Selling some stuff to be better prepared for the winter.
All prices are OBO, shipping available and is negotiable.
Located in SLC area for local pickup.

1. BERD/Onyx Vesper/ Roval Control 240 Wheelset. Boost spacing, XDR driver (have spacer to run regular XD cassette), 6 bolt, regular and torque caps included. Wheelset is around 1560g. Rims are 29mm wide. Very few marks from rocks. Hubs have upgraded hybrid ceramic bearings and run smooth and true.

Asking $1500.

2. 2024 Propain Hugene 2 XL Frame. Comes with the stock Fox Float X shock (210x50), rear axle and headset. Amazing trail frame with great geometry if you're 6' or taller. Fully wrapped from day one, some film is peeling off.

Asking $1500

3. 2023 Manitou Mezzer Pro 29, 44mm offset, currently sits at 160mm of travel but can be adjusted between 130 and 180. 7.5" of steerer tube with the starnut installed. Will also come with the brand new bolt on fender and travel adjust spacers. Has maybe 20 hours of riding time, just changed the lower leg oil so it's smooth. Clean stanchions with very few marks on the lowers.

Asking $500

4. 2024 Manitou Mara Pro Piggyback. 210x55 eyelet. The shock was only 5 hours from new when I parted out the frame, only removed the air can to lube it. This is the newest version with an equalizing port that the previous version was lacking.

Asking $500

5. 2024 Cane Creek Tigon 210x52.5. Very little time on it, probably 10 hours. Can be restroked to 50 or 55mm without bleeding.
Have 500lbs linear CC VALT spring.
Perfect fit for bikes with yoke like Stumpjumper Evo or Ripmo V2

Asking $500 for the shock, $50 for the spring


6. Race Face Turbine R 35 Handlebars/ Atlas Stem.
Clamp diameter 35mm
Rise 35mm
Cut to 760mm

Atlas stem
35mm clamp
50mm reach

Asking $100 for both

Sent from my Pixel 7 Pro using Tapatalk