Official ATK Binding Thread

[EricB]

My stock order will be arriving in a few days so I'll be able to measure the deltas on the Raider 14's, C-Raider 12's, Raider 12's, Crest 10's/8's & Release 10's.

Did you ever measure the ramp on the C-Raider 12's? Did that new toe piece make it any different than the R12 or R14's?

[Spyderjon]

Did you ever measure the ramp on the C-Raider 12's? Did that new toe piece make it any different than the R12 or R14's?

Sorry, I forgot - I'll check it tomorrow and let you know. The taller Freeraider 14 toe with the reduced delta is currently only available on the Moment branded version but it will be on general release in the future but quite when I don't know.

[CaliBrit]

Just arrived. Fuck me this is well built!!!!

[tgapp]

Just arrived. Fuck me this is well built!!!!

hey calibrit can you please tell me if there is a config on the m6 that would allow for the new C-Raider toes to be mounted? it should be 45 or 46mm square or so

[Norseman]

the M06... hottest jig in all the land.

[Spyderjon]

hey calibrit can you please tell me if there is a config on the m6 that would allow for the new C-Raider toes to be mounted? it should be 45 or 46mm square or so

Yep, the C-Raider mounting pattern is included in the jig. I'm not in my shop at the moment but IIRC they're the P3, H1 toe locations and the H,B heel locations.

[bry]

Hagan is accepting pre-orders for the next jig shipment due in Dec.

Powder7 has some fr14s in stock.

[timmaio]

Any one looked into the atk grease and if there would be any problems using molykote em 30l instead? I need to use it on the brakes which have stopped working so well

[Spyderjon]

Yep, the C-Raider mounting pattern is included in the jig. I'm not in my shop at the moment but IIRC they're the P3, H1 toe locations and the H,B heel locations.

I lied. The C-Raider jig pattern is P3, H1 at the toe and HH,HH at the heel.

[Spyderjon]

Did you ever measure the ramp on the C-Raider 12's? Did that new toe piece make it any different than the R12 or R14's?

The C-Raider pin heights are 43.5mm at the heel & 33.5mm at the toe = 10mm delta.

[D-Roc]

Has anyone else measured the helio 350 ramp?

[IanCH]

Who needs a jig?

[tgapp]

Who needs a jig?

me. i'm a total jong. i'm the reason why ikea instructions are as dumb as they are.

i want to mount my own fucking skis but i need as much help as i can to outsmart myself.

[D-Roc]

Who needs a jig?

ill buy it!

[tgapp]

Wait this is a jig for sale? D-roc, I'll fight you for it!! Hahahaha. I thought it was a rhetorical question, but 100% I'm interested in it

Sent from my Pixel 4 using Tapatalk

[XavierD]

I thought I saw moment was selling jigs earlier but now I don’t see them on there website. Any ideas where to get one?

[Benneke10]

Hagan is accepting preorders expected arrival early Dec
https://www.haganskimountaineering.c...6-mounting-jig

If any SLC people want to pool together for one I'd be interested...

[tgapp]

Hagan is accepting preorders expected arrival early Dec
https://www.haganskimountaineering.c...6-mounting-jig

If any SLC people want to pool together for one I'd be interested...

i actually have one on order, happy to loan it out to other mags

[CaliBrit]

I thought I saw moment was selling jigs earlier but now I don’t see them on there website. Any ideas where to get one?

Got mine from Hagan.

[Melee]

I thought I saw moment was selling jigs earlier but now I don’t see them on there website. Any ideas where to get one?

We have jigs for sale. If you need one shoot me an email - luke@momentskis.com

[Spyderjon]

Benneke10, three sets ready to ship

[Benneke10]

Thank you! Very excited to use these

[sf]

Benneke10, three sets ready to ship

Those look so good. Are you making/selling these on a regular basis? Couldn't see them in the webshop

[Norseman]

First day on the FR14... stoked. Solid, smooth, simple.

[paal]

Since I am obviously not the only one concerned about ramp angle:

After I ordered new touring skis yesterday, I have been browsing for new bindings pretty much non-stop I am a bit sensitive to ramp angle and have added quiver-killer inserts to the toe-pieces and 3d-printed various shims to get a fit I'm happy with on my previous setups. No big deal, but if I could just get something flatter right away for my new skis that would be ideal.
Sent some questions to ATK earlier today. Some of the discussion below:

Hi,
I am considering buying either RAIDER 12 or FREERAIDER 14.
Can you please tell me how much higher the ski boot will sit on the rear binding VS the front binding? (I may have to add a plate under the toe-piece if there is a lot of difference)

Dear Paal,

Thank you for your e-mail!

The drop in between toe and heel piece is just 11 mm.

It is a way lower compared the average pin bindings.

We are releasing toe shims ( +5 mm ) that will reduce the drop down to 6 mm only.

These will come in 30 days more or less.

Where are you writing from?

Best

Davide

Will these shims be like the ones you have for other bindings with adjustability to move forward / aft, or are they one single position only?
https://www.atkbindings.com/en/prodo...sories/r08a-2/

We are in the design process. We have both in our hands.

99% we will release both solutions =)

Best

Davide