Results 1 to 7 of 7
-
04-02-2021, 10:08 PM #1
Shimano Brifter- front Cap or Cover?
Picking up a older pair of Shimano 105 brifters- probably around ~15 or so years ago (9 speed). The one front cap cover that sits just below the hood is missing. How easy is it to get a replacement? I've done a bit of searching (Ebay, Amazon both), but not sure if it is sold separately? Short of finding a old similar brifter (that is not all that expensive), or trying to maybe 3 D print one, any ideas suggestions or leads?
Last edited by RShea; 04-04-2021 at 06:41 AM.
-
04-02-2021, 10:27 PM #2Registered User
- Join Date
- Oct 2010
- Posts
- 1,958
Hens teeth, bro. Best bet is to find a junked pair on eBay for parts.
-
04-03-2021, 08:14 AM #3
They look like ST-5510 (should be stamped under the hoods on the inside)
If they are ST- 5510s the part number you're looking for is:
Y-6GP 98070 Name Plate and fixing screw (https://si.shimano.com/api/publish/s...-5510-2171.pdf)
Or they could be ST 5500, if so the part number you're looking for is:
Y-6B9 98120 RH name plate and front cover
Y-6B9 98130 LH name plate and front cover
(https://si.shimano.com/api/publish/s...0-CA-1934A.pdf)
-
04-03-2021, 10:33 AM #4Registered User
- Join Date
- Oct 2010
- Posts
- 1,958
Shimano Brifter- front Cap or Cover?
Looks like someone is finally 3D printing them and selling on eBay, but they sort of look like dog shit. Really poor edges and finish.
I used to rebuild dozens of old bikes every year for the bike swap, so I had a bunch of these pass through my garage. Check your model number and I’ll go through my parts bin.
-
04-03-2021, 10:35 AM #5
THANK YOU!!
You nailed it. I posted the photo from the guy selling them while they were on their way and he did not state the exact model (just 9 speed), you are 100% right as they just arrived and first thing I did was pull back the rubber hoods to see the exact ST55x0 series number. They are the first listing ST-5510.
That may help in my search and maybe get lucky sourcing the black one. Or get a silver and do some painting even.
-
04-03-2021, 11:53 AM #6Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,028
I'm missing one on my 15 yr old CAAD 7 , I laid the bike down gently in some loose gravel at low speed, not worrying about it,
just going 23 to 25 mm bigger tires help the handling a bunchLee Lau - xxx-er is the laziest Asian canuck I know
-
04-04-2021, 06:39 AM #7
I received them and in fact it is the ST-5510 black model. If you get a chance to check you parts bin for a cover, that would be great. Cover and a screw would be even better, but assume I can get a screw that will work somewhere. Or if you have the silver, I'd take that and do some painting even...
Do you have a link to the Ebay listing for the 3D printing. Maybe now that things are opening up, I can check about 3D printing options (our library has a 3D Printing machine, but had been closed for many months.)Last edited by RShea; 04-04-2021 at 07:21 AM.
Bookmarks