Results 1 to 11 of 11
-
02-06-2021, 04:39 PM #1
Bent hangar on a BMC Fourstroke 02
Just picked up a cheapish BMC Foustroke 02 for the missus. Upon delivery find out it has a cracked and bent hangar. It's possible to buy hangars but they all ship from Lithuania and Israel and places lie that, so not really cheap and takes a while.
I ordered one, part D515, but then started to wonder -- anyone now if this is a common problem on these bikes, or was getting a bent hangar just a fluke? Wondering if it makes sense to buy a backup. TIA
-
02-06-2021, 04:45 PM #2
I can't imagine it's a common problem, it was just on a used bike that probably got ridden fairly hard. On a bike like a BMC that's not widely carried in bike shops, I'd err on the safe side and always have an extra in the tool box.
-
02-06-2021, 04:54 PM #3
Do you have a Shimano Direct Mount Derailleur?
Wheels Manufacturing make both the #336 (direct mount) and the 335 (standard mount) and they are in stock at BiyclePartsDirect.com with free shipping.
And yes, with a non common hanger its worth an extra $40 to have one on hand.
-
02-06-2021, 04:59 PM #4
-
02-07-2021, 04:20 PM #5
have you hunted on ebay?
called BMC dealers in country?
-
02-07-2021, 05:47 PM #6
-
02-07-2021, 10:24 PM #7
-
02-07-2021, 10:56 PM #8
-
02-08-2021, 07:28 AM #9
thanks!
-
02-09-2021, 04:02 PM #10
In case anyone falls into a similar problem as me -- trying to find a hard to find part -- I called and had a nice chat with Bicycle Parts Direct. There was some confusion about parts numbers. I took a photo of the part I had (installed on a bike, and broken, so I did not want to take it off, but so the whole part was not shown) and the guy I talked to was able to find the correct part, which was the part referenced here, it turns out.
-
02-09-2021, 11:32 PM #11
You don't have to tell me I was was right.
Bookmarks