Results 1,051 to 1,075 of 1728
Thread: Binding Mount Paper Templates
-
05-01-2016, 10:13 PM #1051
-
06-07-2016, 09:36 PM #1052Registered User
- Join Date
- Jan 2011
- Location
- 603
- Posts
- 272
Has anyone noticed anything odd related to the jester template and flexon boots?
I did a test mount on wood prior to re-drilling and the template puts me forward 3+ mm based on the arrow on the boot. I'm trying to use existing heel holes so I'm only using the toe page at 326mm from the center line. The printed template is to scale. 3mm is not that big of a deal but I'm not sure whether I trust the template or boot.
-
08-22-2016, 07:26 AM #1053
Several of the templates on the first post are AWOL [dead].
Was looking for an Axial2 120 template.
It would also be nice if the descriptions were more "descriptive" for each link - that way you didn't have to open each to determine which template each is... ["Attachment 86257" doesn't tell you a lot. ]
TIA!
-Greg
-
08-31-2016, 01:04 PM #1054
Links I tried in the first post under Alpine are all dead. Cyclists in Atlanta beware.
Bump
-
08-31-2016, 01:55 PM #1055Registered User
- Join Date
- Nov 2006
- Location
- idaho panhandle!
- Posts
- 9,988
^Yep, I just checked them as well.
WTF dumfee???
-
08-31-2016, 02:53 PM #1056
http://www.bindingfreedom.com/paper-tempaltes/
^'tempaltes' Heh
-
09-06-2016, 02:03 PM #1057
What am I missing.... I print the fks/pivot template out and my 20cm=8" scale comes out at 7-3/4", I change it to "borderless 8.5x11" and the scale comes out to 8-1/4" .... I don't see any other options to change the scale really, but I'm obviously missing something. I've scrolled through most of these 43 pages for an answer. Any hints? Jong away...
-
09-06-2016, 02:14 PM #1058Registered User
- Join Date
- Nov 2006
- Location
- idaho panhandle!
- Posts
- 9,988
Its in the setting on your printer when you open up the print screen. Can't remember exactly but I print with a Microsoft computer.
-
09-06-2016, 02:25 PM #1059
got it! So I just clicked on the link and tried printing straight from Microsoft edge, no Bueno.
I just had to download the pdf, open it in Adobe Reader and select "print to scale=100%"
jong... OUT
-
09-06-2016, 03:24 PM #1060Registered User
- Join Date
- Nov 2006
- Location
- idaho panhandle!
- Posts
- 9,988
Sweet, now post in MYOFS thread when done!
-
09-12-2016, 11:18 PM #1061
Akkk!
I just took a look at the first post and it looks like all the attached files are gone from the post. I didn't edit the post and remove them, so maybe an update of the forum software or something killed it. Anyone have an old version archived so I can recover which file was which? If not, I'll have to spend quite some time figuring out who verified each template - not that it matters that much anymore
-
09-18-2016, 12:11 PM #1062
I've got a Tyrolia Attack 13 demo template I've done in Illustrator. [It needs a professional re-make by someone with CAD - something like what PowerGuides does would be totally awesome. But all the measurements are on the template itself, so with just a printed version, someone could re-crank it in a few minutes.]
I'm going to start a new thread with the PDF for the template there. If you want to add it to this thread, you're welcome to do so.
-Greg
-
09-19-2016, 05:01 PM #1063but not a marker fanboy
- Join Date
- Apr 2012
- Location
- N@
- Posts
- 394
Jon, about two years ago I saved the .PDFs of all of the alpine templates as well as both Duke templates that I'd be happy to send back over to you. Revision numbers are still saved as part of the original filename. I have 8 templates in all from your original post. Shoot me a PM if you'd like.
-
09-22-2016, 06:52 PM #1064
Plum Yaks... anyone, anyone?
Bueller? Bueller?
-
10-11-2016, 02:51 AM #1065
I finally fixed the broken links on the first page. Somehow the attachments had gotten corrupted.
-
10-24-2016, 09:10 AM #1066AF
- Join Date
- Jul 2008
- Location
- Sandy by the front
- Posts
- 2,345
Searched and no luck Salomon C-5 kids binding, there must be a template out there somewhere???
-
10-24-2016, 10:33 AM #1067Registered User
- Join Date
- Mar 2005
- Location
- Vinyl Valley
- Posts
- 1,812
-
10-24-2016, 10:46 AM #1068Registered User
- Join Date
- Nov 2006
- Location
- idaho panhandle!
- Posts
- 9,988
-
11-04-2016, 12:47 AM #1069Minion
- Join Date
- Nov 2016
- Posts
- 1
most compatible alpine/touring binding patterns?
I'm wanting to install inserts for an alpine binding and a touring binding onto a set of skis, and I'm wondering if anyone has researched which binding combinations play nicest with one another?
For example, if I have Dynafit Radical 2s, which alpine binding would require the least amount of shifting in the patterns? I imagine that someone must have asked this same question already?
-
11-04-2016, 10:21 AM #1070Registered User
- Join Date
- Apr 2006
- Posts
- 52
Just used the Marker Schizo template and it worked perfectly! As an FYI, I taped the toe/heel template together at the midsole point for my boots and then laminated the whole template with a cheap home laminator. You then have a fairly rigid template, no worry about wrinkles, rips, spills, etc.!
-
11-18-2016, 09:03 PM #1071
Binding Mount Paper Templates
Does anyone know if the Duke / Baron / Tour template works for the DEMO version of the F12 Tour binding?
It doesLast edited by TransplantedFromRMNP; 12-15-2016 at 12:33 AM.
stay outta my line
-
11-28-2016, 01:39 PM #1072Minion
- Join Date
- Nov 2016
- Posts
- 1
Marker Squire '17 demo template
Hey guys, I've been looking for a binding template for the new (since season 2015-2016) Marker Squire '17 demo / rental.
Can you guys help me out with a template so I can finally mount my bindings on my ski's?
Thank you in advance!
-
11-30-2016, 04:37 AM #1073Registered User
- Join Date
- Nov 2015
- Posts
- 6
TLT RADICAL ST 2.0 TEMPLATE
Dear people,
I need a Dynafit tlt Radical ST 2.0 mounting template
thanks!
-
12-11-2016, 07:20 AM #1074
See post #592 in this thread (page 25 on my 'puter) and download the first link. I was just looking for this info because I'm looking at buying some previously mounted skis and want to know how my binding holes will line up with the original owner's. I remember this being in this thread but didn't have the download on my current computer. Problem solved.
-
12-30-2016, 07:51 PM #1075
For those mounting Kingpins I can verify LC's templates as accurate. Puts the boot center right on the line and the heal piece near the middle of the track. Holes are all spaced correctly. Thanks LC!
I also tried these http://www.slidewright.com/ski-bindi...o-powderguide/ on a 2x4 and they located the boot center about 1cm forward and the heal piece rear of center on the track.
Bookmarks