Binding Jigs (Dynafit, Hammerhead/22D, Salomon)

[skibumnh]

$150 each, buyer pays shipping (will calculate based on location)

SOLD: Hammerhead / 22 Designs

Dynafit


Salomon (fits up to 115/120mm with bumpers removed)

[JDubyu]

PM’d on the Dynafit jig.

[SkiLyft]

Pm about the Sally jig


Sent from my iPhone using TGR Forums

[FortySixMac]

Second on the solly jig.


Sent from my iPhone using TGR Forums

[SkiLyft]

It’s yours FortuSixMac — pretty much a pivot household and no sense taking a jig I won’t use much!


Sent from my iPhone using TGR Forums

[TeleTerrapin]

I've got seven (and more to come!) skis to mount / remount with binding freedom inserts for AXL/OutlawX bindings. I was fretting using the see-through mounting templates. Measure thrice, drill once I guess.

In short, I desperately need the hammerhead/AXL binding jig. I will put it to great use!

Sent you a PM.

[Doremite]

I've got seven (and more to come!) skis to mount / remount with binding freedom inserts for AXL/OutlawX bindings. I was fretting using the see-through mounting templates. Measure thrice, drill once I guess.

In short, I desperately need the hammerhead/AXL binding jig. I will put it to great use!

Sent you a PM.

Placement of Outlaw X / AXL relative to boot center varies by 8mm per 22 Designs so just keep that in mind when deciding where to drill.

[ALFONSO618]

What hole configuration is the solly? Sth? Sth2? Warden?

I’ll get in line if that’s what it’s for


Sent from my iPhone using TGR Forums

[Djongo Unchained]

That Salomon jig is for older clamps. The last one it will fit is the first gen STH; not STH2 or Warden.
STH1, Drivers, Equipes - good to go.
$150+ is too rich for my blood but they are becoming harder to find for us pure OG solly guys.

5 post jongs to the back of the line...

[skibumnh]

Second on the solly jig.


Sent from my iPhone using TGR Forums

PM me with details for shipping and it’s yours


Sent from my iPhone using TGR Forums

[FortySixMac]

PM me with details for shipping and it’s yours


Sent from my iPhone using TGR Forums

Didn’t realize it was only for 1st gen. Passing to next mag in line.


Sent from my iPhone using TGR Forums

[TeleTerrapin]

Placement of Outlaw X / AXL relative to boot center varies by 8mm per 22 Designs so just keep that in mind when deciding where to drill.

Taking a look at the printable paper 22designs jig compared to the pictured 22 designs jig, it looks like there's a cut out for the AXL and hammerhead/bombshell mount. The line for the hammerhead/bombshell appears to line up very closely with where the OutlawX pin line is placed on the paper jig.

If anything, I'm thinking I may add demarcations for my boot length from boot line center for manufacturer recommendation line mounting.

Sent from my SM-N986U using Tapatalk

[jhyatt]

If I had that 22d jig I would put threaded inserts in and do a pair in front and behind to try location.
But I don't have it

If anyone in New England has one to lend please let me know

Sent from my SM-G781U1 using Tapatalk

[stec06]

Taking a look at the printable paper 22designs jig compared to the pictured 22 designs jig, it looks like there's a cut out for the AXL and hammerhead/bombshell mount. The line for the hammerhead/bombshell appears to line up very closely with where the OutlawX pin line is placed on the paper jig.

If anything, I'm thinking I may add demarcations for my boot length from boot line center for manufacturer recommendation line mounting.

Sent from my SM-N986U using Tapatalk

I have an old school jig from Rainey designs and that's exactly what I did... just took a sharpie and marked boot center for Scarpa 27 and Garmont 26.5 shell sizes. Works like a charm. I can mount up Axls and Vices in minutes.

[TeleTerrapin]

PM'd with address for logistics.

Sent from my SM-N986U using Tapatalk

[skibumnh]

Bump. 22D sold to TeleTerrapin. Solly and Dyna jigs still up for grabs.


Sent from my iPhone using TGR Forums