Feeler - Group Order JesterFit Swap Plates (Binding Freedom)

[SunshineTom]

Im in for a pair or 2

[ACH]

When will decision be made for which other plates (4 per plate) screw pattern would match jesterfit: dynaduke or sollyfit

Cant tell you when, it all hinges on demand.
Keep an eye on the thread, when we get a commitment for 25 units,
Jon will design and post up the CAD drawings (as mentioned in the quotes in your post).

[ACH]

ACH - 1
SunshineTom - 1 (maybe 2)
Avitas - 1
Snowy Spartn - 1
BaNosser - 1
Skidog - 1
Covert - 1
matt - 1
CaliBrit - 1

Depending on how you interpret the count so far, we are at ten units.

If you want to add your name , please copy the list above, paste it into a new post, add your name with the quantity desired.

If you are already on the list and I don't have the right quantity, or you no longer want to be on the list, please copy and past with your updated quantity or status.

[covert]

i thought this would be a no brainer for anyone that rocks vibram soles in and out of bounds...

[ACH]

Are any of you listed below, besides Sunshine Tom,
interested in more then one set?

ACH - 2
SunshineTom - 1 (maybe 2)
Avitas - 1
Snowy Spartn - 1
BaNosser - 1
Skidog - 1
Covert - 1
matt - 1
CaliBrit - 1

[Chugachjed]

I'm on for one

[ACH]

That puts us at 12 ~ 13 sets so far.

Reasons you want these.
• Cheaper than Dukes
• You already have a pair of Jesters and would like to be able to swap across your quiver
• Lighter (by a long shot) than Dukes
• Lighter than FKS (not sure about he Salomons)
• You prefer to roll with an Alpine boot for inbounds/side country
• You prefer to tour with tech bindings and a tour specific boot

ACH - 2
SunshineTom - 1 (maybe 2)
Avitas - 1
Snowy Spartn - 1
BaNosser - 1
Skidog - 1
Covert - 1
matt - 1
CaliBrit - 1
Chugachjed - 1

[Skidog]

I will see how this progresses but I might be out. I am starting to notice the play in the schizo. Doesnt seem due to wear just the design. seems weak at the toe...if i still have them when there are 20+ orders I will re-evalutate.

Thanks.

[CaliBrit]

Check the play with the boot in. It is negligible.

[CaliBrit]

Guess this is dead in the water.

[SupreChicken]

Will me being in for a pair help?

[ACH]

Will me being in for a pair help?

That would bring it to 14 so far, still a ways off for what we need to make the minimum.
CaliBrit may be right, I was hoping that there might be a little more interest.

[ACH]

That puts us at 13 ~ 14 sets so far.

Reasons you want these.
• Cheaper than Dukes
• You already have a pair of Jesters and would like to be able to swap across your quiver
• Lighter (by a long shot) than Dukes
• Lighter than FKS (not sure about he Salomons)
• You prefer to roll with an Alpine boot for inbounds/side country
• You prefer to tour with tech bindings and a tour specific boot

ACH - 2
SunshineTom - 1 (maybe 2)
Avitas - 1
Snowy Spartn - 1
BaNosser - 1
Skidog - 1
Covert - 1
matt - 1
CaliBrit - 1
Chugachjed - 1
SupreChicken - 1

[ACH]

Monday Bump

[UpDog]

Put me in for (2)

[tsproul]

It wasn't clear to me. Maybe I've had too much wine.

Will the plate have the same mounting hole pattern as dynadukes? I already have dynadukes mounted on 2 of my Bro's. I've got a third pair of Bro's in need of a mount. I'd like to be able to just swap plates and switch between Dukes, Jesters and Dynafits. If yes, I'll take plates for 2 sets of plates.

[smyler316]

If they will fit the Dynafit radical then I'm in for one pair for sure, maybe 2.

[smyler316]

Any chance that these plates will support the new Dynafit Beast 16?

[ACH]

It wasn't clear to me. Maybe I've had too much wine.

Will the plate have the same mounting hole pattern as dynadukes? I already have dynadukes mounted on 2 of my Bro's. I've got a third pair of Bro's in need of a mount. I'd like to be able to just swap plates and switch between Dukes, Jesters and Dynafits. If yes, I'll take plates for 2 sets of plates.

Unknown at this time, though that would be my preference as well.
Hopefully Jon can weigh in on that.

If they will fit the Dynafit radical then I'm in for one pair for sure, maybe 2.

Any chance that these plates will support the new Dynafit Beast 16?

The Radical and also likely the Beast have different hole patterns.

That puts us at 15 ~ 17 sets so far (+ another 2 if the mounting pattern corresponds with DynaDuke plates).

Reasons you want these.
• Cheaper than Dukes
• You already have a pair of Jesters and would like to be able to swap across your quiver
• Lighter (by a long shot) than Dukes
• Lighter than FKS (not sure about he Salomons)
• You prefer to roll with an Alpine boot for inbounds/side country
• You prefer to tour with tech bindings and a tour specific boot

ACH - 2
SunshineTom - 1 (maybe 2)
Avitas - 1
Snowy Spartn - 1
BaNosser - 1
Skidog - 1
Covert - 1
matt - 1
CaliBrit - 1
Chugachjed - 1
SupreChicken - 1
UpDog -2

[ACH]

An additional reason you want these:

Marker is offering new model for next season called the Lord SP.



Basically, the toe has two ranges of adjustment that will allow skiers who ski exclusively in boots with rockered soles to use them in an alpine specific binding that has been purposely designed to accommodate them. The hole pattern for the Lord SP is the same as the current Jester platform.

[BaNosser]

.... inbound..

need these plates...

Let's get this done

[ACH]

^^^
Nice!

BTT

[jondrums]

Unknown at this time, though that would be my preference as well.
Hopefully Jon can weigh in on that.

My expectation is that I'd try to match the dynaduke pattern, but that the heel plate wouldn't be mounted in the same place if you don't mount them for dukes.

It would have radical and standard dynafit patterns, but not the new beast.

I'm not sure yet if the new duke EPF would fit on there, cool if it does, but I doubt it. Speaking of which, does anyone have a pair of EPF's? If so, PM me - I need some info. Namely: put the base-plates on a scanner and scan the footprint so I can be sure the plates will support them adequately.

[BaNosser]

John, ACH... I'd take two sets a plates just to get us one closer...

[ACH]

We are now at 15 ~ 16 sets so far (+ another 2 if the mounting pattern corresponds with DynaDuke plates).
9 ~ 10 more sets are needed to get this going.

These will fit:
the new Marker Lord SP
Jester Pros
Jesters
Griffins
Squires
Dynafit radical and standard dynafit patterns

Reasons you want these:
• You have multiple pairs of skis that you would like use a single pair of bindings on
• Will fit the new Lord SP (Alpine binding compatible with touring soles)
• Cheaper than Dukes
• You already have a pair of Jesters and would like to be able to swap across your quiver
• Lighter (by a long shot) than Dukes
• Lighter than FKS (not sure about he Salomons)
• You prefer to roll with your Alpine boot for inbounds/side country (Jesters)
• You prefer to tour with tech bindings with your tour specific boot
• Travel quiver flexibility (pack multiple pairs of skis flat, pack the bindings in your other bag)

ACH - 2
SunshineTom - 1 (maybe 2)
Avitas - 1
Snowy Spartn - 1
BaNosser - 2
Skidog - 1
Covert - 1
matt - 1
CaliBrit - 1
Chugachjed - 1
SupreChicken - 1
UpDog -2
tsproul (is a maybe for 2)