Dynafit Binding Spare Parts

[toastybroski]

Sorry to bump an old thread but how do you remove the turrets from the heel of dynafit rotation bindings? I removed the screw, springs, and plunger and it rotates freely but will not come off of the base.

[kamtron]

https://www.wildsnow.com/23178/compa...ation-binding/

It's this "bayonet lock" design. I think you twist and pull simultaneously and they come off.

[Blaster]

Some assorted Dynafit parts

FT12 heel mounts and toes, plus most of the screws one would need for these. Mounting plate brakes fit up to 108 mm underfoot skis.

The toes were mounted without the 5th front screw for several seasons and now won't fully lock out in climb mode. One might be able to bend the front bit down so they work normally again.

Was thinking $20 + shipping from California for the whole package but happy to part things out.

[grinch]

I have some B&D 6.4mm toe shims for radical ft 2.0 bindings if anyone is looking.
New in packaging from skimo.
$21 plus shipping , half of skimo's price plus shipping from canada. Shipping is around 10usd

Sent from my SM-A536W using TGR Forums mobile app

[XXX-er]

The toes were mounted without the 5th front screw for several seasons and now won't fully lock out in climb mode. One might be able to bend the front bit down so they work normally again.

I mounted a set of ST the same without that front screw cuz i didnt want to drill for 3 screws across ( due to a remount ) which i felt would weaken that particular ski, I havent had a problem with the lockout not working but I would bet you could bend the frame a bit OR if the 5th screw was used it would probably suck the frame right down flat against the ski