Results 26 to 36 of 36
Thread: Educate me on bases
-
03-08-2023, 12:30 PM #26Registered User
- Join Date
- Nov 2016
- Posts
- 416
-
03-27-2023, 04:22 PM #27Registered User
- Join Date
- Mar 2022
- Posts
- 835
My Dynastar M-Free 118 bases felt fast AF this weekend at Bridger. Maybe it is because they are red?
I wouldn't expect it from a colored base with big lettering, but I was absolutely blowing past people on Pierre's Return. I don't think a single person passed me all weekend and I almost never skated.
Wax was just Toko universal that had 1-2 days on it before the trip, so by sunday afternoon we're talking 3-4 days and they were still zooming. Base has a limited fine texture--I'm assuming it is the stock bottom but I bought them used (in pristine shape) so it is possible the original owner had them ground.
-
03-29-2023, 10:41 AM #28Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
03-29-2023, 11:55 AM #29
-
03-30-2023, 08:32 AM #30
And turns, even in powder. Proper structure (machine or hand) coupled with waxing cycles is where the rubber meets the road. After all the money people spend to go skiing, it amazes me people don’t spend a little more time and focus trying to dial this in better.
When I started really analyzing different waxes and hand structuring (planer and sand paper), I used a pair of skis for testing. After a season or two of trying different structures, waxes and some additives on various snows and temps, I ended up with super slick skis. These ‘well seasoned’ skis were dangerous just standing on them without moving.
Sent from my iPad using TGR ForumsBest regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
03-30-2023, 08:35 AM #31
And turns, even in powder. Proper structure (machine or hand) coupled with waxing cycles is where the rubber meets the road. After all the money people spend to go skiing, it amazes me people don’t spend a little more time and focus trying to dial this in better.
When I started really analyzing different waxes and hand structuring (planer and sand paper), I used a pair of skis for testing. After a season or two of trying different structures, waxes and some additives on various snows and temps, I ended up with super slick skis. These ‘well seasoned’ skis were dangerous just standing on them without moving.
Sent from my iPad using TGR ForumsBest regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
03-30-2023, 11:55 AM #32Registered User
- Join Date
- Nov 2011
- Posts
- 443
I have internalized some long ago read statement that oxidized or "base burned" ptex will no longer take up wax until refreshed with a grind. Any truth to this?
-
03-30-2023, 12:29 PM #33
Educate me on bases
Last edited by Alpinord; 03-31-2023 at 04:17 AM.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
03-30-2023, 12:51 PM #34
-
03-30-2023, 01:05 PM #35
Educate me on bases
Good point. More accurately, depends on how bad the burn. A touch up may be all you need. A good brushing might help. A grind or hand structuring if it’s real bad.
FWIW, Silicon carbide sand paper cuts plastic cleaner than aluminum oxide. It’s a good time to make repairs prior.
More aggressive structuring for spring reduces suction considerably. As a cheat, rather than reducing aggressive structure during wide temp swings, you might try ‘filling in’ the structure with a hard green and not brush it all out after scraping.
Edit: add’l info
Sent via iPhone
Slidewright.comLast edited by Alpinord; 03-31-2023 at 04:20 AM.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
03-30-2023, 06:44 PM #36
I can't really feel the difference between extruded and sintered bases on skis, but on Snowskate, GODDAM does it make a difference
Sent from my SM-G988U using Tapatalk
Bookmarks