Binding Mount Paper Templates

[lucknau]

Guessing this template will also work for current ATK FR 15s - correct?? New binders are in the mail and want to be ready when they arrive. TIA

I used it for the FR14. I think the FR15 has the same hole pattern, but definitely recommend doing a test mount first. Let me know if it works.


:::::@:::::

[GravityDT]

Guessing this template will also work for current ATK FR 15s - correct?? New binders are in the mail and want to be ready when they arrive. TIA

Confirmed. This template also is spot on for the current FR 15's. Just mounted them up on the new Nocta's this am - just in time for the storms

[enginerd]

Also for myself, looking for a Duke PT confirmed template. See a lot of talk about a Jester Rear and a shifted Kingpin front, but as any brave soul actually put together an idiot proof Duke PT template in one place? Need for a 315 BSL

Bump...

[AlpiNord]

[enginerd]

Oh awesome! Thank you!

For folks curiosity, I went ahead and compared hole patterns on the above before I saw Alpinord’s post.

The kingpin toe seems perfect. The Jester rear might be a mm short (or my print settings might be a mm off…I did check. It’s close. Anyway, I was going to say close enough if you don’t have a proper template but now we do!

Did not compare the BSL alignment, just the hole pattern.

Pics:






Sent from my iPhone using TGR Forums

[telemarek]

Anyone have info on the strive hole pattern?
Same as STH2? Or Warden? Or both?

[MottN]

Anyone have info on the strive hole pattern?
Same as STH2? Or Warden? Or both?

Strive 12&14 match warden 11
Strive 16 matches warden 13
(both toe patterns are the same but the heels are different between the two)

[telemarek]

Thanks Dude!

[ASmileyFace]

Trying to help a buddy out who just got some Salomon Stage 10 bindings for his kid, I never saw these before, does anyone know if these are the same hole pattern as the Strive or any other existing bindings?

Any info on this? I cannot get the Stage to match anything I've seen before.

[Duffman]

Any info on this? I cannot get the Stage to match anything I've seen before.

This is second hand info, so confirm first, but according to my buddy it matched the Warden 11 hole pattern.

Sent from my Pixel 7 using Tapatalk

[ASmileyFace]

This is second hand info, so confirm first, but according to my buddy it matched the Warden 11 hole pattern.

Sent from my Pixel 7 using Tapatalk

I held it over my warden 11 jig yesterday and it didn't seem to work. The heel track matched, but the toe was different. I was busy with some other stuff so I didn't look into it more, and the guy picked his bindings up before I could double check.

[altabrig]

Is this the right template for these old pivots?


Cant load the heal template. But spacing is a bit further between the screws than the new or old PIVOT heals. The toes look right. I mounted them without a template, but may re-mount and want the right toe template. Thanks.

[Duffman]

I held it over my warden 11 jig yesterday and it didn't seem to work. The heel track matched, but the toe was different. I was busy with some other stuff so I didn't look into it more, and the guy picked his bindings up before I could double check.

Talked to my buddy he mounted his kids skis with the Warden 11 template. According to him it worked. Again second hand info so use w caution.

[AlpiNord]

[altabrig]

http://www.slidewright.com/Bindings/Look/Pivot_vs%20older%20layout.png[/IMG]




[/QUOTE]

Your 32mm distance between the 10mm and 12mm/19mm and the 8or 10mm/21mm looks correct on the toe for the older pivots. Is the turntable template same as the new pivots? Can't figure out which file that one is. Much appreciated. Love your centering template.

[AlpiNord]

Your 32mm distance between the 10mm and 12mm/19mm and the 8or 10mm/21mm looks correct on the toe for the older pivots. Is the turntable template same as the new pivots? Can't figure out which file that one is. Much appreciated. Love your centering template.

The blue is the current heel. The black is from the axial/pivot (not axial2/pivot) template you could not load

[altabrig]

The blue is the current heel. The black is from the axial/pivot (not axial2/pivot) template you could not load

I assume the violet toe template is what I need to combine with the current heel template which must have not changed as my old heel fore aft bolt span is 32m. Or I can use the one you posted and goes with the closer rear marks, but I am nit sure which file that is. Pivot/Axial 2?

[AlpiNord]

I assume the violet toe template is what I need to combine with the current heel template which must have not changed as my old heel fore aft bolt span is 32m. Or I can use the one you posted and goes with the closer rear marks, but I am nit sure which file that is. Pivot/Axial 2?

Pivot/axial2. I'll look for the template link and post it up. There are some discrepancies between Jons, Knuts & Rossi's templates. The proven Look Pivot Binding Mounting tool is based on the Rossi template:

[Marshal Olson]

Longshot.
Anyone know of a paper template for Marker TCX demo bindings? I looked in all the regular places with no luck.

[AlpiNord]

Longshot.
Anyone know of a paper template for Marker TCX demo bindings? I looked in all the regular places with no luck.

If you strike out, check out this thread. Scan, trace or take images of the bottoms, along with some measurements and I can draw one up.

[AlpiNord]

[img]https
://www.slidewright.com/Bindings/Templates/pivot_template.png[/IMG]

[EricB]

I made a skitrab vario 2 template based on the powderguide templates. I only verified it with 300BSL. It could be way off with other BSLs. Verify it before drilling. Hole patterns as listed on https://skimo.co/tech-binding-hole-patterns

Link: https://ufile.io/6bsyqbem

This link seems to be dead, do you still have the PDF available?


EDIT: Made a free account. Link works now.

[Cocximus]

This link seems to be dead, do you still have the PDF available?

It works from my phone. Let me know if you can't get it to work I can email it.

[skinipenem]

Strive 12&14 match warden 11
Strive 16 matches warden 13
(both toe patterns are the same but the heels are different between the two)

Is this still correct? Warden 11 matches Strive 12 and 14.

Warden 13 matches Strive 16?

I can't seem to find a "Strive" template

Sent from my SM-S908U1 using Tapatalk

[AlpiNord]

Is this still correct? Warden 11 matches Strive 12 and 14.

Warden 13 matches Strive 16?

I can't seem to find a "Strive" template

Sent from my SM-S908U1 using Tapatalk

I'll need to circle back again and clean up a template if it'll work, but this is what I have for Warden demo layouts:



As noted, I'd think Pivot heels ought to clear. You'd need to confirm toes. If there is, you can always plug holes and/or maybe install ss inserts.