Results 1 to 10 of 10
Thread: 186 Jeffrey 114
-
04-09-2021, 04:21 AM #1Registered User
- Join Date
- Nov 2018
- Posts
- 751
186 Jeffrey 114
Continuing the selloff of skis that I unfortunately wasn't able to get on this season and deserve a better home.
These have seen a fair bit of use (though not from me), and I've done quite a bit of work on them to get them in decent shape. As you can see from the pics the bases have seen a fair amount of damage. I cut out any significant core shots and put new base material in (thanks to Tuco for the awesome tutorials in tech talk, and to ON3P for the base material). Fair amount of minor scratching and scraping too, which the photos should capture. Edges are well-used, though still solid with no cracks or anything. Still a ton of base and edge left so could be ground if you wanted - on3p thick bases and edges are no joke. Top sheets had a fair amount of chipping, which has all been coated in g-flex now.
2.5 mounts - all for pivots. 3 sets of toe holes, 2 sets of heel holes. I don't know the BSL of all of the mounts, but I'm currently in the innermost set of holes for a 296 BSL, which puts my -1 of the line. All old holes plugged with bamboo and g-flex. A couple of the older holes were drilled closer together than I would have liked (maybe 6-7mm on center), but most are sufficiently far apart. Given that all the prior mounts were for pivots, I suspect that if you are a pivot user you could find a set of holes that would work for your BSL, as long as you're somewhere between 295-330 BSL and are willing to be flexible about mount point. Can't swear to that though.
Currently mounted with pivot 14 GW that have never seen snow, so are essentially brand new.
Looking for $150+ship flat, $325+ship if you want the clamps. Paypal FF or Venmo. Willing to split if I have buyers for both. Interested in trades for a playful 50/50 ski in ~108 width and ~184 length.
(sorry for sideways pics)
-
05-10-2021, 11:21 AM #2Registered User
- Join Date
- Nov 2018
- Posts
- 751
-
06-01-2021, 09:51 AM #3Registered User
- Join Date
- Nov 2018
- Posts
- 751
bump - open to any offers
-
08-17-2021, 06:17 AM #4Registered User
- Join Date
- Nov 2018
- Posts
- 751
bump - got some interest in the spring but didn't shake out, so back up for sale; also interested in mtb or dirt-jumper related trades
-
08-17-2021, 08:27 AM #5
Nice match on the herringbone basewelds.
-
08-17-2021, 01:58 PM #6Registered User
- Join Date
- Nov 2018
- Posts
- 751
Thanks! They aren't perfect like Tuco's but I tried to get them as close as I could
-
08-17-2021, 02:31 PM #7
-
08-17-2021, 02:53 PM #8
Where you located, interested in any trades for stuff/gear/belly button lint?
"Poop is funny" - Frank Reynolds
www.experiencedgear.net
-
08-18-2021, 05:47 AM #9Registered User
- Join Date
- Nov 2018
- Posts
- 751
I didn't drill any of them so can't swear to how centered they are. I'm at the office now but if someone is legitimately interested I am happy to take measurements this evening to give a sense of how close to center any of the holes are.
Where you located, interested in any trades for stuff/gear/belly button lint?
Big picture - I didn't pay much for these but did put a fair amount of work into them, so don't want to give them away, but also would rather they get used than sit in my garage. So I'm very open to reasonable offers.
-
08-20-2021, 06:22 PM #10Registered User
- Join Date
- Nov 2018
- Posts
- 751
Sold
Bookmarks