Now accepting orders for DynaDukeS binding swap plates

[Ripzalot]

just kidding itll work just fine.

to clarify, i mean will they fold up and tuck away on the smaller waist skis. at some point they're gonna overhang and drag, i just dont know by how much.

/totaldukejong

[hutash]

That's the video I haven't yet edited down to 10 minutes for youtube. basically you use a template and mount based on your BSL, just like any other binding.

Fuck me...read first, then post. Yeah, you say specifically that in your post, my bad.

[jondrums]

Why not just upload the video into two parts? Part 1 could be prepping/layout (ie marking centerline, marking holes, ect) and the second part could be drilling and then actual install. I'd much rather watch 20 minutes with detail then a 10 minute condensed version that is rushed/might leave out obvious steps (i always screw up the obvious steps >.<)

duh. ok, will do. for some reason I was obsessed with trying to get it in one vid, but you're right, it doesn't matter at all!

[Velillen]

duh. ok, will do. for some reason I was obsessed with trying to get it in one vid, but you're right, it doesn't matter at all!

woot i actually contributed for the day! Now the day isnt a complete loss lol.

Have you gone through all the "first round" people? Just curious if i should just mount the dukes now or if i should be expecting a chance at the plate sin a week or two

[TheDon]

The vid's look really good. Jongdrums you're a bad ass.

Can't wait to get mine.

[jondrums]

Instructions for mounting the plates to your skis are now up (in the form of two youtube videos) in the second post.

[DAFTC]

New vids are dubtastic and should be required viewing for any newbs mounting any binders.


Not that they'd end dumb new threads in TT, but maybe combined with

"How to mount skis at home"

[ame="http://www.tetongravity.com/forums/showthread.php?t=168454"]Shop mags: How to mount skis at home? - Teton Gravity Research Forums[/ame]


and "The logic of mounting points"

[ame="http://www.tetongravity.com/forums/showthread.php?t=135931"]Binding mounting - Teton Gravity Research Forums[/ame]


and "Binding mount paper templates"

[ame="http://www.tetongravity.com/forums/showthread.php?t=153971"]Binding Mount Paper Templates - Teton Gravity Research Forums[/ame]


and "How to do basic home tunes"

http://www.skituning101.com/


oh, and maybe a repeat of "How to search" from the sticky

http://tinyurl.com/tgrsearch


they'd answer a bunch of threads before they start.

Now if I could only figure out a way to make a "citizen's arrest" on the unlocked phone offers...

[PNWbrit]

do you have an ETA on these yet?

[TheDon]

do you have an ETA on these yet?

echo

12345

[Ripzalot]

FYI, PM sent last week...no reply....

[TheDon]

^^^Balls. I'm waiting to mount my skis.

[jondrums]

Parts arrive at my house this week, packages will get sent by the end of the week and over the weekend! Its all happening. Apologies for slow PM response, I get a ton every day, and I'm trying to keep up with everything - I will get back to you, and everyone will get their parts as soon as I can.

[Velillen]

Parts arrive at my house this week, packages will get sent by the end of the week and over the weekend! Its all happening. Apologies for slow PM response, I get a ton every day, and I'm trying to keep up with everything - I will get back to you, and everyone will get their parts as soon as I can.

fair to say those of us who didnt get a PM on payment info and stuff didnt make the first cut? Just curious since the Lhasa's are wanting some of this cascade powder and might just have to be mounted straight dukes till plates get here

[jondrums]

^^ if you did not receive a payment PM, you did not make the first batch of 100. definitely mount up your skis and go skiing. The second batch will follow very soon - shipping in the middle part of december. I hate the thought that people are waiting to ski because they're waiting for these parts - but it does light a little fire under me to get these out.

[Yanos]

Me = Stoked!

[Velillen]

^^ if you did not receive a payment PM, you did not make the first batch of 100. definitely mount up your skis and go skiing. The second batch will follow very soon - shipping in the middle part of december. I hate the thought that people are waiting to ski because they're waiting for these parts - but it does light a little fire under me to get these out.

lol im not waiting ot ski by any means! its not time for the brand new lhasa's anyways. Still rocks and the mt. bakers are still doing just fine. I was more curious if it was going ot be like March when the second batch came. I can wait to mount the lhasa's till after christmas as thats probably the first time i'd pull them out anyways

[jondrums]

Parts arrive at my door thursday morning.

Attachment 68144

[TWINS]

You need to get some sleep^^^^^^^^^^^Getting rundown and sick will do us no good here........

[jondrums]

HAHA how do you think I get all this crap taken care of with a full time startup company schedule during the "day"

sometimes TGR is sorta like late night TV is to other people

[hoarhey]

from the Lotus 138 mount point thread...
[ame="http://www.tetongravity.com/forums/showthread.php?p=2612898#post2612898"]Lotus 138 mounting point vs other R/R skis - Teton Gravity Research Forums[/ame]

]

Jondrums, please make the following two plates:

1) Duke a la schizo: Three sets of holes +2, 0, -2 cm

2) Dynafit a la schizo: Three sets of holes +2, 0, -2 cm

Any chance you could do this in your free time??? wink, wink

I'd personally rather see the Duke version first.

[jondrums]

a day late, but they're HERE!
Attachment 68377

[midwest_skier]

So that's what porn is! ^^^^

[TheDon]

Anyone want to let just one of theirs pass to a guy that is waiting to mount his skis? You know, a ski that you won't be skiing right away?

I would totally owe you a solid. Like a sixer of some extra awesome utah beer...

[LightRanger]

Anyone want to let just one of theirs pass to a guy that is waiting to mount his skis? You know, a ski that you won't be skiing right away?

I would totally owe you a solid. Like a sixer of some extra awesome utah beer...

I'm still waiting on surgery on December 16. So if a pair goes to you at no cost to me, and I get my two pairs by the time I'm skiing (I won't be skiing by Christmas, at the very very earliest), then I'm cool with it. Work things out with Jon. I want to get stuff mounted up, but realistically, I won't be on snow for at least a month or two.

[TheDon]

I'm still waiting on surgery on December 16. So if a pair goes to you at no cost to me, and I get my two pairs by the time I'm skiing (I won't be skiing by Christmas, at the very very earliest), then I'm cool with it. Work things out with Jon. I want to get stuff mounted up, but realistically, I won't be on snow for at least a month or two.

Oh Scutski! I owe you big time. Big time. What's your brand? Tell me you're serious...