Results 6,426 to 6,450 of 13113
Thread: Ask the experts
-
11-09-2021, 10:25 AM #6426
yeah, well aware from my time working in a shop that noises are tough. Doesn’t mean I don’t wish I was better at diagnosing them though!
I have no patience for people who get on forums and complain that they took a bike to a shop because of a noise, and had to return because the noise wasn’t fixed.
-
11-09-2021, 10:42 AM #6427Registered User
- Join Date
- Feb 2014
- Location
- NorCal coast
- Posts
- 1,951
My most recent clicking diagnoses turned out to be worn out bearings in the derailleur jockey wheels (tried that after the bottom bracket). Pulling the covers off, the grease had been all flushed out and they had a lot of lateral play. I tried regreasing them and they were quiet for a ride or two but then it returned. I just replaced them with the $24 GX ones, and everything was quiet again.
-
11-09-2021, 12:15 PM #6428
What shoes should I get?
I’ve had a few pairs of Specialized 2FO Cliplite over the past few years and have zero complaints, but they’re discontinued. They strike a good balance between weight, stiffness and protection.
-
11-09-2021, 12:50 PM #6429
-
11-09-2021, 01:06 PM #6430
I’m also a fan of the ME7’s.
crab in my shoe mouth
-
11-09-2021, 01:24 PM #6431
Shimano ME5 if you want the boa in lieu of the sinch lace and flap
Sent from my iPhone using TGR ForumsBest Skier on the Mountain
Self-Certified
1992 - 2012
Squaw Valley, USA
-
11-09-2021, 01:26 PM #6432Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 30,896
get some that fit
I've had or have several pair of Spesh (lower volume thru ankle/ wider in front) and they all fit me
I wanted to like the 2 pair of Shimano i ended up giving away ( too much volume thru the ankle/midfoot ) but they just did not fit
I don't know if thats how all Shimano fit but I am sticking with SpeshLee Lau - xxx-er is the laziest Asian canuck I know
-
11-09-2021, 03:16 PM #6433Registered User
- Join Date
- Feb 2020
- Posts
- 259
I've got a 2019 Transition Patrol and its heavy AF. Looking to make it feel less sluggish and roll a bit better. I'm thinking losing some of weight on the rear wheel would be my best bet. I have a hydra hub, on a heavy spank rim. What would be the lightest strongest carbon rim I could upgrade to that is going to withstand a beating? I get a wellness bonus at work to use on stuff like this, so I'm not super worried about the cost. Those Nobl TR37s look pretty sweet. Is there something better if I'm willing to spend a bit more?
-
11-09-2021, 04:33 PM #6434
I have no personal experience but the video of Danny Macaskil trying to destroy the Reserve wheels is pretty compelling. I have carbon wheels on 3 of my bikes but I am not terribly hard on them. If I were, and I had the money, I would seriously consider those wheels.
https://youtu.be/VfjjiHGuHoc
Sent from my SM-N986U using Tapatalk
-
11-09-2021, 04:43 PM #6435
For just about every carbon rim out there, I personally know someone who has destroyed one. And for just about every carbon rim out there, I personally know someone who has beat the shit out of it without issues. And the same goes for aluminum rims.
With some exceptions, I think it kind of just comes down to luck. Of the current well respected carbon rim options, I think most of the options are decent.
-
11-09-2021, 04:57 PM #6436
-
11-09-2021, 05:02 PM #6437
-
11-09-2021, 05:06 PM #6438
Regarding the integrity of carbon, it has A LOT to do with quality control in manufacturing.
A German Mag from about 5 years ago did an extensive test of carbon handlebars. Cycling them hundreds of times to fatigue. Testing at least 3 bars from each model.
The end result was that only 2 brands had any semblance of consistency within their sample. For most of them, One of Brand A Model A bars would break early on in the number of cycles while another would go 2-3 times longer and a third would break somewhere in between. Or they would all suck, but the real takehome was that you wouldn't know which one you got until it failed.
Only Enve and Syntace had consistency within their runs. The Enve bars consistenly broke near the max limit of cycles. The Syntace bars, all of them, failed to break during the tests.
Now extrapolate that into the awesome video Danny did with SC rims. And it helps explain why that guy you know has broken 3 SC rims in the last 2 years. And why some bruisers swear by the SixC cranks and other people won't trust them. The quality control/consistency is getting better, but it still leaves a shit ton of room for inconsistency. Do you really think Race Face has mastered the QC game?However many are in a shit ton.
-
11-09-2021, 05:29 PM #6439
I'm a light weight, 155ish + gear and pretty smooth rider, I'd never really broken wheels and therefore eschewed carbon wheels as an expensive luxury even though in retrospect I spent a lot of time tightening loose spokes and truing out wobbles. Sold an unneeded bike in spring 2020 so splurged on some Reserve 30's....haven't had to touch them once in 2 seasons of riding, they've been awesome, and I love the way they ride.
-
11-09-2021, 05:39 PM #6440
Well, the crank thing is a bit different. Those are the aluminum inserts in the crank coming unbonded from the carbon. It's a tricky issue, because carbon cures with heat and the aluminum bits expand and then cool at a different rate than the carbon, which makes it tough to get a good bond. It's still a QC issue, but not really the same as a carbon rim exploding.
But that aside, fully agree that QC is an issue. I'd argue it's an issue on lots of bike products, including plenty of aluminum ones. The difference is that the industry has been working with aluminum for long enough to have figured out where they need to add in some extra material to account for realistic variances in QC. But back in the 90's when the industry was figuring out aluminum, frames (and plenty of other parts) broke all the time. Which is why modern aluminum frames tend to be pretty porky.
