Check Out Our Shop
Results 1 to 9 of 9

Thread: Cleaning leaked battery (TurboFans)

  1. #1
    Join Date
    Feb 2017
    Posts
    28

    Cleaning leaked battery (TurboFans)

    I wear glasses, and finally settled on the Smith turbofans a few years ago (I had to cease contacts a few years ago and yeah I know I know I should get the surgery, but i haven’t and won‘t).
    Anyway, I purchased a second set after smith stopped making the Fans and put them on the shelf. Unfortunately they came with batteries installed, and one leaked a little. Just a little, but enough that they don’t work. Any tips for cleaning the battery compartment and hopefully getting them operational again? Q tips and vinegar?

  2. #2
    Join Date
    Sep 2010
    Location
    In your Dreams
    Posts
    2,613
    Answered your own question. Or use a tooth brush
    Seeker of Truth. Dispenser of Wisdom. Protector of the Weak. Avenger of Evil.

  3. #3
    Join Date
    Feb 2004
    Location
    driven way past the Stop and Shop
    Posts
    3,073
    I use the same goggles with prescription inserts. Last pair were a bitch to locate. Mine only take a single aaa battery. I think vinegar is probably your best shot and you’re probably not going to get anything bigger than a qtip in there. Maybe a pipe cleaner if they still sell such things. Good luck,
    Damn, we're in a tight spot!

  4. #4
    Join Date
    Sep 2011
    Location
    Vermont
    Posts
    1,606
    I’ve had luck cleaning battery terminals with a slurry of water and baking soda.

  5. #5
    Join Date
    Sep 2015
    Posts
    1,287
    I assume these are alkaline batteries?
    If so the solution/corrosion is a "base." So to neutralize, you need an acid.
    A quick google search shows reliable sources recommending lemon juice or vinegar, and a Q-tip or tooth-brush. (Which is what I've used over the years.)

    IME, it's often useful to use bits of sandpaper or a wire brush. (In a Dremel at low speed?)

  6. #6
    Join Date
    Sep 2004
    Location
    LV-426
    Posts
    21,582
    I have a set of nearly new turbo fans, with a ruined battery compartment due to leakage. Anyone need these? (if you have a clean battery holder but scratched up goggles, or broken fan, or worn out foam...)
    Quote Originally Posted by powder11 View Post
    if you have to resort to taking advice from the nitwits on this forum, then you're doomed.

  7. #7
    Join Date
    Feb 2009
    Posts
    586
    Problem with corrosion on the contacts is that even after you have removed it the metal is pitted, any plating is damaged, and they will probably corrode again.

  8. #8
    Join Date
    Feb 2017
    Posts
    28
    Thanks for the replies. I think it was a duracell in there, so alkaline.

  9. #9
    Join Date
    Feb 2006
    Location
    Among Greatness All Around
    Posts
    6,800
    All depends on how bad it is. The mild white powder that collects and all but has not pitted or discolored the contacts then the baking soda or vinegar is worth trying. If the contacts are really bad a file or dremel and or sand paper to get it back down to the metal. Then if the battery still does not work right, then sometimes you can break out the soldering iron and recoat the contacts with some solder and let it flow a bit past the corrosion to the usually some sort of coated metal...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •