Results 1 to 23 of 23
-
02-19-2021, 07:13 PM #1Registered User
- Join Date
- Nov 2015
- Location
- SLC
- Posts
- 954
Mechanical vs Hyrdo Discs for All road/gravel bike
Hey all, I'm getting caught up in the specs of a few gravel bikes. The last road/gravel bike I bought was a 1985 Specialized Sequoia which I've put some 32mm knobby tires on and taken on some gravel rides and light singletrack. I'm looking to upgrade but most of the bikes in my price range come with mech disc brakes. Is this a huge set back for braking performance or is this only an issue for those that are doing long descents in mixed conditions? I haven't used mechanical disc brakes before, only hydros on my Offering and rim brakes on the Sequoia so just wanting to get some input. Cheers!
-
02-19-2021, 07:35 PM #2
Cable brakes with dual pistons work well, if set up properly. Maybe not as good as hydros but the terrain you expect to ride may dictate if they will work well enough for you.
-
02-19-2021, 09:12 PM #3
Are you willing to squeeze the lever harder? I run TRP mechanicals with big rotors on my mountain bike and that's the biggest difference. My forearms wish I had hydros after 2000ft of descending, but they are super reliable and never drag, never need bleeding.
-
02-19-2021, 10:25 PM #4
-
02-20-2021, 08:10 AM #5
hydro if you can, but this year what ever is in stock.
-
02-20-2021, 08:49 AM #6
Some online bike retailer was sending out emails on sale items, including hydro Shimano brifter/ caliper sets, for cheap - $200s-300s range. Some Di2, some mechanical shift. I can't remember who it was though - maybe Universal Cycles? Worldwide? Colorado Cyclist?
I know this isn't that helpful, but if you're searching for a Shimano upgrade, maybe worth chasing down at all the usual places.
-
02-20-2021, 10:50 AM #7
One benefit to mechanical discs is that if you ever are gong to do bikepacking, or long/remote rides, you can carry an extra cable and field service your brakes. Hydro not nearly as easily.
I still like hydraulics, but lots of people I know run mechs for this reason.
-
02-20-2021, 01:27 PM #8
Back on a computer and did a quick search - here you go:
https://www.universalcycles.com/shop...s.php?id=67778
Scroll down on that page for more links.
-
02-20-2021, 02:40 PM #9Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,043
My take on mechanical vs Hydro
my first disc brakes were hayes hydros, they broke lots and werent all that powerful
so my next disc brakes were Avid BB7 cables they had more power than the Hayes Hydro's and didnt modulate quite as well
big BUT there was zero maintenance, if anything did fubar you are looking at a regular brake cable not hose/fluid/bleed, this became an issue for a buddy touring in europe on an old bike with some shitty old hayes mags
I would definatly want real hydros for any DH/ enduro/ mtn bike but I suspect cable discs will have enough power on a gravel bike,
my new entry level fat bike has cable discs and they are fine for the slow speeds and i don't have to worry if they are gona work in the coldLee Lau - xxx-er is the laziest Asian canuck I know
-
02-20-2021, 03:12 PM #10Registered User
- Join Date
- Sep 2007
- Posts
- 506
How about ease of learning installation and adjustment, mechanical v hyrdro disc brakes, for old guys who only know how to wrench rim brakes?
I'm guessing mechanical but I've been known to guess wrong. And I'm inclined to that guess b/c I like the idea of carrying a spare cable.
-
02-20-2021, 03:35 PM #11Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,043
For mechanical you need a few of the normal hex wrenches the inner and outer cable is just standard brake cable
back in the day I drove 6hrs with a bike on the roof, get to sunpeaks to ride lifts, somehow the line has a hole in it, so gotta spend 60$ getting a new line and bleed
everything you need to know to work on brakes is on youtoobLee Lau - xxx-er is the laziest Asian canuck I know
-
02-20-2021, 03:51 PM #12
Worst (and not really that bad) part of disc brake install is aligning the caliper which is the same for both mech and hydro. Cable adjustment is super easy, much like rim brakes, and bleeding brake lines isn’t too bad
-
02-20-2021, 04:04 PM #13Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,043
the avid BB7 were great cuz they had the big red knobs one on each side to adj pad clearance
I thot they were great compared to hayes hydros which were always dragging and fucking upLee Lau - xxx-er is the laziest Asian canuck I know
-
02-20-2021, 04:29 PM #14Registered User
- Join Date
- Sep 2007
- Posts
- 506
-
02-20-2021, 04:40 PM #15Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,043
I could be wrong but I believe there are road cables and there are mtn bike cables, the difference being the amount of cable the lever needs to pull ...something to check if you are buying a brake component on-line
Lee Lau - xxx-er is the laziest Asian canuck I know
-
02-21-2021, 01:34 AM #16
I have TRP Spyres, they're ok. They don't compare to the power of my 4-ish year old single piston XT's that are on my mtb. I've found the Swiss Stop pads work best on them, kinda spendy though. Maintenance is pretty simple, the callipers are easily rebuilt within about 25 minutes.
Make sure not to swap bikes in the middle of a long ride with your buddy that has a nice set of GRX etc. Going back to the mechs after that is quite the difference.
-
02-22-2021, 03:10 PM #17
Just go hydro unless you are headed to South America or something like that.
-
02-22-2021, 04:12 PM #18
-
02-22-2021, 05:39 PM #19
Get hydraulics.
I've been on road/drop bar disc set up forever. I've ridden BB7's, Tektro Lyra's, Shimano CX75's. Hayes MX3's and TRP Spyres and every one of them with compressionless housing (which I contend is a must for mechanicals). I've commuted year round in Vancouver with these. My good disc road bike had Shimano hydros from day one so I was well acquainted with how well they worked. I moved the commuter mech disc bike over to Shimano 105 hydros about a year ago.
I can say that after 10+ years on mech disc they are a big compromise to hydraulics. And, as an added bonus, when it did actually freeze in Vancouver the rear cable would seize in the water filled housing since all newer bikes have the run on the left chainstay and the housing always faces up to meet the caliper.
Mechanicals are fiddly. You must constantly adjust for pad wear. Hydros: no.
Mechanicals are cheap. That's it. Hydros are every bit worth the price premium but the road ones are costly, no doubt.
-
02-22-2021, 05:43 PM #20Registered User
- Join Date
- Nov 2015
- Location
- SLC
- Posts
- 954
Cool, thanks for the input. I know how to work on hydros coming from the mountainbike world so maintenance isn't much of an issue, just the extra cost and whether or not the terrain I'll be riding warrants the extra stopping power and responsiveness. After calling around to some shops it really seems that mntlion hit it spot on with whatever is available.
-
02-23-2021, 07:26 AM #21
-
02-23-2021, 09:07 AM #22
Haven’t had mechanical brakes on my car for years. Hydro = better in all respects. And super reliable. All shops stock parts for big brands.
If you’re going super remote bring some parts. Just like for your shifting system.
Sent from my iPhone using TGR ForumsI rip the groomed on tele gear
-
02-23-2021, 01:14 PM #23Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,043
all shops in America where you can drive in your car to get a mtn bike serviced may have the part and you don't care cuz you just get back in yer car would not be super remote.
On the road loaded with panniers lost in a city of millions of non english speaking heathens, that never sees mtn bikes, would be super remote at least to the last sentance
and you might have to wait for parts in any case it speaks to what you want to do/ what do you need/ what is the best for your app?
Couple yars ago my buddy broke down touring in yurp with an older kona mtn bike avec hayes, they fixed it by selling him a set of BB7 he got home and took a bike maintenance course
another buddy had an issues in south america on a 55000 km jaunt this time with a internaly geared hub, he sent it off twice the second time the mfger said it was too much for the product to handle, yeah its not brakes but the point is that it was not an easy local fix like a simple der system would have been ... same idea different componentLee Lau - xxx-er is the laziest Asian canuck I know
Bookmarks