Results 1 to 25 of 96
Thread: opinions on bd helios bindings
-
12-11-2019, 11:45 PM #1registered abuser
- Join Date
- Oct 2003
- Location
- tahoe
- Posts
- 3,428
opinions on bd helios bindings
anybody tried em yet long enough to form an opinion?
pros?
cons?
thanx
-
12-12-2019, 03:55 AM #2
They are rebranded ATK's. Enough info on ATK here , use the search. But the summary is: ATK is fucking bomber, way better than dynafit (imho). Simple, light and sturdy. I've been skiing the ATK freeraider 14 2.0 a lot and really value them. Highly recommended.
-
12-12-2019, 11:03 AM #3
This. Literally every BD Helio binding is just a re-branded ATK. The only reason to buy the BD binding is better customer support (US distribution) - they are way more expensive than just buying the ATK directly, though. For your trouble:
BD Helio 200 - ATK Haute Route
BD Helio 180 - ATK Trofeo Plus
BD Helio 145 - ATK Trofeo
I ski the Helio 200 and I believe it is as close as I've come to perfection in a binding. I love it. Independent vertical and lateral release, active forward compensation (like forward pressure), all metal construction, bomber. I also have a pair of ATK Raider 2.0 12's (that my wife currently uses) and those things are similarly excellent.
-
12-12-2019, 12:39 PM #4registered abuser
- Join Date
- Oct 2003
- Location
- tahoe
- Posts
- 3,428
thanx for the replies. yes im aware they are rebranded atk's. was ready to pull the trigger on some but i have concerns about what appears to be a short heel riser (compared to dynafit). ive now broken 4 radical heel pieces. 3 times with the stripped screws top plate and once with the mounting plate under the heel so......... im officially over those things even though i keep getting free warranty replacements. ill try searching atk on here but if you would indulge me .......... how does the heel riser compare to the dynafit??
i have access to bd proform so the cost is actually cheaper then going through a euro purchase. but yeah, retail helios through bd are stupid expensive.
also it seems only the og atk's have a brake option that i dont see on bd's site
thanks++++
-
12-12-2019, 01:14 PM #5registered abuser
- Join Date
- Oct 2003
- Location
- tahoe
- Posts
- 3,428
for the record ive searched here and googled and read wildsnow reviews but it appears to be several companies offering similar atk bindings but they all have different names so its tough to compare.
does the helio 200 have the same great riser as the atk raider12 or does it not go as steep?
and does the helio 200 have a brake option?
thanx for all replies++++
-
12-12-2019, 01:23 PM #6
Look here:
https://www.wildsnow.com/10733/get-u...for-your-ramp/
This will give you comparisons between the ATK Raider's height of climbing risers and the height of other Dynafit models. It looks like ATK is a tiny bit shorter, but not significantly. In my experience the Helio200 is just fine - for 95% of my touring I just use the 'flap over pins' (medium) height riser, but I know that you can rotate it 180 degrees to get a high riser.
-
12-12-2019, 03:06 PM #7
I’ve been out three days on my Helio 200 and totally stoked so far.
Clean, simple design and awesome functionality. Smooth and super easy to use, and they feel great skiing down. My wife and two other friends have the H145 and have been very happy so far as well.
Sent from my iPhone using TGR Forums
-
12-12-2019, 03:57 PM #8
https://skimo.co/binding-riser-heights
Good beta on riser heights. Helio 200 high riser is like a standard Dynafit mid riser.
If you don’t mind the fixed U spring release value, then the Salomon MTN is simple and bomber but has 3 risers and a big BSL adjustment for not too much more weight.
Sent from my iPhone using TGR Forums
-
12-12-2019, 04:30 PM #9
How do you like the BD Helio 200 vs the Raider 2.0? The Raider got excellent downhill reviews from blister, but the is Helio 200 that far off in downhill performance?
edit: basically I'm wondering if I should mount them instead of my G3 Zeds? (zeds are still new in box and can be returned)Last edited by macon; 12-12-2019 at 04:56 PM.
aerospace eng with a gravity fetish
ig
-
12-12-2019, 05:11 PM #10
So, I got a good deal on some Helio 200s and was having second thoughts. I posted a "feeler" FS ad on Gear Swap. They looked so "dainty".
A few days later, I was doing some maintenance on my wife's skis which are mounted with Vertical STs. Looking at how flimsy they appeared, and the fact that I skied them, my confidence in the ATK/BDs robustness was restored. All aerospace grade ("7" series) aluminum. What's not to like?
