Results 1 to 5 of 5
Thread: Marker Dukes / Barons / NEW S914
-
03-16-2021, 05:44 PM #1
Marker Dukes / Barons / NEW S914
Time to unload some clamps that are laying around not getting any use.
Used Marker Duke EPF - 2 small (1 inoperable) / 1 large. I think I have all of the screws for 2 sets. 110mm brakes. The screw that adjusts the AFD height on one of the smalls came out of the slot and I can’t get it back in. Guess someone could run a large and small on a setup? Is the duke heel maybe compatible with jester / Griffon tracks - don’t have either so can’t check. $125 shipped for the 3?
Marker Baron EPF - Small - 120 or 100mm brakes - can’t remember which one the Baron takes - both seem to fit. Dont have the heel plates or screws. Also, on one unit, the riveted cylinder going into the toe piece wing popped out. I turned the DIN down and was able to pop it back in. Can’t tell if the hole at the bottom is a little wallowed out but cranked the DIN back up and seems to be holding - would recommend a bench test for anyone wanting to ski. $40 shipped
Brand new set of Salomon S914 on the Axe+ plates... these are a bit of a relic. Skinny brakes but easily bent or swap arms with other S900 / STH. Believe they can be mounted without the plates if you cut the screws down to account for the delta. $115 shipped? Price police away.
Sent from my iPhone using TGR ForumsLast edited by OldSchool1080s; 04-11-2021 at 07:59 PM.
-
04-11-2021, 07:58 PM #2
Back up top...
Sent from my iPhone using TGR Forums
-
08-25-2021, 04:47 PM #3
Season will be upon us soon. Anyone need any of this stuff? Would rather see it go to use than sit in the closet.
Sent from my iPhone using TGR Forums
-
12-16-2021, 10:00 AM #4
Anyone need any of this stuff? Still sitting in my closet
Sent from my iPhone using TGR Forums
-
12-16-2021, 11:51 AM #5
PMd on Barrons.
Bookmarks