Dynafit Binding Spare Parts

[knowsam]

Hi,

Any one out there working in a shop that happens to have spare volcano for an older set of dynafit TLT vertical bindings? T

Thanks

[XXX-er]

check out B&Dskigear.com

[I've seen black diamonds!]

skimo.com sells used parts, I think. I think I have the top plate for an old TLT Speed that might fit if you want an inelegant solution. Cant remember if the screw holes match up between those generations.

[knowsam]

Thanks both - some solid resources there!

[I've seen black diamonds!]

I just checked, and I do have a TLT speed top plate but it won't fit a Vertical, nor with th B&D plates.

Here is the skimo.co used parts page, but it doesn't look like they have what you need in stock either (although it might be worth calling): https://skimo.co/used-dynafit-parts

If you're not running brakes you could use pretty much and Dynafit heel up to the Speed Radical (newer models have a different pattern) and drop it in the same holes, although pre-Comfort models have less adjustment range. Plum Guides also use the same pattern.

Good luck.

[Boissal]

I have a few spare FT and ST heels that are in various states of disrepair and probably will never be used again. Shoot me a PM and I'll send you pics of what I have, if you can part with a few $$ for shipping (and maybe for a decent 6-pack for making me wander into the PO ) I'm happy to send something your way.

[JaytaeMoney]

Bumping this, upgrading my touring setup and wondering if ski crampons from my 2016 TLT Radical FT's will work with the current ST Rotation 12.

[grinch]

I have some extra speed turn 2.0 heel top plates. The og metal top plates that you affix one or 2 plastic donuts to alter the climb height. I dont think i have the donuts but maybe somewhere. Still has a decent high position without. Free plus shipping if anyone can use them(from canaduh)
Id like to find 2 heel pieces with the og dfit mounting pattern like a speed turn 2.0. Nice to have that adjustment range. Speed heels or plum heels would work also, if anyone is offloading

Sent from my SM-G950W using TGR Forums mobile app

[Spyderjon]

Bumping this, upgrading my touring setup and wondering if ski crampons from my 2016 TLT Radical FT's will work with the current ST Rotation 12.

Yes, they're the same fixing system.

[JaytaeMoney]

Yes, they're the same fixing system.

Thank you sir

[xksrx]

A few spare parts from Older TLT bindings



Sent from my iPhone using TGR Forums

[Boissal]

Anyone holding on to a set of base plate with 110 mm brakes for some old Radical FTs (the 1.0 2016ish version)?
I have 2 sets of 130 mm plates and want to move the bindings on skinny sticks, 100mm underfoot. I've bent Dynafit brakes before to widen them but I haven't tried narrowing them. The skis+bindings are a gift for a buddy's daughter who is just starting to tour and he wants brakes for her. If I can avoid giving her some janky old bent stuff it would be ideal.

I have plenty of older Vertical ST/FT parts to trades if anyone's interested.

This is the binding:

[LeeLau]

For the life of me I couldn't find this thread. I have the volcanoes from old Dynafit Comforts. Free to whoever wants them

[knowsam]

I have a few spare FT and ST heels that are in various states of disrepair and probably will never be used again. Shoot me a PM and I'll send you pics of what I have, if you can part with a few $$ for shipping (and maybe for a decent 6-pack for making me wander into the PO ) I'm happy to send something your way.

Thannks for the offer - I ended up going with a Band-Aid fix of slow set epoxy, but if you're ever in whistler I owe you a pint for the offer... Cheers

[Boissal]

Thannks for the offer - I ended up going with a Band-Aid fix of slow set epoxy, but if you're ever in whistler I owe you a pint for the offer... Cheers

Glad it worked out. The offer stands if anyone else is in need of FT/ST parts, I have 2 sets mounted and 3 heels kicking around that I'd charge on without a 2nd thought.

[knowsam]

For the life of me I couldn't find this thread. I have the volcanoes from old Dynafit Comforts. Free to whoever wants them

By old comforts - do you mean Vertical ST's or pre-vertical, if vertical, I've got a case of beer with your name on it next time you're passing through the S2S. I've gone with epoxy for now, but given you're 10 min away, I might give replacing the volcanos at shot.

[LeeLau]

By old comforts - do you mean Vertical ST's or pre-vertical, if vertical, I've got a case of beer with your name on it next time you're passing through the S2S. I've gone with epoxy for now, but given you're 10 min away, I might give replacing the volcanos at shot.

Ah sorry Pre - Vertical. ER has two boxes of Dynafit parts fyi - I've added to it from time to time. Go have a look.

