Results 6,126 to 6,150 of 13303
Thread: Ask the experts
-
09-23-2021, 08:44 PM #6126
I think you’re tripping yourself up looking for a “11 speed SRAM hub”
I read “low end 11-speed SRAM”, and I assume it’s a HG freehub body. If your 11 speed cassette has a 11 tooth smallest gear (not a 10 tooth) than it’s a standard HG freehub.
The standard HG freehub is a also called a Shimano 8-9-10 speed.
You should be able to find plenty of wheels that are 27.5, 135 QR, HG freehub.
-
09-23-2021, 08:45 PM #6127
-
09-23-2021, 08:46 PM #6128Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,085
its was back in the day early 2000's but when asked Pippin the Banshee guy why he didnt make them in NA ?
He said Taiwan was the place to build bikes cuz they got the parts, they got the tubes, they got the welders they got the factories which he rented SO the expertise was all there
back in the day I bought an 86 marin with really shitty narrow tires but they did that for a reason cuz bikes with tires < 1.5 had a different tariff so the dealer brought the bikes in and upgraded the tiresLee Lau - xxx-er is the laziest Asian canuck I know
-
09-23-2021, 08:55 PM #6129
-
09-23-2021, 09:11 PM #6130
-
09-23-2021, 09:18 PM #6131
I think we discussed this earlier in this thread or in the tires thread but I’ve done the gorilla tape multi wrap to get a 20” tire to seat on a non tubeless rim. Eventually let the pressure get too low and he had a wreck. Bad parenting. I keep the pressure up a bit now and he is fine. I think trying to lower his rolling weight and give him a little smoother ride with his full ridged setup has been worth it but you have to keep an eye on it. I figure if we freak out over weight relative to our overall weight and power it should matter more for little riders, not less. Just trying to help him get up more climbs/clean more stuff. Next time I’d probably try ghetto tubeless for a more secure setup.
Sent from my iPhone using TGR Forums
-
09-23-2021, 09:44 PM #6132
If you don't mind me asking, how big a kid are we talking about here? My kids are pretty light, like low 40s, so while they don't weigh enough or charge hard enough yet to cause a pinch flat on a tube, I'm curious about at what point I switch them over. I.e. at what point is there some benefits to tubeless.
-
09-23-2021, 10:28 PM #6133
-
09-24-2021, 05:24 AM #6134yelgatgab
- Join Date
- Oct 2002
- Location
- Shadynasty's Jazz Club
- Posts
- 10,249
Same. Been using the OneUp for a few years. Moves a lot of air, it’s sealed so it doesn’t get grime inside, but is easy to pull apart and clean, and with the EDC kit it makes a decent weapon.
Remind me. We'll send him a red cap and a Speedo.
-
09-24-2021, 06:53 AM #6135
I probably made the switch when my two eldest boys were 5 and 6, low to mid 40s weight. They are 7 and 9 now. Like I said, I wasn’t really doing it for flats, though I don’t know if it would be too hard to pinch flat at really low pressures. Was just trying to help them get deflected less and be able to get up climbs/last a bit longer with lower rolling weight. W/ 24” stans rims I can run the older guy in the teens psi wise and he isn’t pulling that tire off at his speed/weight but he is getting deflected less and that drop in rolling weight did seem to help him in climbs. 5 year old is on a 20” full rigid spawn. He especially could get majorly deflected so easily. Kind of crazy some the stuff that would happen and he’d still hold on. It definitely has helped him both clearing stuff and trying to keep up with his brother. One came tubeless ready, the other I wanted to get wider tires anyways so I figured why not. But I feel like it’s been worth it. They were just starting to do intermediate stuff when we made that switch and were having trouble on just about any climb that had the slightest whiff of tech. Now I feel pretty good taking them on just about any intermediate trail.
Sent from my iPhone using TGR Forums
-
09-24-2021, 07:29 AM #6136
-
09-24-2021, 07:36 AM #6137
another OneUp here. I'm on 100cc fixed to bike next to water bottle with bacon and gas in. One Up EDC in stem. One Up pump doubles as a CO2 as well.
Sent from my SM-G973F using TGR Forums mobile appi dont kare i carnt spell or youse punktuation properlee, im on a skiing forum
-
09-24-2021, 08:27 AM #6138
Another vote for OneUp EDC pump. When I carry a pump, its my go to.