I won't have time to mount them until this weekend. I just drew a mounting template which needs a test/verification mount. The hole spacing appears to be very close (but not identical) to the spacing on skimo's hole recognition page (https://skimo.co/tech-binding-hole-patterns). I'm getting a .25mm variance on two sets of holes from what they get.
I'll post a link to the template here and on the templates thread once I've tested it.
... ThomGalibier Designcrafting technology in service of music
-
12-12-2019, 05:38 PM #11how flimsy they appeared, and the fact that I skied them, my confidence in the ATK/BDs robustness was restoredWell maybe I'm the faggot America
I'm not a part of a redneck agenda
-
12-12-2019, 05:41 PM #12Registered User
- Join Date
- Oct 2010
- Posts
- 1,961
ATK posts mounting templates with good instructions on their website. Another reason I like them.
-
12-12-2019, 05:45 PM #13
So the only thing that makes a difference between the Raiders and the Helio200 is that I have the ATK Freeride Spacer on the Raiders and that actually makes a huge difference. I could mount the freeride spacer on my Helio200's, but I'd have to put it directly on the ski (the atk raider has a mounting plate which takes it directly).
Seriously, the Freeride Spacer is a bit of a gamechanger.
-
12-12-2019, 05:56 PM #14Registered User
- Join Date
- Jan 2014
- Posts
- 880
Ive got haute route 2.0s. The toes are super confidence inspiring conpared to dynafit. Cant quite explain it but they feel "solid." Independent lateral vertical heel unit is very slick too. No complaints, and the stock ramp aint bad to boot. Got a good deal on helio 180s and gonna mount them on a spring ski this weekend.
-
12-12-2019, 05:56 PM #15aerospace eng with a gravity fetish
ig
-
12-12-2019, 06:00 PM #16
Hey thom, BD has a template on the website for the 200.
Sent from my iPhone using TGR ForumsGravity always wins...
-
12-12-2019, 06:34 PM #17
I’ve wondered about that spacer, really that good, eh?
Sent from my iPhone using TGR ForumsGravity always wins...
-
12-12-2019, 07:31 PM #18
-
12-12-2019, 07:59 PM #19registered abuser
- Join Date
- Oct 2003
- Location
- tahoe
- Posts
- 3,428
id imagine the reason for so many dyna radical heel piece failures is the lack of something like the freeride spacer. with the spacer, your weight is on the spacer and not just floating in the air on 2 pins, putting all the torque on the pins which cause the top heelpiece plate screws to strip out. the fact that the raider brakes are on the front allows a spot for the spacer to be mounted. if you have brakes on radicals there is no place to mount something similar to the freeride spacer and the dyna brakes have enough play where your weight is still mostly on the pins
ive also read that the spacer isnt really neccesary on skis 95mm waisted and under but is helpful when trying to drive larger pow skis to alleviate stress on the pins in lightweight bindings
-
12-12-2019, 08:03 PM #20registered abuser
- Join Date
- Oct 2003
- Location
- tahoe
- Posts
- 3,428
thanx for that link doc+++
thats exactly what i was looking for
just wish it had the atk raider on it..........or is the hagan core the same riser?
-
12-12-2019, 08:12 PM #21
-
12-12-2019, 09:03 PM #22
-
12-12-2019, 09:32 PM #23
Wait, weren't the Radical heel failures in walk mode in the vast majority of case? The main issue was with unsupported risers which put a ton of pressure on the top plate and eventually ripped the back screws off. I've never heard of a Rad failure in ski mode, that would involve driving the pin assembly down through the body of the binding which as the pins are supported... I've never heard of that happening but I'm not exactly a staffer in the dynafit warranty department.
Guess I'm not techy enough top appreciate the subtle differences in power transmission and ski feedback when switching between light weight pin bindings, regular pin bindings, and beef tech bindings.
-
12-13-2019, 12:16 AM #24
Fwiw, I found the power transmission advantage of bindings like the Kingpin all but disappear in powder. The benefit was more on firm snow.
I can see how a freeride spacer might behave a bit like a Kingpin in this respect. Haven't tried it though.
-
12-13-2019, 12:31 AM #25Registered User
- Join Date
- Nov 2011
- Posts
- 68
sled drift.
anybody played with new R14's freeride spacers?
are both of them slide both way? or outside only?
Sent from my iPhone using TGR Forums
Bookmarks