FS: K2 Wayback 106, 186cm

[Tjaardbreeuwer]

Sold



Wayback 106, 186cm.




In perfect shape, just had them stone ground, no scratches or anything on the bases or edges.
Small scratches/nicks along edge of topsheet, I included a picture of the worst, others are less deep.
The black you can see through the clear parts of the topsheet, on the light brown parts, is part of the ski’s core construction, not a stain or so in the outside.
Only a couple of days of use, and only one mount.

[rfconroy]

What were these mounted for, and what BSL?

[Tjaardbreeuwer]

@rfconroy,

They were mounted for ATK Crest, for ~308 mm BSL.
(I had Cochise’s, with a 315mm BSL when I bought the skis, but was planning on getting dedicated AT boots, so I had the shop mount them with the heel piece adjusted towards its longer side, so that I could use a shorter boot when I got it.
So, about 308mm would have been right in the middle of that adjustment, with about 10mm in each direction. In other words, if you mounted the same bindings, they would fit for boots from 298-318mm, but to be safe I’d say: 300-318mm.)

You probably know this list, but just in case you don’t, here is a great list to compare hole patterns, to see if you can reuse (some of) them.
https://skimo.co/tech-binding-hole-patterns