Results 26 to 50 of 139
-
11-13-2022, 05:24 PM #26
This is amazing. Any chance of having one for Solly Wardens or warden demos? Picked up a bunch over the past years and have like 3 pairs to mount
-
11-13-2022, 05:51 PM #27
I'm already overextended and think for now, the centering tool should remain simple. I've looked at tons of other ideas, but they all get complicated and harder to produce...Also, it'd be hard to be assured the centering tool was exactly square to make sure the drill holes would be aligned correctly. That's one of the reasons for developing this layout tool. Simple and straight forward.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-13-2022, 05:54 PM #28
I've got three others I have to develop this week and will be in the mode sometime this week. Go ahead and order the tool and leaver a note regarding the Wardens and any help on a verified template from which to base the tool.
EDIT: Warden or Warden 11? Apparently, the Warden is an extension (two holes further out in the toe) of the STH2.Last edited by Alpinord; 11-14-2022 at 01:37 PM.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-14-2022, 12:09 PM #29
Before I hit print, does anything look off to you? The Tyrolia Heel is maxing out the printer's plater. I may have to shorten the length to 360 or 340 BSL if I get crashes.
Also, can you or anyone provide a definitive list of which Tyrolias this Layout Tool would work?
Last edited by Alpinord; 11-17-2022 at 11:42 AM.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-14-2022, 02:56 PM #30
Yes, looks right to me. For my purposes, doesn't need to extend out past 335 (I have one bigfoot friend).
All of Tyrolia's Alpine bindings are designed around the same hole pattern, so this works for everything but the Adrenalin and Ambition frame bindings.
Thanks again T!
-
11-14-2022, 08:05 PM #31
Thanks for clarifying. Got these into the mail today. Let me know how it goes.
Sent from my iPad using TGR ForumsBest regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-15-2022, 06:25 AM #32
^ Yep, got the shipping notice. I have a pair of Attack MNs that are going on a pair of M-Pro 99s that I'm getting from Ptex1 so I'll be trying it out as soon as the skis get here.
Thanks again!
-
11-15-2022, 04:27 PM #33Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-15-2022, 05:07 PM #34
-
11-15-2022, 05:30 PM #35Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-15-2022, 05:42 PM #36
Warden 13 is exactly the same as STH2 except the 2 forward holes for the toe are 35mm further forward.
The Warden 11 uses a different jig.
Also, as of this year, there is no more STH2 WTR - only the STH2 16 is offered for '22-'23, and it is now MN (mount pattern didn't change, only the AFD).
-
11-15-2022, 05:56 PM #37
Thanks. I was waiting to be able to look more into the Wardens before combining (or not) the Layout Tool.
EDIT: My current lean is to combine the Wardens and keep the TH2s separate.
Are the older STH2s able to have their AFDs swapped out to MN like Look Pivots are for GripWalk?Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-15-2022, 06:15 PM #38
Not sure. I stocked up on STH2 WTR 16's and haven't had to deal with it - plus I have no desire to ski any of the skis with STH2's in my touring boots.
(My guess is they are, but you have to swap out the entire base plate for the MN one with more AFD adjustment and maybe use longer screws).
-
11-16-2022, 02:52 PM #39
Ordered both the wood centering tool and the pivot template thing. Looks great!
Sent fra min LE2123 via Tapatalk
-
11-16-2022, 05:28 PM #40
It's in the mail.
In hindsight, I probably should label the heels for STH2, Wardens & Warden 13s.
I'm vacillating between three different combos for the Wardens in combination with the STH2s. Simply making individual heel & toes might be more idiot proof vs trying to combine multiple hole layouts in one tool.
Toes:
- STH2
- Warden, Warden 11 & 13
Heels:
- STH2, Warden & Warden 13
- Warden 11
Any thoughts?
Also, I have a request for the Warden 11 Demo. Do they match the Warden 11 hole & BSC layout?Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-16-2022, 07:56 PM #41
-
11-16-2022, 09:13 PM #42
As far as I know, there is no "Warden" - only Warden 13, Warden 11, and demo versions of both.
Warden 13 and Warden 13 Demo use different jigs (I only have the former), while Warden 11 and Warden 11 Demo use the same jig. These are probably questions best answered by Jon Coster/Spyderjon.
-
11-17-2022, 12:11 AM #43Registered User
- Join Date
- Jul 2019
- Posts
- 72
In for an STH2, just put my order in with a note. Super stoked on this!
-
11-17-2022, 08:18 AM #44Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-17-2022, 08:19 AM #45Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-17-2022, 09:47 AM #46
-
11-17-2022, 11:22 AM #47
I almost threw in the towel when I read that! My head is spinning and I'm losing my mind so bad I ordered another 3d Printer.
So...this is what I have teed up for the STH2/Warden group & I guess Armada line up. I'll need help correlating the Armadas to these.
So far, I have a template for the Warden 11 Demo, but need some help there, too. Shorty J? It looks like the heel layout matches the Warden 11, but not the toes. I'm uncertain on the BSL basis for this template.
Best regards, Terry
(Direct Contact is best vs PMs)
SlideWright.com
Ski, Snowboard & Tools, Wax and Wares
Repair, Waxing, Tuning, Mounting Tips & more
Add TGR handle to notes & paste 5% TGR Discount code during checkout: 1121TGR
-
11-17-2022, 06:23 PM #48
-
11-19-2022, 02:04 AM #49
It's worth mentioning that several others have reported otherwise, which is why I have not changed the template. I myself and people that I personally know have mounted Vipecs with my template. I cannot verify where the discrepancy originates from. As always, when mounting any binding with templates from the internet: please proceed with caution - or with confidence and live with the consequences
-
11-19-2022, 07:18 AM #50
Bookmarks