Results 1 to 17 of 17
-
07-21-2021, 12:52 PM #1
WTB: Front/Left Shimano 4-piston Brake Lever
A client on our last trip crashed and managed to snap off the left/front brake lever on a set of SLX 4-piston brakes, so I'm on the hunt for a replacement. Just need the lever, and I'm assuming any Shimano 4-piston lever should work.
Anyone have one laying around?
-
07-21-2021, 01:36 PM #2
I think that ANY shimano lever will work (and some techtros) from what I have seen ALL shimano levers push the same amount of fluid. so any can work
I might have one, but odds are I have one, but shipping from banff is NOT fast/cheap
-
07-21-2021, 02:35 PM #3
9100 lever wont work. (we are just talking about the "blade only" right?)
But 9120, 8100, 7100, 6100 will all work.
I was in the broken/warranty parts bin today looking a piece for a 7100 brake lever, with no luck.
Sorry to thread jack, but I need 2 bar clamps from a 9100, 8100, 7100 or 6100 brake lever.
Smmokan if you get a full replacement, or a parts donor lever, I'd buy the clamp (removable if you punch the pin out) from you.
-
07-21-2021, 02:41 PM #4
I think it was bikeinn that had singles in stock. Not sure thatd take to get here though
Sent from my SM-G950W using TGR Forums mobile app
-
07-21-2021, 02:50 PM #5
Dee Hubs is correct, there are compatibility issues between XT and XTR and between the x100 and x120 blades (a 8100 blade won't go in a 8120 lever).
If you can find the right blade it won't matter if it's left or right, the only difference is the little metal spring behind the blade.
All blades are super hard to find right now, I snapped one and used my backup last month and am worried about another mechanical."Your wife being mad is temporary, but pow turns do not get unmade" - mallwalker the wise
-
07-21-2021, 03:05 PM #6
I need the full lever assembly; when the actual blade snapped off, it bent the metal clamp mechanism and it's not repairable unfortunately.
-
07-21-2021, 03:15 PM #7
-
07-21-2021, 04:09 PM #8
Yeah, the part you point at was bent/spread out from the impact, and all of the "internal" stuff in the lever was pulled out as well. All we had left was the lever blade and the part attached to the handlebar.
-
07-22-2021, 12:49 PM #9
Ended up getting a left/front Saint lever assembly off eBay for $90, not too bad.
-
07-22-2021, 02:54 PM #10
-
07-22-2021, 03:02 PM #11
Threadjack, I have a brand new, in the box XTR 9100 left lever assembly for $99.00. Just paid $120, ordered the wrong one.
Carry on.Forum Cross Pollinator, gratuitously strident
-
07-22-2021, 03:07 PM #12
-
07-22-2021, 03:16 PM #13
I have one from XT 8120 that leaks out of the end and not repairable but otherwise in perfect condition. Theoretically all of the parts would be useable.
-
07-31-2021, 12:06 PM #14
-
07-31-2021, 04:00 PM #15
-
08-06-2021, 01:04 PM #16
-
08-06-2021, 06:18 PM #17
WTB: Front/Left Shimano 4-piston Brake Lever
Yes, I still would like this brake from you.
And the clamp from smokam
I just cleaned out my inbox.Last edited by Dee Hubbs; 08-06-2021 at 07:34 PM.
Bookmarks