" In the photo above you can see the screw is flush with the black binding housing while the boot is clicked in, indicating that the foward pressure is set properly. If it's too loose, meaning the heel piece is too far back that screw will be sticking out as seen in the image below indicating that the forward pressure is too low. "
pretty much all ski bindings do something along these lines ^^ with the screw flush with the binding frame or line up with some hash marks or somefucking thing
not sure about the Kingpin but you will probably die anyway when the blow up in normal use
Last edited by XXX-er; 02-23-2023 at 03:15 PM.
Lee Lau - xxx-er is the laziest Asian canuck I know
Bookmarks