Results 1 to 9 of 9
Thread: Warden toe adjustment
-
11-05-2019, 08:55 AM #1
Warden toe adjustment
I have a Cochise 26.5. I’m planning on buying a pair of Tecnica Mach I in the same size. Both are the same 305 bsl
Is there any adjustment necessary for the toe piece or can I just step in with both bootsLast edited by yellofin; 11-05-2019 at 09:30 AM.
-
11-05-2019, 09:04 AM #2
Why not spend two minutes to check it? Business card clearance to AFD (pull up at the toe).
... ThomLast edited by galibier_numero_un; 11-05-2019 at 02:34 PM.
Galibier Designcrafting technology in service of music
-
11-05-2019, 09:14 AM #3
Super easy adjustment, just did that this weekend with some demos. Like Thom says, remember to pull up on the toe
-
11-05-2019, 09:32 AM #4
-
11-05-2019, 09:41 AM #5
-
11-07-2019, 10:17 PM #6
Just smoke more weed dude
-
11-07-2019, 11:38 PM #7
http://salomontechnician.com/uploads...pine_16_17.pdf
page 40
biz card should slide in, or doubled paper, or just look for a tiny-ass gap with your eyeballs because its almost 2020 and we're paperless
Thom said pull up on toe (or back on cuff) because it won't necessarily be up at the top of toe piece when you click it in.
-
11-08-2019, 01:20 AM #8
^ Exactly, I just eyeball a hairline gap while pulling back on the cuff, tighten it a hair more until the gap disappears, and call it good.
-
11-08-2019, 07:34 AM #9
Thank's for all of the excellent info
Bookmarks