At the risk of floating a concept and seeing it taken by someone else and being pissed at myself later, here's a concept I've been kicking around:
1) Start with ski and 2" wide tape run as long as practical (the longer the better):
2) Set ruler with pins and slot diagonal across ski until pins touch edges. Scribe diagonal with pencil or pen:
3) Rotate the ruler so the pins touch the opposite edges and draw second diagonal. Be sure the pins touch directly across from previous location due to continuously changing ski shape:
4) View from below of pins at touching the edges:
5) Repeat above steps at opposite end of tape and draw straight line from center of X's with long straight edge or snap a string line. Double check with ski center gauge and tweak as needed:
6) Tape binding mount template to center line and BSL, mark, drill and mount with the assistance of the centering ruler.
Flaws with this concept?
Bookmarks