Results 226 to 228 of 228
-
06-12-2024, 01:26 PM #226
That's the reasoning behind my desire to find/create a drip lube that equates to the MSW formula. It should have no effect on the mix when rewaxing.
Naphtha evaporates pretty quick and clean so I don't think I'm introducing any real amount of petro to the solution.
Any chemical guys here to disagree?
-
06-12-2024, 02:23 PM #227
I’ve been doing Silca immersion wax, that lasts about 60-100miles on mtb/100-200 on drop bar bikes in dry conditions-then SS drip every couple of rides as needed. Frequency increases as we start riding in the high country with water crossings/snow drifts/rain storms.
Re-hot wax every 2-3 months.
I experimented with Silca Synergetic this spring on the gravel bike and down in Sonora for a few big mtb rides. That stuff is legit. Very much on the clean side for a “wet lube”. In Sonora we started 2 rides with 15 steam crossings in 3 miles, then had a few hours of desert dust, and the chain was running sweet the entire ride. Evan, this stuff would have been great in Scotland.
Sent from my iPhone using TGR Forums
-
06-13-2024, 02:36 AM #228one of those sickos
- Join Date
- Oct 2005
- Location
- Tahoe-ish
- Posts
- 3,284
Yeah, the Synergetic would prob have been the perfect lube for this trip. HOWEVER, since I forgot both of our chains ("I'll just give these a last hot wax and hang them here to cool while I pack the bikes.") and had to buy new ones in Inverness, I was subject to what they had there. I bought an expensive bottle of Peaty's lube that they recommended. It is pretty nice, and the chains didn't gunk up badly at all, but it seems to wash off after a couple of hours of rain or a few miles of riding in stream/trail, so an application never lasted a full day. I'm interested to check these chains to see how much they have worn with basically mud and water to lube them for several hundred miles.
ride bikes, climb, ski, travel, cook, work to fund former, repeat.
Bookmarks