Results 1 to 21 of 21
-
02-14-2020, 08:46 AM #1Registered User
- Join Date
- Aug 2008
- Location
- Central VT
- Posts
- 4,808
Car Mags: Slow Coolant Leak Fixes
My '15 GMC Sierra has a slow coolant leak. A quick search says there are several products out there that you simply dump in the reservoir - K seal, Bar's Leaks tablets and liquid. Curious how well these work and if its as simple a fix as I'm hoping. Any rec's for what works is appreciated.
-
02-14-2020, 08:54 AM #2Hungover & Homeless
- Join Date
- Oct 2010
- Location
- Funland
- Posts
- 1,820
Where's it leaking from? Hose, radiator, or block? The problem with that stop leak stuff is it's designed to plug small holes. Problem is your entire radiator is a bunch of small veins and if you use stop leak or whatever you're at risk of then plugging entire veins in the radiator potentially causing overheating issues.
Honestly the best thing to do is find the damaged part and replace it.
-
02-14-2020, 08:58 AM #3
-
02-14-2020, 08:58 AM #4
-
02-14-2020, 09:07 AM #5
A '15 shouldn't be leaking, find the source of the leak.
www.apriliaforum.com
"If the road You followed brought you to this,of what use was the road"?
"I have no idea what I am talking about but would be happy to share my biased opinions as fact on the matter. "
Ottime
-
02-14-2020, 09:30 AM #6
find the leak, then repair it
-
02-14-2020, 09:42 AM #7
-
02-14-2020, 09:59 AM #8
That shit is for broke ass students trying to keep their beater alive with no money.
Fix it right.
-
02-14-2020, 10:10 AM #9
Don't know anything about that engine, but a slow coolant leak can sometimes indicate a head gasket problem causing too much pressure in the cooling system.
Cars often have parts that are know to fail early. Could be as easy as the cap on your coolant reservoir or the reservoir itself. Check on a forum specific to your truck to see if people have had similar problems. That can give you some places to start looking first. That's your best bet for a quick easy fix. Pouring in any of the crap you mentioned isn't an option.
-
02-14-2020, 10:21 AM #10Registered User
- Join Date
- Aug 2008
- Location
- Central VT
- Posts
- 4,808
No, I wouldn't dump anything in there unless I knew it would work. I topped off the coolant 4-5 days ago and its sunk about a 1/2 in. below the fill line so I'm assuming its leaking. No clue as to where its leaking, I'll have to take closer look at it this weekend.
Truck runs fine, no issues with overheating or steam piling out of the hood.
Looks like this won't be a simple fix. ISBD - I'll def be digging through some forums to help narrow it down - hoping the head gasket isn't the issue.
-
02-14-2020, 10:25 AM #11
-
02-14-2020, 10:28 AM #12
-
02-14-2020, 10:30 AM #13Registered User
- Join Date
- Aug 2008
- Location
- Central VT
- Posts
- 4,808
-
02-14-2020, 10:44 AM #14
Get it hot again and track the origin of the steam?
-
02-14-2020, 10:52 AM #15Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,085
I wouldn't add that stuff, why back in the day out on the farm we would just get a handful of oatmeal from Ma in the kitchen
Lee Lau - xxx-er is the laziest Asian canuck I know
-
02-14-2020, 11:38 AM #16
-
02-14-2020, 11:41 AM #17Registered User
- Join Date
- Aug 2008
- Location
- Central VT
- Posts
- 4,808
-
02-14-2020, 12:47 PM #18
On the plus side, metal contracts when cold. May make it easier to find your leak.
Look for dried, white, chalky residue around all hoses and radiators. That is dried coolant. Hoses and their connections/junctions are the most likely culprit on newer vehicles, especially if it has quick connects with o-rings like most Fords.
-
02-14-2020, 07:12 PM #19
Does not sound like your coolant is leaking. The reservoir is not supposed to be full, it is in fact there to catch the excess coolant after it expands in the engine do to thermal expansion. I imagine this engine has some sort of bleed valve to keep your coolant level correct. Just make sure to have a gallon of distilled water around just in case.
Its not that I suck at spelling, its that I just don't care
-
02-16-2020, 05:34 PM #20Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,085
the rad is suposed to puke water into the overflow res when hot and then it gets sucked back into the rad when the engine cools
so the level in the tank will change depending on if the engine is hot or cold but the level should always be the same for a hot engine and the same for a cold engineLee Lau - xxx-er is the laziest Asian canuck I know
-
02-16-2020, 06:54 PM #21Registered User
- Join Date
- Jan 2010
- Location
- Seattle
- Posts
- 414
Bookmarks