LOOK HM12 aka dynafit radical ft brake wonky

[jhyatt]

The bottom ski in these pics the brakes stay down but the pad sort of sticks up so every step on the uphill it kind of smooshes and the brake arms come in a little.
The little wire I circled in blue is the only difference I see between the two bindings. It looks a little bent?
Any suggestions from dynafit tech nerds?
Try to bend it back?
I have just been living with it but it's annoying and I worry it will just break? Or it's fine?
Thanks.
I don't know the names of all the little pieces.

[SoVT Joey]

I would pull the heel off and see if the spring is out of its seat under the heel piece. And I would GENTLY try to straighten that spring arm back out. A pair of needle nose pliers should twist it back straight but start with pulling the heel and see if something is wrong with the how the spring is seated.

[jhyatt]

I would pull the heel off and see if the spring is out of its seat under the heel piece. And I would GENTLY try to straighten that spring arm back out. A pair of needle nose pliers should twist it back straight but start with pulling the heel and see if something is wrong with the how the spring is seated.

Ok thanks