

I'd like a set of new style afds if anyones got a pair.

[HAB]

anyone have GW AFD's and looking to trade for Alpine AFD's?

Pivot 18 or 14/12?

[TheKnife]

Looking for 95mm brakes, will buy or I have 115mm to trade

Sent from my SM-G960U using TGR Forums mobile app

Hey man I was contemplating buying some discounted 18s I found, but they come with 95s and I need 115s. If you want to commit to a trade Ill pull the trigger today!