I have the EDC Tool with a CO2 in my stem. Tucked under my saddle (not a seat bag), I have a second C02 with valve head, a Dynaplug tool, a tire boot and a Tubolito.
Beside my bottle cage mount I have a holder for the EDC 70cc pump, which I carry for longer rides where a walk out would not be ideal. I throw in a 3rd CO2 carterage inside the EDC 70cc Pump.
But most days I ride without the pump strapped to the bike.
-
09-24-2021, 09:57 AM #6139
-
09-24-2021, 11:28 AM #6140have not
- Join Date
- Oct 2003
- Location
- the tinfoil aisle
- Posts
- 1,531
I'm stumped:
- I bought a 210mm oneup v2 dropper, instructions say check air pressure on extension before install (should be 250 - 300psi) - I do so, and it looks ok. I cycle the post before install and air whooshes out the bottom (green assembly). 10 cycles get the pressure down to 200psi.
- I return the dropper to the retailer as faulty and pick up replacement
- Same thing happens with replacement.
Am I missing something or have I received two faulty posts and need to try again? Or both? Something I'm not considering?
This post may self destruct...
-
09-24-2021, 11:31 AM #6141
-
09-24-2021, 12:06 PM #6142have not
- Join Date
- Oct 2003
- Location
- the tinfoil aisle
- Posts
- 1,531
You weren't kidding - 121 min from outreach email to a response.
-
09-24-2021, 12:12 PM #6143
yeah, I had ordered some pedals from them and didn't know there was a local code to pick them up at the warehouse here in Squamish, anyway, Canada Post had them as "delayed" on shipping for over 2 weeks, so emailed One Up, said no worries come by the warehouse and pick up a set, just return the other ones when you receive them. Solid company
-
09-24-2021, 12:13 PM #6144
Air coming out the bottom is normal, the extra space getting taken up by the upper shaft sliding into the post has to go somewhere. And the air volume in those things is tiny, connecting a pump a time or two would easily drop 50psi just from filling the pump itself up.
Edit: just saw that OneUp replied, how did I do?
-
09-24-2021, 12:31 PM #6145have not
- Join Date
- Oct 2003
- Location
- the tinfoil aisle
- Posts
- 1,531
I've sent them a vid at their request - no response yet but I did confirm that each attachment of the shock pump was dropping it by 20psi or so.
-
09-24-2021, 02:14 PM #6146
I have had the OneUp 100cc pump with EDC tool running every day for about 16 months (no riding during winter months for me). On a ride on Sunday, the pump liberated itself from my bike -- the soft rubber closure clapse snapped, and apparently the mount could not contain both my radness and the pump at the same time. Bye bye pump, tool, bacon strip/tool, tire boot... Truthfully, it was a barely moderate amount of radness but she's gone gone gone.
Has anyone had this happen to them? Closure breaking, and then losing yer pump?
OneUp gave me a "crash replacement" coupon code for 40% off, so I ordered another set. I may use a ski strap to keep it in place going forward.
Other than that minor issue, I've loved the pump. Best hand pump I've used, well-thought-out, fits the tool, and I never carry a backpack now. Just sling you leg over and start pedaling -- Love that feeling.
Also, OneUp's solid and timely response to question about warranty/crash-replacement further solidified my thumbs-up for OneUp.sproing!
-
09-24-2021, 02:23 PM #6147
-
09-24-2021, 06:33 PM #6148
Welp, blew up my X2 a while back and sent to QBP for a full rebuild. Felt amazing for half day at the park and then blown again. Fuck that noise. Great shock if you are super pro spancered and have 5 of them in the truck at all times.
Of course the shop had a barely used Push in stock tuned for my bike.
Being a bike addict is more expensive than being a crack head I bet.
-
09-24-2021, 09:42 PM #6149
I broke the little rubber strap on my OneUp pump but noticed it before the ride. Used a twist tie to secure it until the little 3 pack of straps arrived. Think it was $10 for the pack of 3? I'll probably replace the strap yearly now.
"Just send it you pussy."
-
09-24-2021, 09:50 PM #6150
I though about putting a co2 cartridge in my 100cc One Up pump and then realized that I have no desire to carry more stuff to save like 1 minute of pumping every 1-3 years when I get a flat. I’ve never used it myself but I’ve lent it to friends twice and it aired up their tires super fast. I’ve got a plug kit, spare link, zip ties and stuff crammed in there.
Bookmarks