And 5 years ago, a lot of the carbon rim manufacturers hadn't quite figured things out yet, but most of them have gotten there now. Carbon rims from 5 years ago were a lot different than the current ones - ride quality was hit or miss (lots were too stiff), and plenty of them broke. Now they mostly ride really nicely, and they're generally pretty durable because the companies have figured out where to add a bit more material (or a different layup) to account for QC variances.
-
11-09-2021, 06:21 PM #6441Registered User
- Join Date
- Oct 2017
- Location
- Evergreen Co
- Posts
- 969
Random question that I've never tested.
Does a narrower MTB tire (like a 2.1 or 2.2) roll faster than a 2.35 on firm terrain? I'm looking at a few long bikepacking trips that'll be mostly dirt roads, some paved and just a little singletrack. Just wondering about ideal tires, I've only ridden 2.3 and above for the last decade plus.
I'm doing the white rim in a week so I'm thinking that might be a good place to test something narrower.
-
11-09-2021, 06:51 PM #6442one of those sickos
- Join Date
- Oct 2005
- Location
- Tahoe-ish
- Posts
- 3,141
I think tread pattern has a lot more impact on rolling resistance than a small difference in width. Get the least tread you can stand.
For the WR if it's moist, a 2.2 XC tire will be great. If it's dry you'll be happier with a bit more width for the floatation. You can prob get by with a full on file tread for the described bikepacking objectives.ride bikes, climb, ski, travel, cook, work to fund former, repeat.
-
11-09-2021, 06:57 PM #6443Registered User
- Join Date
- Dec 2009
- Posts
- 1,685
My experience on a hardtail, riding from Banff through Montana on the Tour Divide (for surface info). Two trips, similar routes.
When I was in shape, 1.95 and 2.1 renegades, Niner carbon fork. Fast and good, tubeless. Again, I was light and in racing shape.
Next time, plus 25lbs, solo so more gear. Carbon Firestarter fork. Went 2.35 Fast Trak front and rear. These were much better for me being heavier, more supple. Slower, but better
Sent from my SM-T580 using Tapatalk
-
11-09-2021, 08:32 PM #6444
Narrower is lighter and more aerodynamic, but if anything the wider version of a tire might have slightly better rolling resistance. It's pretty slight when you are comparing equivalent pressure. There's a reason no one rides 21-23mm road tires anymore and XC racers are starting to use 2.4s on 30mm rims. Plus with more weight more volume will be better.
I'm kind of on the fence for what to do with my next xc tires. A 2.25 mezcal already measures almost 2.4 on my wheels so I don't know if I should bother with the slightly heaver 2.35.
-
11-09-2021, 08:53 PM #6445
You’re likely only going to save ~50 grams going to a “endurobro” carbon rim. Unless you have a boat anchor back there.
I think the rim manufacturers beefed up their layup (and weight) in order to safely offer better warranties….
The other positives already mentioned are the main reason to go carbon; durability and ride…
I like my WAO Unions.
Sent from my iPhone using TGR ForumsBest Skier on the Mountain
Self-Certified
1992 - 2012
Squaw Valley, USA
-
11-10-2021, 08:39 AM #6446yelgatgab
- Join Date
- Oct 2002
- Location
- Shadynasty's Jazz Club
- Posts
- 10,249
-
11-10-2021, 08:54 AM #6447Not a skibum
- Join Date
- Aug 2002
- Location
- PA
- Posts
- 2,648
I always did love the 2.25 Mezcal for XC racing and did try an 2.3 up front on a 26ish internal can't say i noticed a huge difference between them. Another alternative idea might be go with an Aspen 2.4 but lower pressure, when dry that rolls incredibly and still corners pretty well for it's intended XC race purpose. YMMV on that suggestion but friend had a ton of success on that setup + a lightweight insert. Also should add that braking just slows you down, that's not fast, so no need to do it with setup above
-
11-10-2021, 10:26 AM #6448Registered User
- Join Date
- Feb 2014
- Location
- NorCal coast
- Posts
- 1,951
Yeah, I groan every time I'm riding with someone and they mention that they're "thinking of getting some carbon wheels to make their bike lighter." They seem really dubious when I say my Unions are like 1840g, and that a solid DT alloy set would probably only be like 1900-2000.
I ride carbon rims because they're more durable and track better. I've broken two WAO rims, and know that with my line choices I'd destroy an alloy rim every time I rode somewhere with rocks.
-
11-10-2021, 10:35 AM #6449one of those sickos
- Join Date
- Oct 2005
- Location
- Tahoe-ish
- Posts
- 3,141
As a counterpoint and reminder: not all of us are big dudes who do lots of smashy smashy shuttle riding. My 1390g carbon wheels have held up great for my 138# bulk and are at least 300g lighter than any similarly wide and strong alloy.
But if you're talking about endurobro-approved wheels, I agree that carbon doesn't really save much weight.ride bikes, climb, ski, travel, cook, work to fund former, repeat.
-
11-10-2021, 10:43 AM #6450Registered User
- Join Date
- Feb 2020
- Posts
- 259
Lots of good info - thank you guys!!
Sounds like I should just buy a set of lighter tires and put them on the old wheels I got warrantied and have sitting in the garage. Looks like I can save 200 grams per tire pretty easily just going from DD to Exo versus saving 100 grams per rim going carbon. The bike used to feel a lot more spritely when I had the Exo on there, but those tires never lasted very long on the rides I like to do. I could switch the wheels out to make the bike more fun for when I'm riding with the NICA kids. Then I could save this other set of wheels with the DD tires for when I'm doing the steep rides I like to do where the weight doesn't matter so much. Plus I would have the added bonus of making my DD tires last longer. Then I will work on carbon rims with next years wellness bonus
Bookmarks