Alright folks, my 3D printers have some bandwidth these days, and I figured now is a good time to offer to the rest of the JONGs, MAGS, and other Jabronis here on forum.
I've been printing these 3D topos for a bit of time, initially to assist with route finding while touring, but when offering my services to people in the Seattle area, most just want snaps of Volcanoes around the PNW.
Since its a total PITA and time consuming to get specific/custom zones figured out, here's the process that's been marinating in my head past coupla weeks:
$20 for a 180X180mm (6X6") square of a location of your choice, assuming I've already downloaded it (list found below). I will do my best to update this list if folks want a specific area. So someone will ultimately be sacrificing their five bucks for the greater good.
$25 for a custom zone of the same size.
$8 to ship first print $3 for subsequent prints.
I also have the ability to do some tiled, or arrayed prints too which come out looking slick. However, with the increased area, it tends to increase the volume as well, so reach out and we can figure out a price.
Here are the zones I currently have downloaded:
- Three sisters
- A basin
- All of lake Tahoe (this print needs to be done in an array, as the aspect ratio (elevation to distance) is too small otherwise)
- Alpental Valley
- Bear Valley CA
- Big Sky - Lone Mountain
- Hoodoo (Cascades)
- Charlia Lakes
- Cherry Ridge CA
- Chuckanut (arrayed ideal)
- Alpental Valley + Commonwealth Basin
- El Dorado Peak (N Cascades)
- Enchantments
- Grand Teton
- Hyak Zone - Snoq pass
- Mt Adams
- Baker Area
- Mt Hood
- Mt Pilchuck
- Shashta
- Bachelor (arrayed ideal)
- Mt Gardener (N Cascades)
- Presidential range
- Pickets (N.Cascades)
- Rainier
- Rainier + Crystal (two part)
- Schweitzer
- Shuksan
- Squaw
- St Helens
- Stevens Pass area
- Teton Peaks
- Three Fingers (cascades)
- Turnigan
- Foss Area
- Glacier Peak
Here are some examples of stuff I've made in the past:
Alpental Valley - 4 piece
Cascade Enchantments
Mt. Adams
If you're interested in having something made here are the instructions below:
1. Email me (not PM/DM on the forum as the messaging system sucks) at rfconroy at gmail dot com
2. Tell me which zone youre interested in. If you want a custom print, provide a google maps screen shot with a square (or pretty close to square) profile of the area you want printed.
3. Once I've send some screen grabs of the print preview, we'll figure out payment via paypal. As these are all made to order, I will need payment first.
Also: Being the gear hoarder and beer drinker I am, I am able/willing to barter for some good beers or interesting gear.
Lastly, I use my machines for a bunch of other ski/mountain bike related stuff too; mtb seal drivers, ski centering jigs, binding drill jigs, ext. Therefore if folks are looking for some of that stuff too, feel free to reach out.
Bookmarks