[Shred Baron]

Anyone holding on to a set of base plate with 110 mm brakes for some old Radical FTs (the 1.0 2016ish version)?
I have 2 sets of 130 mm plates and want to move the bindings on skinny sticks, 100mm underfoot. I've bent Dynafit brakes before to widen them but I haven't tried narrowing them. The skis+bindings are a gift for a buddy's daughter who is just starting to tour and he wants brakes for her. If I can avoid giving her some janky old bent stuff it would be ideal.

I have plenty of older Vertical ST/FT parts to trades if anyone's interested.

This is the binding:

I’ve got a pair of those mounted to some skis I’ve been planning to take off. They may be wider than 110mm plates as I think the skis are around that width. I’m out of town for work, but could check for you in the next week or so.


Sent from my iPhone using TGR Forums

[XXX-er]

Anyone holding on to a set of base plate with 110 mm brakes for some old Radical FTs (the 1.0 2016ish version)?
I have 2 sets of 130 mm plates and want to move the bindings on skinny sticks, 100mm underfoot. I've bent Dynafit brakes before to widen them but I haven't tried narrowing them.

Those brakes have arms that angle out wards to begin with so if you bend them in they will work better and its really simple

You bend them at the 90 and also just above the brake paddle so the arms tuck inwards on the back of the ski, this works well because when you step on the brake stomp pad the arms move up and then inwards

if the 90 degree part sticks out IME it doesnt matter cuz they won't catch with the tips of the brake nicely tucked in, i might have a picture

I own 2 pair of Verts and a Rad1 for redundancy so if something breaks I got spares, I took a whole heelpiece to Japan



This is a set of salomon arms in a Dynafit heel piece on a Lotus 120 you have to enlarge the holes in the base plate slightly to fit the arms in the baseplate




I think this is a 130 dynafit brake on a 108 Dynafit Stoke

I wish I had 3 pair of Verts instead of the Rad, rads suck

[rustyjux1]

Hey I'm looking for just the center metal tower bit on the Vertical ST heel (though I'd take the base plate as well). Any chance you or anyone else would be willing to part with one of these?

The local shop swapped in a Radical FT tower which works but I can't lock into the riser positions. Not sure if a Comfort tower would work as well or if its a different height, but sounds like a few folks have Vertical parts to share?

Happy to send some $ in exchange

[NMF]

I have a few spare FT and ST heels that are in various states of disrepair and probably will never be used again. Shoot me a PM and I'll send you pics of what I have, if you can part with a few $$ for shipping (and maybe for a decent 6-pack for making me wander into the PO ) I'm happy to send something your way.

Saw this post from a long while back. Any chance you still have a FT 12 heel that you're willing to part with? My heel piece is busted.

Best-
Noah

[skifishbum]

Anyone holding on to a set of base plate with 110 mm brakes for some old Radical FTs (the 1.0 2016ish version)?
I have 2 sets of 130 mm plates and want to move the bindings on skinny sticks, 100mm underfoot. I've bent Dynafit brakes before to widen them but I haven't tried narrowing them. The skis+bindings are a gift for a buddy's daughter who is just starting to tour and he wants brakes for her. If I can avoid giving her some janky old bent stuff it would be ideal.

I have plenty of older Vertical ST/FT parts to trades if anyone's interested.

This is the binding:

i haz what you need and can trade other parts

so i goes to ski mo the other day cause i need an 80 buck atk brake
i bring my bin o parts in lookin to trade some parts
they ask what do you want
im like well yeah couple decades in the business id think 50% off what you plan on selling them for is fair
dude pulls out 2 new rad 2 toes and 2 new heal with brake asemblies
and wants to trade a complete set of binders for an 80 buck brake
im like bob barker fuck no we aint makin that deal
heres my credit card
that math aint gonna work for me
so i got parts
pm and ill try and reply

[Boissal]

Saw this post from a long while back. Any chance you still have a FT 12 heel that you're willing to part with? My heel piece is busted.

Best-
Noah

I'll check tonight and send you a PM, can't remember what I have on hand at this point.

SFB, thanks for the offer, I don't need the FT12 plate any longer but I'm sure I'll break something else on a Dyna binding at some point soon.

[NMF]

Hey Boissal, I just joined so I don't have access to PMs yet. You can contact me through through Instagram at NMFCreations or though my email at nmfcreationsllc at gmail

The heel piece I have and need a new version of is that old original Ft 12 that ski fish boss has on the table between his two clear tubs.

Thanks again for checking!

I'll check tonight and send you a PM, can't remember what I have on hand at this point.

SFB, thanks for the offer, I don't need the FT12 plate any longer but I'm sure I'll break something else on a Dyna binding at some point soon.

[Charonrips]

Old touring boots were stolen, and have been unable to find the power insert horseshoes anywhere. Need these pieces to make my new boots compatible with my beast bindings. If you have a set around somewhere, I'll pay you for them.