Results 676 to 700 of 2310
Thread: Official ATK Binding Thread
-
01-09-2021, 05:02 PM #676
Tried to search, no luck. Anyone know if atk raider holes are the same as solly mtn holes??
Perfer et obdura, hic dolor olim utior tibi. -Ovid
-
01-09-2021, 05:27 PM #677
There are so many variations of Raiders, when you take into account the back and forth renaming of the front brake version vs. the rear brake version, that it's difficult to be specific.
What I can tell you is that I just went through the downloadable PDFs on the ATK site, and I established that my Raider 12s (this year's binding, rear brake) have the following spacing:
- Toe: 45mm w x 44m long (front to back)
- Heel: 45mm w x 60mm long
I have not done a test mount with this, so treat these as nominal dimensions (i.e. +/- a few tenths of a mm).
Note (see post upstream in this thread) that next year's Raiders will have a narrower mount pattern due to some patent issues with the wide footprint (go figure ... eh?)
... ThomGalibier Designcrafting technology in service of music
-
01-09-2021, 05:50 PM #678
Ah...I see. Thanks for info, trying to find out if I could reuse a set of holes on a ski. I guess paper template match up would the way to go.
Thanks again!Perfer et obdura, hic dolor olim utior tibi. -Ovid
-
01-09-2021, 07:09 PM #679Registered User
- Join Date
- Nov 2013
- Posts
- 1,109
-
01-09-2021, 08:29 PM #680Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
-
01-09-2021, 08:45 PM #681
Toe pin popped out (a la Kingpin).
But wait! I just realized it's a Salomon toe. WTF is he posting this here for???
... ThomGalibier Designcrafting technology in service of music
-
01-09-2021, 08:48 PM #682Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
-
01-10-2021, 01:50 PM #683Registered User
- Join Date
- Nov 2020
- Location
- Edmonton
- Posts
- 14
Best source for spare U-springs in North America? Looking to stiffen up a pair of Trofeo/Helio 145.
-
01-10-2021, 06:19 PM #684Galibier Designcrafting technology in service of music
-
01-10-2021, 07:11 PM #685Registered User
- Join Date
- Jan 2010
- Posts
- 94
Any A-B comparisons between the atk FR 14 (w/freeride spacer) and Fristchi Vipec in terms of pure downhill ability?
Thinking of ripping my vipecs off my DWTs and replacing with FR14.
-
01-10-2021, 08:10 PM #686Gel-powered Tech bindings
- Join Date
- Dec 2004
- Location
- Amherst, Mass.
- Posts
- 4,686
Mo' skimo here: NE Rando Race Series
-
01-10-2021, 08:39 PM #687Registered User
- Join Date
- Nov 2013
- Posts
- 1,109
You're going to loose elasticity in the binding going to fr14, maybe a touch more control over the tails due to the freeride spacer but at the cost of more vibrations. If you want something that skis better you don't have to redrill you could use a Tecton. They're only 50 g heavier than a vipec
TLDR; Ski faster. Quit breathing. Don't crash.
-
01-11-2021, 12:03 AM #688
Anybody know the difference between the old M05 and the new M06 jig?
What bindings in the Raider / RT-line does the M05 cover, or are they the same?
-
01-11-2021, 07:13 AM #689
-
01-11-2021, 07:28 AM #690
-
01-11-2021, 12:29 PM #691Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
-
01-11-2021, 12:31 PM #692
-
01-12-2021, 02:09 AM #693Registered User
- Join Date
- Mar 2011
- Location
- Russia, Saint-Petersburg
- Posts
- 41
Never tryed Fritchi, but you could easily find A-B comparison between Kingpin and Vipec/Tecton on Blister.
I went to FR14 directly from Kingpin, and in my opinion the power transfer of FR14 is near the same, maybe a bit better. I have Kingpins on Armada Kufo 108 and ATK FR14 on Kastle FX106 HP, and I really could go faster and push skis harder on Kastle with ATK then on Armada with Kingpins. Also, Kastle is stiffer and heavier than Armada (maybe it's a reason to ski faster), but I never had any issues with control in any hard conditions.
-
01-13-2021, 09:04 PM #694Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
Official ATK Binding Thread
Probably have a pair of al06 risers available. Free plus passing on a favor. Too tall for my boot and not interested/have the time for modding. PM me.
Edit. It actually fits under my wife’s boot so I’ll keep it for now.Last edited by CaliBrit; 01-14-2021 at 02:25 PM.
-
01-14-2021, 08:05 AM #695Registered User
- Join Date
- Dec 2010
- Location
- whitefish
- Posts
- 1,242
-
01-14-2021, 10:17 AM #696
-
01-15-2021, 11:39 AM #697
Official ATK Binding Thread
Holy observation.
I noticed the bottom outer toe screws(4 total) for the atk fr 14 2.0 don’t sit like the others. Easily explained with pictures. It was my first time mounting bindings so I could have messed up all 4 bottom outer toe screws who knows.
Seems like an odd design choice from ATK. Anyone else notice this?
My life is better than your dreams
-
01-15-2021, 05:21 PM #698Registered User
- Join Date
- Jan 2014
- Posts
- 879
-
01-15-2021, 06:18 PM #699Registered User
- Join Date
- Jul 2005
- Posts
- 3,230
-
01-15-2021, 06:38 PM #700Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
Bookmarks