Check Out Our Shop
Results 1 to 8 of 8

Thread: help me understand sidecut

  1. #1
    Join Date
    Jan 2009
    Location
    not here, kansas
    Posts
    306

    help me understand sidecut

    I have recently bought a new pair of skis with my largest sidecut to date. I understand a few things about sidecut but I am trying to put it all together and need some input. I have searched and read chupa's post about sidecut to length ratio but it did not fit my needs. Here is what I know,

    1 the less sidecut the bigger the turn edged turn
    2 the less sidecut the more stable at speed
    3 running length affects the arc of the turn as well.

    here is what i would like to know. the shorter the running length the quicker the turn in relation to the same radius with a longer running length? stiffer ski will hold you on edge firmer? in genreal, I need you guys to tell me what i am missing, I am having a hard time phrasing the question.

    I am going from rossi bandit xxx 195's 30* radius i think
    also have b3's in 195
    and jah loves 30* radius

    the new ski is 191cm 35mm back tip rocker(kinked) so it is a short rise early rise tail
    146-128-133 turn radius 40m i dont know the running length but it looks short, super stiff in the running length, soft tail and 1/2 the tip

    some of you know what ski this is, and specifics would be great but i am looking for an in general responce.

    links?/thanks

    bob
    Falling feels like flying........for a little while.

  2. #2
    jerr's Avatar
    jerr is offline Underwater trapeze artist
    Join Date
    Jun 2006
    Location
    NZ
    Posts
    998

    Talking

    Quote Originally Posted by bobbuilds View Post
    the shorter the running length the quicker the turn in relation to the same radius with a longer running length?
    Do you mean you'll complete the turn faster, as in the ski will have a higher speed due to a shorter running length? I don't know for sure but I believe not. In fact I think it will be slower? But, again, I don't know for sure.

    Quote Originally Posted by bobbuilds View Post
    stiffer ski will hold you on edge firmer?
    Generally, yes

    Why don't you check out this review and see if you can get a feel for an answer to the question you don't really know. Or help you frame it better/at all.
    Nine out of ten Jeremy's prefer a warm jacket to a warm day

  3. #3
    Join Date
    Oct 2009
    Location
    On a FAST QUAD to a place with No Name
    Posts
    543
    Quote Originally Posted by bobbuilds View Post
    the shorter the running length the quicker the turn in relation to the same radius with a longer running length? bob
    It seems to me, that any ski with a specific turning radius, regardless of the running edge length is going to make that radius turn when put on it's edge and held there. The only thing that will make it quicker or slower is the speed the ski is traveling.

    Cheers
    "People ask us to take them skiing, and I'm like, 'REALLY'? I mean if you want to get in an avalanche or just die somehow, then, YEAH, come with US!" - Nathan Wallace

  4. #4
    Join Date
    Jan 2008
    Location
    truckee
    Posts
    24,695
    Don't take turn radius too seriously. Any ski will make any radius carved turn if you know what your doing. What more sidecdut does is let you make a tighter turn with less tipping of the ski which means you can make a tighter carved turn at a slower speed. Same thing applies to softer vs stiffer--it's the bend (reverse camber) that allows the ski to carve--the softer the ski the less speed needed to bend it. As far as length vs radius--many ski manufacturers will give a longer turn radius for the longer ski in a given model. So the shorter ski in a given model will make a little tighter turn than the longer. And stiffer means better edge hold. But my son can take his old soft park skis down steep ice a lot better than I can on my stiff skis. It ain't the ski, and I'm sorry but this stuff belongs on Epic.

  5. #5
    Join Date
    May 2010
    Location
    Innsbruck, Austria
    Posts
    564
    Sidecut can be measured in turn radius. A large turn radius (ie 40 metres) = a small sidecut. A short ie 165 ski with 15m turn radius will carve a turn like a 190 ski with a 15m turn radius - although the longer ski will feel more stable at speed. A small sidectu/large turn radius means the ski won't turn very quickly, and so will feel more stbale in a straight line or big gs carve turns. A totionally (so sidewyas across the ski) ski will have better egde grip.

  6. #6
    Join Date
    May 2007
    Location
    The Right Coast
    Posts
    1,111
    Quote Originally Posted by old goat View Post
    Don't take turn radius too seriously. Any ski will make any radius carved turn if you know what your doing.
    I disagree, you will not be carving slalom turns on a 193 Monster 103, 194 Squad etc. Skis are designed with a specific shape and radius in mind to excel in a given turn. Which is why you have slalom skis have ~13m radius and big-mountain chargers ~40m. This isn't to say big skis can't make small turns but you'll notice that you'll start skidding turns if you push the radius too tight because they're just not designed to carve that tight a turn.

  7. #7
    Join Date
    Aug 2008
    Location
    Where the climate suits my clothes.
    Posts
    5,603

  8. #8
    Join Date
    Jan 2009
    Location
    not here, kansas
    Posts
    306
    seriously, I prefer TGR. I know most of you are advanced skiers who know alot of this, but I ask because I KNOW you know, so I'll take that. alot of the responces are making sense. Time will tell.
    Falling feels like flying........for a little while.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •