In today’s dynamic and quickly evolving business landscape, organizations constantly seek innovative strategies to remain competitive and achieve sustainable growth. This is where management consulting services play a pivotal role.
ive searched but im having trouble finding the sth template if anyone can help out
Anybody have a template for the new marker griffon demo? It no longer matches the previous griffon demo/schizo template.
Sent from my SM-S928U1 using Tapatalk
Lucknau posted one circa 2018 - I've got no experience with the mount itself but he said he'd checked it out. I'm not 100% sure that 2017 Marker demos are == to 2024, but checking a tech manual from here shows that the product ID for the jig for Marker TCX demos in 2022 matched the product ID lucknau mentioned elsewhere in the thread in 2018 - and I'm pretty sure no changes to Marker demos in the past couple of years at least. Would def mount on a 2x4 first to confirm holes and boot center, but it should be a decent start.
Marshal was also asking about new marker demos upthread, he might have found a solution he can share too.
Tyrolia attack and look pivot templates still valid? From 2009
Those two you have to be careful with as there are different paper templates floating around for each that are slightly different, where both have been supposedly verified at one time or another. There is discussion on both probably somewhere in this thread.
My understanding is the following:
For Tyrolia, use Knut Pohl's template (Binding freedom template is off by ~5mm for toe placement)
For Pivot use binding freedom template (Knut Pohl's template is off by ~3mm for toe placement)
You know this will sound like crazy talk but you can just check the binding on the paper to see if its correct
Lee Lau - xxx-er is the laziest Asian canuck I know
Does anyone know if the new Shift2 has the same mounting pattern as the original Shift? TIA.
For those interested here is a Fischer Curv booster plate template.
It currently is unconfirmed and any help confirming would be appreciated. I'll edit it and this post after confirmation. The binding layout tool is in prototype mode and will be offered up too.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
Hey all. I looked around for quite a while, but cannot find a paper templates for Warden 11 MNC. Does anybody have one or a link to one?
Thanks for this - used it yesterday and it is not only 100% accurate but super easy to use with all the reference measurements and detail.
Also for reference I dropped my pivot jig on top of my test mount and confirmed that there is no hole conflict at all between a Duke PT and a Pivot 15/18 mounted to the same BSL at the same ski mount point
Three fundamentals of every extreme skier, total disregard for personal saftey, amphetamines, and lots and lots of malt liquor......-jack handy
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
Does anyone have a paper template for Tyrolia attack demo bindings?
thanks
Bookmarks