Results 76 to 99 of 99
-
04-05-2022, 07:00 AM #76
-
12-20-2022, 12:30 PM #77
Wanted to resurrect this thread.
Does anyone know if the 26/26.5 and 27/27.5 upper cuffs are the same on the lupos/Kryptons?"Poop is funny" - Frank Reynolds
www.experiencedgear.net
-
12-20-2022, 05:05 PM #78
Kewl stuff, me luv sum innovateshuns.
I have KR Pros but not Lupos, I would like grip walk.
Been mulling over the Tecnica Scouts.watch out for snakes
-
12-20-2022, 05:49 PM #79
-
12-21-2022, 09:04 AM #80
-
12-21-2022, 09:16 AM #81
-
12-21-2022, 12:00 PM #82"Poop is funny" - Frank Reynolds
www.experiencedgear.net
-
01-23-2023, 08:05 PM #83
In this groups opinion… What wrap intuition liner would work best to get a good fit in a lupo with a Il moro cuff? The stock liner for the lupo isn’t a wrap and is flimsy. I’ve tried some older wraps and they’re not quite working
Sent from my iPhone using TGR Forums
-
03-21-2023, 09:17 AM #84Registered User
- Join Date
- Nov 2016
- Posts
- 1,404
Is it possible to do this in reverse? Ie add walk mode to some kryptons? I've got Kryptons with the tech toe/heel and want to add walk mode so I can use them for a travel boot
these ones: https://www.backcountry.com/b/dalbel...iABEgIiJ_D_BwE
-
03-21-2023, 09:37 AM #85Registered User
- Join Date
- Oct 2009
- Location
- Golden B.C.
- Posts
- 625
Yes
Sent from my iPhone using TGR Forums
-
03-21-2023, 11:17 AM #86
-
03-21-2023, 12:10 PM #87Registered User
- Join Date
- Nov 2016
- Posts
- 1,404
-
03-21-2023, 05:44 PM #88
-
03-23-2023, 11:33 AM #89
I did the mod and turned my lupo into a krypto. I feel like the upper cuff won’t flex, just the tongue. Any recommendations ?
Sent from my iPhone using TGR Forums
-
03-23-2023, 11:44 AM #90
-
03-23-2023, 05:25 PM #91I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
You want that little flap that is riveted on to the back of the lupo lower. It stops the lupo cuff from hinging too far forward and getting wedged over the cut out in the lower clog. You can only unhook it by taking the cuff out. Easy mod to do.
I’d also want a gaiter on there. With the tongue off, your boot would be wide open.
-
03-24-2023, 10:59 AM #92Registered User
- Join Date
- Jun 2013
- Posts
- 66
Kind of a late reply since it sounds like you swapped cuffs already but I would see if you can also get the il moro liner. I tried all the Lupo liners and like the il moro liner the best although there was one Lupo liner that was ok and not too sloppy in the forefoot. It might've been from the AX HD jammed into the Pro HD to take up space, tongue liner, not wrap but jamming the wider liner into the narrower boot seemed ok if it didn't pack out too quick. Fitter seemed to think the il moro wrap would pack out to feel like that liner in new condition so better long-term, but more work initially.
The il moro wrap is a strobel sole so better with foot beds, although it seems like there is too much foam thickness in the arch area for anybody with shell contact through the mid foot and it may need to be compressed separately after the first heat mold.
-
03-26-2023, 09:20 PM #93
I thought I pulled the right hardwear - Can you post a pic of it ?
Sent from my iPhone using TGR Forums
-
11-07-2023, 01:42 PM #94Minion
- Join Date
- Jan 2016
- Location
- Belgrade, MT
- Posts
- 1
Looking for Cascade walk lever
Anyone have extra an extra set of Cascade Components walk lever? I wish they would do another run.
-
11-07-2023, 02:32 PM #95
Me too ...
-
11-07-2023, 10:21 PM #96Registered User
- Join Date
- Mar 2020
- Posts
- 209
I've got some 26.5 Krypton II clogs left over from a kryptolupo conversion if anyone wants em?
-
02-03-2024, 04:15 PM #97
Curious about this horseshoe/gusset thing. I’m missing the one on my right boot. Looks like it just tore away from the rivet. Either that or my boot fitter ripped it out when he did some shell work earlier this year and didn’t tell me.
I can’t quite figure out the functionality of these things. Are they just to keep snow out of the clog? In the Kr2, there’s a little piece that fits into the “U” between the fingers and slides up and down the “U” to customize stiffness of the boot but tge horseshoe/gusset doesn’t do that on the Pro HD so I’m not sure what it is for or if I need to worry about it missing. Haven’t noticed any difference in feel.
-
02-03-2024, 04:48 PM #98I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
The gusset stops the upper cuff from getting stuck in the forward position when you bend your ankle in walk mode. The bottom of the cuff will get snagged on the V notch on the lower. You have to unscrew the cuff pivots to get it unstuck.
-
02-04-2024, 06:46 AM #99
Bookmarks