Tool Time

[Dumbest Known Time]

Inspired by Dee Hubbs over in the Ask the Experts thread, I figured bike tool fuckery needed its own home. Toolbox Wars contenders the real nerds out there, "which tool should I get" questions for the rest of us.

To kick it off, I need a new shock pump. The gauge on my Lenzyn pump shit the bed and I was never really that happy with how it interfaced with the valve on my fork. Which pump do I want?

[TBS]

You could buy a shock pump for your shock

Here’s one at my buddy’s shop
https://www.google.com/shopping/prod...C5Pm9AP3zrHIAQ

[Dee Hubbs]

How often to you use your shock pump?
Is it just in the garage/shop? Do you take it to trail heads?
Carry it in your pack?
How accurate do you want it to be?
I currently have 3 that I really like, and I am waiting on one to come into stock to purchase as a 4th.

[Dumbest Known Time]

How often to you use your shock pump?
Is it just in the garage/shop? Do you take it to trail heads?
Carry it in your pack?
How accurate do you want it to be?
I currently have 3 that I really like, and I am waiting on one to come into stock to purchase as a 4th.

Not all the often. Usually just in the garage a time or two a month.

[BigHerm]

I just bought the $75 Fox digital pump. Only have a few weeks use but so far, so good. Was tired of the estimation using a tiny analog pump. It's as small as the analog too without the round gauge part.

[Dee Hubbs]

I have a Lezyne Shock Digital Drive, basically a floor pump for your shock. Its great to fill a shock/fork after a rebuild, the digital gauge is accurate, and it has a valve with a bleed button, and an isolation valve to separate the air in the hose from the shock, it makes removal easy. Negative is it only goes to 300psi if you need a high pressure (350psi) pump.
I also have a Leyzne Digital Shock Drive in my travel tool box. Its small enough to carry in a hip bag or backpack if you're doing suspension fine tuning on the trail. It's really accurate/consistent, and has a simple digital readout. Some complain it needs a battery, but it will blink low battery for 2 months before it actually dies. I have spare batteries on the parts wall. (goes to 350psi)
I aslo have a Topeak PocketShock DXG. Analog readout, valve that isolates the shock from the hose, simple and strong. I'm going to buy the XL version of this pump for the garage and use the smaller one for trail head/car. In the garage it can be a little longer and does not need to be so compact.

To me the valve that isolates the hose from the shock is important feature. This type of connector eliminates air loss when disconnecting the hose. You pump the fork to 102psi, isolate the hose from the shock valve, release the pressure from the hose, and then remove the valve from the shock, this way exactly 102psi stays in your fork.
The one way valves puts a combined 102psi in the fork and in the pump hose, and when you unscrew a pressurized hose a few psi are lost from the combined hose and fork psi.

Thats my take on shock pumps.

[Dee Hubbs]

I’m a total bike tool nerd, this thread can get dangerous for me.

[panchosdad]

How often to you use your shock pump?
Is it just in the garage/shop? Do you take it to trail heads?
Carry it in your pack?
How accurate do you want it to be?
I currently have 3 that I really like, and I am waiting on one to come into stock to purchase as a 4th.

I started losing air on a ride, buddy whips out a shock pump and we manage to get back out 5 miles pumping it up a couple times. Now I carry one for a group on a longer ride.

[climberevan]

I recently bought a set of PB Swiss hex wrenches and am in love.

I'll post my more-ghetto-than-Dee's-crazy-setup tool organization system later. I thought about going the full foam encased route but the space it would take up and and cost deterred me.

[Dee Hubbs]

The PB Swiss hex are nice, but Wera's Hex-Plus design have a way better engagement.



And for 1/4 hex bits Wiha make the best.
BUT If you ever have a rounded out T25, the Wira Torx wedge bit will get you out of a sticky situation.

I purchase a lot of these from KC Tools, their motto is "America's #1 German Tool Distributor", but it should be "we will take your first born as payment.... "

[nickwm21]

If you’re going to buy only one Knipex plier/wrench - what size? The 10”?


Sent from my iPhone using TGR Forums

[criscam]

i need to start building up my bike tool set and figuring shit out myself. any reccs on a intro type set that won't break the bank and i can gradually add to?

[climberevan]

If you’re going to buy only one Knipex plier/wrench - what size? The 10”?


Sent from my iPhone using TGR Forums

I like the 7". It goes big enough and it's way more maneuverable under sinks etc.

[evdog]

Back to shock pumps, I have a few standard Fox/Rockshox pumps that came with forks or shocks I've bought. Never seen a reason to buy anything else for home use.

I did buy this Topeak microshock for rides though. I've had a few instances bikepacking where I realized I didn't add enough air to my suspension vs unloaded riding. 48g is worth the penalty for some peace of mind IMO. https://www.topeak.com/global/en/pro...353-microshock

They don't seem to sell it in the US. I had to order from Wiggle in the UK.

[Andeh]

I like the 7". It goes big enough and it's way more maneuverable under sinks etc.

I also have the 7" Knipex and haven't run into a situation for bikes yet where I needed a bigger one.