Results 201 to 225 of 1198
-
03-14-2020, 11:10 AM #201Registered User
- Join Date
- Nov 2016
- Posts
- 1,409
I know this is the wrong thread but didn't want to create a new thread just for this and couldn't find it in the search function. Do I have this correct?
Pivot 12/14 - more plastic. Same binding besides the din
Pivot 15/18 - metal. Same binding besides the din. 15 isn't currently being made but there's talk about them being made again
Rossi fks is same as pivot but aren't made anymore
Sent from my Pixel 2 using Tapatalk
-
03-14-2020, 11:12 AM #202King potato
- Join Date
- Feb 2011
- Location
- BC
- Posts
- 1,949
12/14 have a plastic toe, heel is the same except for DIN difference.
Yea except the 15 is currently available from some dealers and will be fully available next year.
Yes
-
04-28-2020, 10:13 PM #203
have old fks 155, need some 95mm brakes (or arms), looking for a reasonable solution. Trade/buy your <100? buy/trade arms only? I have had success bending arms before but only with Salomon. These are old and I don't want to break them. If you are confident you can bend them I could send you $ or something. TIA
-
05-26-2020, 07:58 PM #204
Needing some 115 pivot brakes, anyone have some for sale or would like to swap for 130’s?
Sent from my iPhone using TGR Forums
-
05-29-2020, 10:00 AM #205Registered User
- Join Date
- Mar 2020
- Posts
- 209
-
05-31-2020, 10:12 PM #206
Anyone got a metal half-moon they can throw in the mail? After years of helping out everyone I know with spare parts, I'm running out of spare parts.
-
05-31-2020, 11:24 PM #207King potato
- Join Date
- Feb 2011
- Location
- BC
- Posts
- 1,949
I’m in Canada and can help you out no problem if no one else steps up
-
06-01-2020, 01:08 PM #208
-
06-01-2020, 01:46 PM #209
I have lifter plates for $10 shipping if anyone wants them
Sent from my iPhone using TGR ForumsI need to go to Utah.
Utah?
Yeah, Utah. It's wedged in between Wyoming and Nevada. You've seen pictures of it, right?
So after 15 years we finally made it to Utah.....
Thanks BCSAR and POWMOW Ski Patrol for rescues
8, 17, 13, 18, 16, 18, 20, 19, 16, 24, 32, 35
2021/2022 (13/15)
-
06-01-2020, 08:09 PM #210
-
06-02-2020, 01:22 PM #211
USPS is on its way.
You now owe me some advice on where to mount my 191 Elan FIS GS Ripsticks.
-
06-02-2020, 10:12 PM #212
I feel like being slightly ahead is not going to be the worst thing on that ski, but I wouldn't bother to stray too far off the line. The problem I had with the 35m GS skis was that the tail was so stiff, it was very difficult to drive across the fall line. Like the last 1/4 of the turn they just wanted to go straight, and I never got proficient enough at stivoting to make it happen up front. It was a lot like jumping back on a 215 straight ski, I kept donkey kicking out because I couldn't get enough weight on the front of the downhill ski at the top of the turn to get it to engage and get the direction I needed. Making the tail shorter would seem likely to compound that, because you've got that much more to get locked in up front. Granted, I skied them about eight runs before I collapsed in agony, but on actual hardpack (bulletproof) they were really solid, but on softer groomers they were... a handful.
Back when FIS legal was >21m, I couldn't get enough of race stock GS skis. I was running Atomic and then Stockli, which were both on the soft side of the WC stuff, and they just crushed it for me. But the >27m skis were a little too much work to ski cleanly in a beer league race, and the >35m's were just exhausting. I think the biggest thing for me was that they were so stiff and straight that you really had to be at 100% at every part of every turn, and I just got cooked halfway down the run. Felt like I couldn't get the middle of the ski to hook up once I got tired, and I know it's because I wasn't flexing the ski enough to get the sidecut engaged, which is not typically my issue.
Jesus, I'm blathering about race skis in the middle of the night. It's going to be a long summer. Just mount em up and go scare yourself.
-
08-03-2020, 10:12 AM #213
Looking for a set of heels for a Cast second ski setup. 14/15/18 all fine, gray would be ideal aesthetically but I'm not too picky. 115 brakes please. Whatcha got?
Would also buy a full set of 15s or 18s for the right price but I don't strictly need the toes.
-
08-04-2020, 10:36 PM #214
Looking for at least one, preferably two, half moon/crescent piece for the heel as one has broken on a pivot 14 we own. Anyone got any?
Sent from my iPhone using TGR Forums"...if you're not doing a double flip cork something, skiing spines in Haines, or doing double flip cork somethings off spines in Haines, you're pretty much just gaping."
-
08-09-2020, 07:21 PM #215
looking for 115 brakes or possibly 14/15 heels with 115 brakes.
-
08-10-2020, 01:54 PM #216
Anyone have a source for P18 (newer) GW AFD baseplates? Need a pair to get boot consistency on my Katana’s. Tia- /dan
-
08-15-2020, 09:23 AM #217
-
08-15-2020, 02:20 PM #218
-
09-02-2020, 02:46 PM #219
Anyone have 115 brakes? I have p18s with 95s, but I need 115s
Da Hood Crew, bruddah!
-
09-02-2020, 03:20 PM #220
Looking for an orange 14din heel piece, no brake unit required
Sent from my SM-G960U using TGR Forums mobile app
-
09-10-2020, 02:53 PM #221
-
09-11-2020, 05:05 PM #222
Question, I got two pairs of Look Pivot 12's from 2016, does anyone know the part number to upgrade to grip walk AFD?
90% of skiing is just looking cool
-
09-13-2020, 09:21 PM #223
Anyone have a pair of PX15 heels, or know if the pivots are the same mount pattern?
-
09-13-2020, 09:57 PM #224
PX and Pivots don’t share a heel pattern, unfortunately. See here: https://www.tetongravity.com/forums/...aper-Templates
Sent from my iPhone using TGR Forums
-
09-17-2020, 04:04 PM #225
hmm, does anyone have heels that would fit the px pattern?
Bookmarks