ISO: STH2 Heel Plate Spacer

[oetk2]

Hoping someone can help me out with this. I'm looking for one of the black rubber heel plate spacers for the front set of holes on the underside of the heel plate on for an STH2. Can post picture later today. Tried 3 local shops and didn't find any, one of which said to order it I need to order the whole heel plate. Anyone have a spare in a parts bin they want to throw in an envelope for some beer $?

[S.B.]

I've replaced a broken one with a piece of scrap wood and some sandpaper. You could make one out of plastic too if you have a grinder

Sent from my SM-G960U using Tapatalk

[oetk2]

That's the plan if no one has one laying around

[oetk2]

bump. still looking if anyone is holding

[mntlion]

post a picture of the other one? I can look in my parts bins

[oetk2]

[mntlion]

sorry, nothing

[Muggydude]

If you know anyone with a 3D printer that’s how I replaced one I lost a couple years ago. East CAD and print


Sent from my iPhone using TGR Forums

[californiagrown]

I can forward you the shop order form that you can send to Salomon to order the part? Not the fastest or cheapest though.

If i was you, id go to the local hardware store or home depot, and ask around to see if you can get something that matches pretty well (probably cabinets or hardware) and use a utility knife to match alterations as neccessary.


Good luck!

[oetk2]

Thanks guys. I will take that order form, will PM contact info. Will order one and fab one and see what gets done first.

[tenB]

It might take a while to get one direct from Salomon. Have you stopped in to a couple of local shops and checked their parts bins?

[oetk2]

It might take a while to get one direct from Salomon. Have you stopped in to a couple of local shops and checked their parts bins?

3 with no luck.

[oetk2]

Ended up doing the 3D print. If anyone ever needs a spare I can throw one in the mail. Might need some filing to fit as the printer was acting up at the beginning.