When you look at your bindings when not on the skis, with the screws pushed all the way in, how many threads should be sticking out? Most seem to have four, but the tech gave me a set and only three are sticking out and said they are fine. I just don't want my bindings to rip off...again.
Results 1 to 2 of 2
Thread: Jong screw thread question
-
11-08-2003, 09:24 AM #1
Where am I?
- Join Date
- Oct 2003
- Location
- I woke up in a shower once
- Posts
- 386
Jong screw thread question
I.Q.=36
-
11-08-2003, 11:46 AM #2
Registered User
- Join Date
- Oct 2003
- Location
- Down the valley a bit further on the good side of the 49th
- Posts
- 4,342
I believe binding drill bits are generally 9mm long. As long as the screw extends almost that long (no longer) you should be fine. Number of threads showing is going to vary with thread pitch. If your ski has some sort of metal mounting plate beneath the top sheet the important thing is they make it though that.
It's not so much the model year, it's the high mileage or meterage to keep the youth of Canada happy
Bookmarks